mirror of
https://github.com/tjboldt/Apple2-IO-RPi.git
synced 2024-11-27 20:51:03 +00:00
28 lines
1.7 KiB
Markdown
28 lines
1.7 KiB
Markdown
## Setup starting from scratch
|
|
1. Have PCBs made from [PCBWay](https://www.pcbway.com/project/shareproject/Apple2_IO_RPi_v6_bfa4be82.html) or from the gerber and drill files in the Hardware folder or email me for a blank or fully assembled board
|
|
2. Solder chips, header and capacitors in place
|
|
3. If you have an EPROM programmer, it is preferred to pre-populate the EEPROM with the contents of AT28C68B.bin
|
|
4. Attach Raspberry Pi Zero 2 W facing outward from the card
|
|
5. Install [Raspberry Pi OS](https://www.raspberrypi.org/software/) on microSD card using a modern computer
|
|
1. Use Raspberry Pi Imager
|
|
2. Click "Choose OS"
|
|
3. Select Other => "Raspberry Pi OS Lite (64 bit)" for the Zero 2 W
|
|
4. Click on the gear icon in the bottom right
|
|
5. Enable ssh
|
|
6. Set password
|
|
7. Configure wifi
|
|
8. Set locale settings
|
|
6. Put microSD card in the RPi
|
|
7. Install the expansion card into the Apple II
|
|
8. Power on the Apple II
|
|
9. Only if you didn't have an EPROM programmer in step 3, install firmware with utility (can be found on Apple2-IO-RPi.hdv drive image in the release on GitHub)
|
|
10. Use `ssh` to connect to the RPi using the password you configured
|
|
11. `wget --no-cache -O - https://raw.githubusercontent.com/tjboldt/Apple2-IO-RPi/main/RaspberryPi/setup.sh | bash`
|
|
|
|
## Options
|
|
You can support two drives and change their drive images.
|
|
1. Modify the `ExecStart` line in `/etc/systemd/system/apple2driver.service` and make it something like the following: `ExecStart=/home/pi/Apple2-IO-RPi/RaspberryPi/apple2driver/apple2driver -d1 /home/pi/Apple2-IO-RPi/RaspberryPi/Apple2-IO-RPi.hdv -d2 /home/pi/Apple2-IO-RPi/RaspberryPi/TotalReplay401.hdv`
|
|
2. `sudo systemctl daemon-reload`
|
|
3. `sudo systemctl restart apple2driver.service`
|
|
|