mirror of
https://github.com/marqs85/ossc.git
synced 2024-05-28 21:41:30 +00:00
ac16008076
reverse LPF can be used to mostly reverse the blur on pre 1-CHIP SNES. For best results use 256x240 optimized mode.
98 lines
5.8 KiB
Tcl
98 lines
5.8 KiB
Tcl
### CPU clock constraints ###
|
|
|
|
create_clock -period 27MHz -name clk27 [get_ports clk27]
|
|
|
|
set_input_delay -clock clk27 0 [get_ports {sda scl SD_CMD SD_DAT* *ALTERA_DATA0}]
|
|
set_false_path -from [get_ports {btn* ir_rx HDMI_TX_INT_N HDMI_TX_MODE}]
|
|
set_false_path -to {sys:sys_inst|sys_pio_1:pio_1|readdata*}
|
|
|
|
|
|
### Scanconverter clock constraints ###
|
|
|
|
create_clock -period 108MHz -name pclk_hdtv [get_ports PCLK_in]
|
|
create_clock -period 27MHz -name pclk_sdtv [get_ports PCLK_in] -add
|
|
|
|
#derive_pll_clocks
|
|
create_generated_clock -master_clock pclk_sdtv -source {scanconverter_inst|pll_linedouble|altpll_component|auto_generated|pll1|inclk[0]} -multiply_by 2 -duty_cycle 50.00 -name pclk_2x {scanconverter_inst|pll_linedouble|altpll_component|auto_generated|pll1|clk[0]}
|
|
create_generated_clock -master_clock pclk_sdtv -source {scanconverter_inst|pll_linetriple|altpll_component|auto_generated|pll1|inclk[0]} -multiply_by 3 -duty_cycle 50.00 -name pclk_3x {scanconverter_inst|pll_linetriple|altpll_component|auto_generated|pll1|clk[0]}
|
|
create_generated_clock -master_clock pclk_sdtv -source {scanconverter_inst|pll_linetriple|altpll_component|auto_generated|pll1|inclk[0]} -multiply_by 4 -duty_cycle 50.00 -name pclk_4x {scanconverter_inst|pll_linetriple|altpll_component|auto_generated|pll1|clk[1]}
|
|
create_generated_clock -master_clock pclk_sdtv -source {scanconverter_inst|pll_linedouble|altpll_component|auto_generated|pll1|inclk[0]} -multiply_by 5 -duty_cycle 50.00 -name pclk_5x {scanconverter_inst|pll_linedouble|altpll_component|auto_generated|pll1|clk[1]}
|
|
|
|
derive_clock_uncertainty
|
|
|
|
# input delay constraints
|
|
set TVP_dmin 0
|
|
set TVP_dmax 1.5
|
|
set critinputs [get_ports {R_in* G_in* B_in* HSYNC_in VSYNC_in FID_in}]
|
|
set_input_delay -clock pclk_hdtv -min $TVP_dmin $critinputs
|
|
set_input_delay -clock pclk_hdtv -max $TVP_dmax $critinputs
|
|
set_input_delay -clock pclk_sdtv -min $TVP_dmin $critinputs -add_delay
|
|
set_input_delay -clock pclk_sdtv -max $TVP_dmax $critinputs -add_delay
|
|
|
|
# output delay constraints
|
|
set IT_Tsu 1.0
|
|
set IT_Th -0.5
|
|
set critoutputs_hdmi [get_ports {HDMI_TX_RD* HDMI_TX_GD* HDMI_TX_BD* HDMI_TX_DE HDMI_TX_HS HDMI_TX_VS}]
|
|
set_output_delay -reference_pin HDMI_TX_PCLK -clock pclk_hdtv -min $IT_Th $critoutputs_hdmi
|
|
set_output_delay -reference_pin HDMI_TX_PCLK -clock pclk_hdtv -max $IT_Tsu $critoutputs_hdmi
|
|
set_output_delay -reference_pin HDMI_TX_PCLK -clock pclk_2x -min $IT_Th $critoutputs_hdmi -add_delay
|
|
set_output_delay -reference_pin HDMI_TX_PCLK -clock pclk_2x -max $IT_Tsu $critoutputs_hdmi -add_delay
|
|
set_output_delay -reference_pin HDMI_TX_PCLK -clock pclk_3x -min $IT_Th $critoutputs_hdmi -add_delay
|
|
set_output_delay -reference_pin HDMI_TX_PCLK -clock pclk_3x -max $IT_Tsu $critoutputs_hdmi -add_delay
|
|
set_output_delay -reference_pin HDMI_TX_PCLK -clock pclk_4x -min $IT_Th $critoutputs_hdmi -add_delay
|
|
set_output_delay -reference_pin HDMI_TX_PCLK -clock pclk_4x -max $IT_Tsu $critoutputs_hdmi -add_delay
|
|
set_output_delay -reference_pin HDMI_TX_PCLK -clock pclk_5x -min $IT_Th $critoutputs_hdmi -add_delay
|
|
set_output_delay -reference_pin HDMI_TX_PCLK -clock pclk_5x -max $IT_Tsu $critoutputs_hdmi -add_delay
|
|
set_false_path -to [remove_from_collection [all_outputs] $critoutputs_hdmi]
|
|
|
|
|
|
### CPU/scanconverter clock relations ###
|
|
|
|
# Set hdtv pixel clock group as exclusive
|
|
set_clock_groups -exclusive -group {pclk_hdtv}
|
|
|
|
# Treat CPU clock asynchronous to pixel clocks
|
|
set_clock_groups -asynchronous -group {clk27}
|
|
|
|
# Ignore following clock transfers
|
|
set_false_path -from [get_clocks pclk_2x] -to [get_clocks {pclk_sdtv pclk_3x pclk_4x pclk_5x}]
|
|
set_false_path -from [get_clocks pclk_3x] -to [get_clocks {pclk_sdtv pclk_2x pclk_4x pclk_5x}]
|
|
set_false_path -from [get_clocks pclk_4x] -to [get_clocks {pclk_sdtv pclk_2x pclk_3x pclk_5x}]
|
|
set_false_path -from [get_clocks pclk_5x] -to [get_clocks {pclk_sdtv pclk_2x pclk_3x pclk_4x}]
|
|
|
|
# Ignore paths which would result from pclk_act switchover during postprocess chain
|
|
set pclk_act_regs [get_registers {scanconverter:scanconverter_inst|R_out* \
|
|
scanconverter:scanconverter_inst|G_out* \
|
|
scanconverter:scanconverter_inst|B_out* \
|
|
scanconverter:scanconverter_inst|HSYNC_out* \
|
|
scanconverter:scanconverter_inst|VSYNC_out* \
|
|
scanconverter:scanconverter_inst|DE_out* \
|
|
scanconverter:scanconverter_inst|*_pp1* \
|
|
scanconverter:scanconverter_inst|*_pp2* \
|
|
scanconverter:scanconverter_inst|*_pp3* \
|
|
scanconverter:scanconverter_inst|*_pp4* \
|
|
scanconverter:scanconverter_inst|*_pp5* \
|
|
scanconverter:scanconverter_inst|*_pp6*}]
|
|
set_false_path -from [get_clocks {pclk_sdtv}] -to $pclk_act_regs
|
|
set_false_path -from [get_clocks {pclk_sdtv}] -to [get_ports HDMI_TX_*]
|
|
|
|
# Ignore paths from registers which are updated only at leading edge of vsync
|
|
set_false_path -from [get_cells {scanconverter_inst|H_* scanconverter_inst|V_* scanconverter_inst|X_* scanconverter_inst|FID_1x}]
|
|
|
|
# Ignore paths from registers which are updated only at leading edge of hsync
|
|
#set_false_path -from [get_cells {scanconverter:scanconverter_inst|line_idx scanconverter:scanconverter_inst|line_out_idx* scanconverter:scanconverter_inst|hmax*}]
|
|
|
|
|
|
### JTAG Signal Constraints ###
|
|
|
|
#constrain the TCK port
|
|
#create_clock -name tck -period "10MHz" [get_ports altera_reserved_tck]
|
|
#cut all paths to and from tck
|
|
set_clock_groups -exclusive -group [get_clocks altera_reserved_tck]
|
|
#constrain the TDI port
|
|
set_input_delay -clock altera_reserved_tck 20 [get_ports altera_reserved_tdi]
|
|
#constrain the TMS port
|
|
set_input_delay -clock altera_reserved_tck 20 [get_ports altera_reserved_tms]
|
|
#constrain the TDO port
|
|
#set_output_delay -clock altera_reserved_tck 20 [get_ports altera_reserved_tdo]
|