mirror of
https://github.com/emmanuel-marty/lzsa.git
synced 2024-11-22 05:33:58 +00:00
90 lines
6.2 KiB
Markdown
90 lines
6.2 KiB
Markdown
# Block data format (LZSA2)
|
|
|
|
Blocks encoded as LZSA2 are composed from consecutive commands. Each command follows this format:
|
|
|
|
* token: <XYZ|LL|MMM>
|
|
* optional extra literal length
|
|
* literal values
|
|
* match offset
|
|
* optional extra encoded match length
|
|
|
|
**token**
|
|
|
|
The token byte is broken down into three parts:
|
|
|
|
7 6 5 4 3 2 1 0
|
|
X Y Z L L M M M
|
|
|
|
* L: 2-bit literals length (0-2, or 3 if extended). If the number of literals for this command is 0 to 2, the length is encoded in the token and no extra bytes are required. Otherwise, a value of 3 is encoded and extra nibbles or bytes follow as 'optional extra literal length'
|
|
* M: 3-bit encoded match length (0-6, or 7 if extended). Likewise, if the encoded match length for this command is 0 to 6, it is directly stored, otherwise 7 is stored and extra nibbles or bytes follow as 'optional extra encoded match length'. Except for the last command in a block, a command always contains a match, so the encoded match length is the actual match length offset by the minimum, which is 2 bytes. For instance, an actual match length of 5 bytes to be copied, is encoded as 3.
|
|
* XYZ: 3-bit value that indicates how to decode the match offset
|
|
|
|
**optional extra literal length**
|
|
|
|
If the literals length is 3 or more, the 'L' bits in the token form the value 3, and an extra nibble is read:
|
|
|
|
* 0-14: the value is added to the 3 stored in the token, to compose the final literals length.
|
|
* 15: an extra byte follows
|
|
|
|
If an extra byte follows, it can have two possible types of value:
|
|
|
|
* 0-237: 18 is added to the value (3 from the token + 15 from the nibble), to compose the final literals length. For instance a length of 206 will be stored as 3 in the token + a nibble with the value of 15 + a single byte with the value of 188.
|
|
* 239: a second and third byte follow, forming a little-endian 16-bit value. The final literals value is that 16-bit value. For instance, a literals length of 1027 is stored as 3 in the token, a nibble with the value of 15, then byte values of 239, 3 and 4, as 3 + (4 * 256) = 1027.
|
|
|
|
**literal values**
|
|
|
|
Literal bytes, whose number is specified by the literals length, follow here. There can be zero literals in a command.
|
|
|
|
Important note: for blocks that are part of a stream, the last command in a block ends here, as it always contains literals only. For raw blocks, the last command does contain the match offset and match length, see the note below for EOD detection.
|
|
|
|
**match offset**
|
|
|
|
The match offset is decoded according to the XYZ bits in the token
|
|
|
|
XYZ
|
|
00Z 5-bit offset: read a nibble for offset bits 1-4 and use the inverted bit Z of the token as bit 0 of the offset. set bits 5-15 of the offset to 1.
|
|
01Z 9-bit offset: read a byte for offset bits 0-7 and use the inverted bit Z for bit 8 of the offset. set bits 9-15 of the offset to 1.
|
|
10Z 13-bit offset: read a nibble for offset bits 9-12 and use the inverted bit Z for bit 8 of the offset, then read a byte for offset bits 0-7. set bits 13-15 of the offset to 1. substract 512 from the offset to get the final value.
|
|
110 16-bit offset: read a byte for offset bits 8-15, then another byte for offset bits 0-7.
|
|
111 repeat offset: reuse the offset value of the previous match command.
|
|
|
|
The bit ordering and inversion helps optimize the decoder for size and speed on 8-bit CPUs.
|
|
|
|
**important note regarding match offsets: stored as negative values**
|
|
|
|
Note that the match offset is negative: it is added to the current decompressed location and not substracted, in order to locate the back-reference to copy. For this reason, as already indicated, unexpressed offset bits are set to 1 instead of 0.
|
|
|
|
**optional extra encoded match length**
|
|
|
|
If the encoded match length is 7 or more, the 'M' bits in the token form the value 7, and an extra nibble is read:
|
|
|
|
* 0-14: the value is added to the 3 stored in the token, and then the minmatch of 2 is added, to compose the final match length.
|
|
* 15: an extra byte follows
|
|
|
|
If an extra byte follows here, it can have two possible types of value:
|
|
|
|
* 0-231: 24 is added to the value (7 from the token + 15 from the nibble + minmatch of 2), to compose the final match length. For instance a length of 150 will be stored as 7 in the token + a nibble with the value of 15 + a single byte with the value of 126.
|
|
* 233: a second and third byte follow, forming a little-endian 16-bit value. The final encoded match length is that 16-bit value.
|
|
|
|
# End Of Data detection for raw blocks
|
|
|
|
When the LZSA2 block is part of a stream (see StreamFormat.md), as previously mentioned, the block ends after the literal values of the last command, without a match offset or match length.
|
|
|
|
However, in a raw LZSA2 block, the last command does include a 9-bit match offset (set to zero, to be ignored) and a EOD marker as the match length. The EOD match length marker is encoded as such: the 'M' bits in the token form the value 7, then a nibble with the value of 15 is present, then a single extra match length byte with the value of 232, indicating the end of the block. This allows the EOD test to exist in a rarely used code branch.
|
|
|
|
The EOD condition can be easily checked as part of the tri-state condition when handling long matches. When 24 is added to the match byte value:
|
|
- If the byte doesn't overflow, the final match length is ready
|
|
- If the byte overflows and equals zero, the EOD marker has been hit
|
|
- Otherwise, if the overflows and doesn't equal zero, a 16-bit match length must be read.
|
|
|
|
This tri-state test translates to only an addition and two branches on 8-bit CPUs.
|
|
|
|
The equivalent EOD condition in literal lengths (which would be byte 238, that would overflow to exactly 0 when adding 18) is never emitted, so for size-optimized decompressors, the same code can be used to read both types of lengths.
|
|
|
|
# Reading nibbles
|
|
|
|
When the specification indicates that a nibble (4 bit value) must be read:
|
|
|
|
* If there are no nibbles ready, read a byte immediately. Return the high 4 bits (bits 4-7) as the nibble and store the low 4 bits for later. Flag that a nibble is ready for next time.
|
|
* If a nibble is ready, return the previously stored low 4 bits (bits 0-3) and flag that no nibble is ready for next time.
|