10 KiB
X65 Directives
Directives are commands that control the assembler and include controls for conditional assembly, exporting multible binary files, creating linkable object files etc.
The directives are case insensitive and can be preceeded by a dot
.rept 8 { dc.b 1<<rept }
is the same as
REPT 8 { dc.b 1<<rept }
Some directives change behavior based on command line options, such as -endm, -xrefimp, -kickasm and -merlin.
CPU, PROCESSOR
Assemble for this target, valid options are:
- 6502
- 6502ill (illegal opcodes)
- 65c02
- 6502wdc (adds 18 extra instructions: stp, wai, bbr0-7 & bbs0-7)
- 65816
example:
cpu 6502ill
PC, ORG
Assemble as if loaded at this address
LOAD
If applicable, instruct to load at this address
EXPORT
Export this section or disable export Note that with the -xdefimp command line option this means XDEF instead and the EXPORT directive is not available.
SECTION, SEG, SEGMENT
Enable code that will be assigned a start address during a link step, or alternatively its own load address. BSS and ZP sections will not be included in the binary output, and sections can be separately exported using the EXPORT directive.
MERGE
Merge named sections in order listed
LINK
Put sections with this name at this address (must be ORG / fixed address section)
XDEF
Externally declare a symbol. When using the command line option -xdefimp EXPORT means the same thing.
XREF
Reference an external symbol. When using the command line option -xdefimp IMPORT means the same thing.
INCOBJ
Read in an object file saved from a previous build (that was assembled using the -obj command line option).
ALIGN
Add to address to make it evenly divisible by this. This only works at the start of a SECTION or in the middle of a section that is assembled to a fixed address.
MACRO, MAC
Create a macro. When used with the command line option -endm the macro ends with a ENDMACRO or ENDM directive, and if not using -endm the macro is defined within braces ( { and } ).
; standard macro usage
MACRO ldaneg(x) {
lda #-x
}
; -endm macro usage
MACRO ldaneg(x)
lda #-x
ENDM
EVAL, PRINT, ECHO
Print expression to stdout during assemble. The syntax is:
EVAL <message>: <expression>
for example
EVAL Current Address: *
test_stack = 0
eval Checking referenced function, Should be 0: .referenced(test_stack)
eval Checking defined function, Should be 1: .defined(test_stack)
DC, DV
Declare constant / Declare Value. The directive can be specific by appending .b for byte size, .w for word size, .t for triple size or .l for long size. The default size is 1 byte.
Test:
dc.b $20, *-Test
BYTE, BYTES
Same as dc.b
WORD, WORDS
Same as dc.w
LONG
Same as dc.l
TEXT
Add text to output, the order of characters can be changed with a string symbol, for instance:
STRING FontOrder = " ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789!#$%&*"
TEXT [FontOrder] "HELLO #1!"
INCLUDE
Load and assemble another file at this address.
INCBIN
Load another file and include as binary data at this address.
INCSYM
Load symbols from a .sym file
INCSYM "Main.Sym"
Symbols can also be selected by a list on the same line:
INCSYM InitMain, UpdateMain, ShutdownMain, "Main.Sym"
INCDIR
Add a folder to search for include files.
IMPORT
Generic version of INCLUDE, INCBIN with custom arguments
; include a raw binary file
IMPORT "data.bin"
IMPORT binary "data.bin"
; include a source file
IMPORT source "defines.i"
; include a binary C64 file omitting the load address (first 2 bytes)
IMPORT c64 "main.prg"
; include a text file
IMPORT text "text.txt"
IMPORT text petscii "petscii.txt"
IMPORT text petscii_shifted "petscii.txt"
IMPORT text <string symbol> "custom.txt" ; see TEXT directive
Note that if the command line argument -xdefimp is used then IMPORT is equivalent to XREF instead.
CONST
Declare a symbol as const, assgning it again will cause an error.
CONST VICBank = $4000
The constness of a symbol can be tested with the IFCONST directive or the CONST() eval function.
LABEL
Optional directive create a mutable label, a way to specify non-CONST. It has no actual function.
STRING
Declare a string symbol. Strings are a little bit limited but can be used for ordering characters in a TEXT declaration, or it can be used as assembler source.
; Some custom ordered text
TEXT [FontOrder] "MAKE IT SO!"
; Macro for (x=start; x<end; x++)
macro for.x Start, End {
ldx #Start
if Start < End
string _ForEnd = "inx\ncpx #End\nbne _ForLoop"
elif Start > End
{
if (-1 == End) & (Start<129)
string _ForEnd = "dex\nbpl _ForLoop"
else
string _ForEnd = "dex\ncpx #End\nbne _ForLoop"
endif
}
else
string _ForEnd = ""
endif
_ForLoop
}
macro forend {
_ForEnd ; _ForEnd defined by a variation of the for macro
undef _ForEnd
undef _ForLoop
}
for.x(5, 1)
lda buf1,x
sta buf2,x
forend
UNDEF
Remove a symbol
like_bananas = 1
UNDEF like_bananas
LABPOOL, POOL
Create a pool of addresses to assign as labels dynamically. This acts as a linear stack allocator for temporary storage and is deallocated when the scope ends if declared as a local symbol.
Pools can be defined as part of a larger pool.
pool zpGlobal $40-$f8 ; all zero page usage
zpGlobal pool zpLocal 16 ; temporary storage for regular functions
zpGlobal pool zpUtility 16 ; temporary storage for utility functions
zpGlobal pool zpInterrupt 8 ; temporary storage for interrupts
zpGlobal pool zpBuffer 64 ; per module storage
Allocate from a pool by using the pool name
zpBuffer zpIntroTimer.w ; frame counter, 2 bytes
zpBuffer zpScrollChar.8 ; 8 bytes of rol char for scroll
{
zpLocal .zpSrc.w ; 2 bytes source address
zpLocal .zpDst.w ; 2 bytes dest address
..
} ; at this point .zpSrc and .zpDst are deallocated and can be reused by other code.
{
zpLocal .zpCount ; 1 byte, same address as .zpSrc used above
}
IF
Begin conditional code. Whatever lines follow will be assembled only if the expression following the IF evaluates to a non-zero value, the conditional block ends with ELSE, ELSEIF or ENDIF.
conditional_code = 1
IF conditional_code
... ; this will be assembled because conditional_code is not zero
ENDIF
IFDEF, IFNDEF
Similar to IF but only takes one symbol and the following lines will be assembled only if the symbol was defined previously (IFDEF) or not defined previously (IFNDEF)
defined_symbol = 0
IFDEF defined_symbol
... ; this will be assembled because defined_symbol exists
ENDIF
IFCONST
Similar to IF but like IFDEF only takes one symbol and the following lines will be assembled if the symbol is CONST. The symbol should be defined prior to testing it.
CONST() is also an Eval Function that can be used to form more complex expressions using IF. IFCONST is equivalent to IF CONST()
IFBLANK, IFNBLANK
Checks if the argument exists, mostly for use in macros to test if an argument exists.
BLANK() is also an Eval Function, IFBLANK is equivalent to IF BLANK(...)
ELSE
Requires a prior IF, the following line will be assembled only if the prior conditional block was not assembled. ELSE must be terminated by an ENDIF
IF 1
lda #0
ELSE
lda #2
ENDIF
ELIF
Requires a prior IF and allows another expression check before ending the conditional blocks
IFDEF monkey
lda #monkey_value
ELIF DEFINED(zebra)
lda #zebra_value
ELSE
lda #human_value
ENDIF
ENDIF
Terminated a conditional segment of blocks.
STRUCT
Declare a set of labels offset from a base address.
Example:
STRUCT ArtSet {
word ArtTiles
word ArtColors
word ArtMasks
byte bgColor
}
Members of the structure can be referenced by the struct name dot member name:
lda ArtSetData + ArtSet.bgColor
ArtSetData:
ds SIZEOF(ArtSet)
ENUM
Declare a set of incremental labels. Values can either be assigned or one more than the previous. The default first value is 0.
enum PlayerIndex {
None = -1,
One,
Two
Three,
Four,
Count ; there are this many players
}
Enum values can be referenced by enum name dot value name:
ldx #PlayerIndex.One
{
inx
cpx #PlayerIndex.Count
bcc !
}
lda #PlayerIndex.Four
REPT, REPEAT
Repeats the code within { and } following the REPT directive and counter. Within the REPT code the symbol REPT has the current iteration count, starting at 0.
const words = 10
.rept words * 2 { dc.b rept / 2 }
If the command line option -endm is used then REPT uses ENDR instead of the braced scope so the equivalent to the above would be
.rept words * 2
dc.b rept / 2
.endr
A16, A8, XY16, XY8, I16, I8
Specific to 65816 assembly, controls the current accumulator and index register width (8 or 16 bits). Different assemblers use different names so various alternatives are allowed.
DUMMY, DUMMY_END
Creates a dummy section between DUMMY and DUMMY_END directives.
DS, RES
Define "section", Reserve. Reserves a number of bytes at the current address. The first argument is the number of bytes and the second argument is optional and is the byte to fill with. The main purpose is to reserve space in a BSS or ZP section.
SCOPE, ENDSCOPE
A specialized version of a scope, does the same this as a brace scope (code between { and }) but additionally marks all labels defined within as local. An unimplemented feature is that the scope can be named and then labels defined can be accessed outside the scope as
:: or .label (TODO!)
PUSH, PULL
Creates a stack for a mutable symbol so that it can temporarily be redefined and then restored.
do_thing = 1
IF do_thing
.. ; do thing
ENDIF
PUSH do_thing
do_thing = 0
IF do_thing
.. ; do not do thing
ENDIF
PULL do_thing
IF do_thing
.. ; restored symbol, let's do thing again!
ENDIF
ABORT, ERR
Stops assembly with an error if encountered and prints the rest of the line to the output.