mirror of
https://github.com/tjboldt/Apple2-IO-RPi.git
synced 2024-12-18 06:29:31 +00:00
26 lines
1.5 KiB
Markdown
26 lines
1.5 KiB
Markdown
## Setup starting from scratch
|
|
This is for the A2Pico board (https://github.com/oliverschmidt/a2pico)
|
|
1. DIY instructions and PCB coming but it is recommended to buy a board from Ralle Palaveev
|
|
2. Update the Pico firmware using Apple2-IO-RPi.uf2 from https://github.com/tjboldt/Apple2-IO-RPi/releases/latest
|
|
3. Attach Raspberry Pi Zero 2 W with a micro USB OTG cable
|
|
4. Install [Raspberry Pi OS](https://www.raspberrypi.org/software/) on microSD card using a modern computer
|
|
1. Use Raspberry Pi Imager
|
|
2. Click "Choose OS"
|
|
3. Select Other => "Raspberry Pi OS Lite (64 bit)" for the Zero 2 W
|
|
4. Click on the gear icon in the bottom right
|
|
5. Enable ssh
|
|
6. Set password
|
|
7. Configure wifi
|
|
8. Set locale settings
|
|
6. Put microSD card in the RPi
|
|
7. Install the expansion card into the Apple II
|
|
8. Power on the Apple II
|
|
9. Use `ssh` to connect to the RPi using the password you configured
|
|
10. `wget --no-cache -O - https://raw.githubusercontent.com/tjboldt/Apple2-IO-RPi/main/RaspberryPi/setup.sh | bash -s 1`
|
|
|
|
## Options
|
|
You can support two drives and change their drive images.
|
|
1. Modify the `ExecStart` line in `/etc/systemd/system/apple2driver.service` and make it something like the following: `ExecStart=/home/pi/Apple2-IO-RPi/RaspberryPi/apple2driver/apple2driver -cdc=true -d1 /home/pi/Apple2-IO-RPi/RaspberryPi/Apple2-IO-RPi.hdv -d2 /home/pi/Apple2-IO-RPi/RaspberryPi/TotalReplay401.hdv`
|
|
2. `sudo systemctl daemon-reload`
|
|
3. `sudo systemctl restart apple2driver.service`
|