llvm-6502/test/CodeGen/SystemZ/int-div-02.ll
David Blaikie 7c9c6ed761 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00

212 lines
5.4 KiB
LLVM

; Test 32-bit unsigned division and remainder.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s
declare i32 @foo()
; Test register division. The result is in the second of the two registers.
define void @f1(i32 %dummy, i32 %a, i32 %b, i32 *%dest) {
; CHECK-LABEL: f1:
; CHECK-NOT: %r3
; CHECK: {{llill|lhi}} %r2, 0
; CHECK-NOT: %r3
; CHECK: dlr %r2, %r4
; CHECK: st %r3, 0(%r5)
; CHECK: br %r14
%div = udiv i32 %a, %b
store i32 %div, i32 *%dest
ret void
}
; Test register remainder. The result is in the first of the two registers.
define void @f2(i32 %dummy, i32 %a, i32 %b, i32 *%dest) {
; CHECK-LABEL: f2:
; CHECK-NOT: %r3
; CHECK: {{llill|lhi}} %r2, 0
; CHECK-NOT: %r3
; CHECK: dlr %r2, %r4
; CHECK: st %r2, 0(%r5)
; CHECK: br %r14
%rem = urem i32 %a, %b
store i32 %rem, i32 *%dest
ret void
}
; Test that division and remainder use a single instruction.
define i32 @f3(i32 %dummy1, i32 %a, i32 %b) {
; CHECK-LABEL: f3:
; CHECK-NOT: %r3
; CHECK: {{llill|lhi}} %r2, 0
; CHECK-NOT: %r3
; CHECK: dlr %r2, %r4
; CHECK-NOT: dlr
; CHECK: or %r2, %r3
; CHECK: br %r14
%div = udiv i32 %a, %b
%rem = urem i32 %a, %b
%or = or i32 %rem, %div
ret i32 %or
}
; Test memory division with no displacement.
define void @f4(i32 %dummy, i32 %a, i32 *%src, i32 *%dest) {
; CHECK-LABEL: f4:
; CHECK-NOT: %r3
; CHECK: {{llill|lhi}} %r2, 0
; CHECK-NOT: %r3
; CHECK: dl %r2, 0(%r4)
; CHECK: st %r3, 0(%r5)
; CHECK: br %r14
%b = load i32 , i32 *%src
%div = udiv i32 %a, %b
store i32 %div, i32 *%dest
ret void
}
; Test memory remainder with no displacement.
define void @f5(i32 %dummy, i32 %a, i32 *%src, i32 *%dest) {
; CHECK-LABEL: f5:
; CHECK-NOT: %r3
; CHECK: {{llill|lhi}} %r2, 0
; CHECK-NOT: %r3
; CHECK: dl %r2, 0(%r4)
; CHECK: st %r2, 0(%r5)
; CHECK: br %r14
%b = load i32 , i32 *%src
%rem = urem i32 %a, %b
store i32 %rem, i32 *%dest
ret void
}
; Test both memory division and memory remainder.
define i32 @f6(i32 %dummy, i32 %a, i32 *%src) {
; CHECK-LABEL: f6:
; CHECK-NOT: %r3
; CHECK: {{llill|lhi}} %r2, 0
; CHECK-NOT: %r3
; CHECK: dl %r2, 0(%r4)
; CHECK-NOT: {{dl|dlr}}
; CHECK: or %r2, %r3
; CHECK: br %r14
%b = load i32 , i32 *%src
%div = udiv i32 %a, %b
%rem = urem i32 %a, %b
%or = or i32 %rem, %div
ret i32 %or
}
; Check the high end of the DL range.
define i32 @f7(i32 %dummy, i32 %a, i32 *%src) {
; CHECK-LABEL: f7:
; CHECK: dl %r2, 524284(%r4)
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%src, i64 131071
%b = load i32 , i32 *%ptr
%rem = urem i32 %a, %b
ret i32 %rem
}
; Check the next word up, which needs separate address logic.
; Other sequences besides this one would be OK.
define i32 @f8(i32 %dummy, i32 %a, i32 *%src) {
; CHECK-LABEL: f8:
; CHECK: agfi %r4, 524288
; CHECK: dl %r2, 0(%r4)
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%src, i64 131072
%b = load i32 , i32 *%ptr
%rem = urem i32 %a, %b
ret i32 %rem
}
; Check the high end of the negative aligned DL range.
define i32 @f9(i32 %dummy, i32 %a, i32 *%src) {
; CHECK-LABEL: f9:
; CHECK: dl %r2, -4(%r4)
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%src, i64 -1
%b = load i32 , i32 *%ptr
%rem = urem i32 %a, %b
ret i32 %rem
}
; Check the low end of the DL range.
define i32 @f10(i32 %dummy, i32 %a, i32 *%src) {
; CHECK-LABEL: f10:
; CHECK: dl %r2, -524288(%r4)
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%src, i64 -131072
%b = load i32 , i32 *%ptr
%rem = urem i32 %a, %b
ret i32 %rem
}
; Check the next word down, which needs separate address logic.
; Other sequences besides this one would be OK.
define i32 @f11(i32 %dummy, i32 %a, i32 *%src) {
; CHECK-LABEL: f11:
; CHECK: agfi %r4, -524292
; CHECK: dl %r2, 0(%r4)
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%src, i64 -131073
%b = load i32 , i32 *%ptr
%rem = urem i32 %a, %b
ret i32 %rem
}
; Check that DL allows an index.
define i32 @f12(i32 %dummy, i32 %a, i64 %src, i64 %index) {
; CHECK-LABEL: f12:
; CHECK: dl %r2, 524287(%r5,%r4)
; CHECK: br %r14
%add1 = add i64 %src, %index
%add2 = add i64 %add1, 524287
%ptr = inttoptr i64 %add2 to i32 *
%b = load i32 , i32 *%ptr
%rem = urem i32 %a, %b
ret i32 %rem
}
; Check that divisions of spilled values can use DL rather than DLR.
define i32 @f13(i32 *%ptr0) {
; CHECK-LABEL: f13:
; CHECK: brasl %r14, foo@PLT
; CHECK: dl {{%r[0-9]+}}, 16{{[04]}}(%r15)
; CHECK: br %r14
%ptr1 = getelementptr i32, i32 *%ptr0, i64 2
%ptr2 = getelementptr i32, i32 *%ptr0, i64 4
%ptr3 = getelementptr i32, i32 *%ptr0, i64 6
%ptr4 = getelementptr i32, i32 *%ptr0, i64 8
%ptr5 = getelementptr i32, i32 *%ptr0, i64 10
%ptr6 = getelementptr i32, i32 *%ptr0, i64 12
%ptr7 = getelementptr i32, i32 *%ptr0, i64 14
%ptr8 = getelementptr i32, i32 *%ptr0, i64 16
%ptr9 = getelementptr i32, i32 *%ptr0, i64 18
%val0 = load i32 , i32 *%ptr0
%val1 = load i32 , i32 *%ptr1
%val2 = load i32 , i32 *%ptr2
%val3 = load i32 , i32 *%ptr3
%val4 = load i32 , i32 *%ptr4
%val5 = load i32 , i32 *%ptr5
%val6 = load i32 , i32 *%ptr6
%val7 = load i32 , i32 *%ptr7
%val8 = load i32 , i32 *%ptr8
%val9 = load i32 , i32 *%ptr9
%ret = call i32 @foo()
%div0 = udiv i32 %ret, %val0
%div1 = udiv i32 %div0, %val1
%div2 = udiv i32 %div1, %val2
%div3 = udiv i32 %div2, %val3
%div4 = udiv i32 %div3, %val4
%div5 = udiv i32 %div4, %val5
%div6 = udiv i32 %div5, %val6
%div7 = udiv i32 %div6, %val7
%div8 = udiv i32 %div7, %val8
%div9 = udiv i32 %div8, %val9
ret i32 %div9
}