llvm-6502/test/CodeGen/SystemZ/int-cmp-30.ll
David Blaikie 7c9c6ed761 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00

226 lines
6.5 KiB
LLVM

; Test 32-bit ordered comparisons that are really between a memory halfword
; and a constant.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s
; Check unsigned comparison near the low end of the CLHHSI range, using zero
; extension.
define double @f1(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f1:
; CHECK: clhhsi 0(%r2), 1
; CHECK-NEXT: jh
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = zext i16 %val to i32
%cond = icmp ugt i32 %ext, 1
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check unsigned comparison near the low end of the CLHHSI range, using sign
; extension.
define double @f2(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f2:
; CHECK: clhhsi 0(%r2), 1
; CHECK-NEXT: jh
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = sext i16 %val to i32
%cond = icmp ugt i32 %ext, 1
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check unsigned comparison near the high end of the CLHHSI range, using zero
; extension.
define double @f3(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f3:
; CHECK: clhhsi 0(%r2), 65534
; CHECK-NEXT: jl
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = zext i16 %val to i32
%cond = icmp ult i32 %ext, 65534
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check unsigned comparison near the high end of the CLHHSI range, using sign
; extension.
define double @f4(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f4:
; CHECK: clhhsi 0(%r2), 65534
; CHECK-NEXT: jl
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = sext i16 %val to i32
%cond = icmp ult i32 %ext, -2
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check unsigned comparison above the high end of the CLHHSI range, using zero
; extension. The condition is always true.
define double @f5(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f5:
; CHECK-NOT: clhhsi
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = zext i16 %val to i32
%cond = icmp ult i32 %ext, 65536
%res = select i1 %cond, double %a, double %b
ret double %res
}
; When using unsigned comparison with sign extension, equality with values
; in the range [32768, MAX-32769] is impossible, and ordered comparisons with
; those values are effectively sign tests. Since such comparisons are
; unlikely to occur in practice, we don't bother optimizing the second case,
; and simply ignore CLHHSI for this range. First check the low end of the
; range.
define double @f6(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f6:
; CHECK-NOT: clhhsi
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = sext i16 %val to i32
%cond = icmp ult i32 %ext, 32768
%res = select i1 %cond, double %a, double %b
ret double %res
}
; ...and then the high end.
define double @f7(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f7:
; CHECK-NOT: clhhsi
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = sext i16 %val to i32
%cond = icmp ult i32 %ext, -32769
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check signed comparison near the low end of the CLHHSI range, using zero
; extension. This is equivalent to unsigned comparison.
define double @f8(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f8:
; CHECK: clhhsi 0(%r2), 1
; CHECK-NEXT: jh
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = zext i16 %val to i32
%cond = icmp sgt i32 %ext, 1
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check signed comparison near the low end of the CLHHSI range, using sign
; extension. This should use CHHSI instead.
define double @f9(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f9:
; CHECK: chhsi 0(%r2), 1
; CHECK-NEXT: jh
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = sext i16 %val to i32
%cond = icmp sgt i32 %ext, 1
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check signed comparison near the high end of the CLHHSI range, using zero
; extension. This is equivalent to unsigned comparison.
define double @f10(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f10:
; CHECK: clhhsi 0(%r2), 65534
; CHECK-NEXT: jl
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = zext i16 %val to i32
%cond = icmp slt i32 %ext, 65534
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check signed comparison near the high end of the CLHHSI range, using sign
; extension. This should use CHHSI instead.
define double @f11(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f11:
; CHECK: chhsi 0(%r2), -2
; CHECK-NEXT: jl
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = sext i16 %val to i32
%cond = icmp slt i32 %ext, -2
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check signed comparison above the high end of the CLHHSI range, using zero
; extension. The condition is always true.
define double @f12(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f12:
; CHECK-NOT: cli
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = zext i16 %val to i32
%cond = icmp slt i32 %ext, 65536
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check signed comparison near the high end of the CHHSI range, using sign
; extension.
define double @f13(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f13:
; CHECK: chhsi 0(%r2), 32766
; CHECK-NEXT: jl
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = sext i16 %val to i32
%cond = icmp slt i32 %ext, 32766
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check signed comparison above the high end of the CHHSI range, using sign
; extension. This condition is always true.
define double @f14(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f14:
; CHECK-NOT: chhsi
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = sext i16 %val to i32
%cond = icmp slt i32 %ext, 32768
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check signed comparison near the low end of the CHHSI range, using sign
; extension.
define double @f15(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f15:
; CHECK: chhsi 0(%r2), -32767
; CHECK-NEXT: jh
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = sext i16 %val to i32
%cond = icmp sgt i32 %ext, -32767
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check signed comparison below the low end of the CHHSI range, using sign
; extension. This condition is always true.
define double @f16(double %a, double %b, i16 *%ptr) {
; CHECK-LABEL: f16:
; CHECK-NOT: chhsi
; CHECK: br %r14
%val = load i16 , i16 *%ptr
%ext = sext i16 %val to i32
%cond = icmp sgt i32 %ext, -32769
%res = select i1 %cond, double %a, double %b
ret double %res
}