Apple-2-HW/AppleIISd
1
0
Fork 1
mirror of https://github.com/freitz85/AppleIISd.git synced 2024-11-22 13:31:39 +00:00
Code Issues Projects Releases Wiki Activity
f685f98029
AppleIISd/spi6502b.rpt
freitz85 f685f98029 address decoder added
2017-07-05 19:22:02 +02:00

799 lines
42 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

cpldfit: version G.38 Xilinx Inc.
Fitter Report
Design Name: spi6502b Date: 5-11-2017, 2:09AM
Device Used: XC9572XL-10-PC44
Fitting Status: Successful
**************************** Resource Summary ****************************
Macrocells Product Terms Registers Pins Function Block
Used Used Used Used Inputs Used
56 /72 ( 78%) 209 /360 ( 58%) 38 /72 ( 53%) 32 /34 ( 94%) 116/216 ( 54%)
PIN RESOURCES:
Signal Type Required Mapped | Pin Type Used Remaining
------------------------------------|---------------------------------------
Input : 13 13 | I/O : 26 2
Output : 10 10 | GCK/IO : 3 0
Bidirectional : 8 8 | GTS/IO : 2 0
GCK : 1 1 | GSR/IO : 1 0
GTS : 0 0 |
GSR : 0 0 |
---- ----
Total 32 32
MACROCELL RESOURCES:
Total Macrocells Available 72
Registered Macrocells 38
Non-registered Macrocell driving I/O 15
GLOBAL RESOURCES:
Signal 'extclk' mapped onto global clock net GCK2.
Global output enable net(s) unused.
Global set/reset net(s) unused.
POWER DATA:
There are 56 macrocells in high performance mode (MCHP).
There are 0 macrocells in low power mode (MCLP).
There are a total of 56 macrocells used (MC).
End of Resource Summary
*************** Summary of Required Resources ******************
** LOGIC **
Signal Total Signals Loc Pwr Slew Pin Pin Pin Reg Init
Name Pt Used Mode Rate # Type Use State
$OpTx$INV$24__$INT 3 5 FB2_6 STD 37 I/O I
add_dec/XLXN_11 1 4 FB3_17 STD 22 I/O I RESET
b10 1 2 FB4_8 STD FAST 27 I/O O
b8 1 2 FB4_2 STD FAST 25 I/O O
b9 1 2 FB4_5 STD FAST 26 I/O O
cpha 5 7 FB1_18 STD (b) (b) RESET
cpol 5 7 FB1_16 STD (b) (b) RESET
cpu_Nirq 1 1 FB2_9 STD FAST 39 GSR/I/O O
cpu_Nirq_OBUFE/cpu_Nirq_OBUFE_TRST 2 4 FB3_18 STD (b) (b)
cpu_d<0> 5 9 FB1_5 STD FAST 2 I/O I/O
cpu_d<1> 4 8 FB1_6 STD FAST 3 I/O I/O
cpu_d<2> 4 8 FB1_8 STD FAST 4 I/O I/O
cpu_d<3> 3 7 FB1_15 STD FAST 8 I/O I/O
cpu_d<4> 5 9 FB1_17 STD FAST 9 I/O I/O
cpu_d<5> 4 8 FB3_2 STD FAST 11 I/O I/O
cpu_d<6> 3 7 FB3_5 STD FAST 12 I/O I/O
cpu_d<7> 3 7 FB3_8 STD FAST 13 I/O I/O
divisor<0> 5 7 FB1_14 STD 7 GCK/I/O I RESET
divisor<1> 5 7 FB1_13 STD (b) (b) RESET
divisor<2> 5 7 FB1_12 STD (b) (b) RESET
ece 5 7 FB1_11 STD 6 GCK/I/O GCK/I RESET
frx 5 7 FB1_10 STD (b) (b) RESET
ier 5 7 FB4_18 STD (b) (b) RESET
led 1 3 FB4_14 STD FAST 29 I/O O
ng 1 3 FB3_15 STD FAST 20 I/O O
noe 2 3 FB3_9 STD FAST 14 I/O O
shiftcnt<0> 3 4 FB2_5 STD 36 I/O I RESET
shiftcnt<1> 4 5 FB4_16 STD (b) (b) RESET
shiftcnt<2> 4 6 FB4_15 STD 33 I/O (b) RESET
shiftcnt<3> 4 7 FB4_13 STD (b) (b) RESET
shiftdone 3 6 FB4_1 STD (b) (b) RESET
shifting2 2 3 FB2_3 STD (b) (b) RESET
slaveinten 5 7 FB1_9 STD 5 GCK/I/O I RESET
spi_Nsel 5 7 FB4_11 STD FAST 28 I/O O RESET
spi_mosi 11 16 FB2_2 STD FAST 35 I/O O RESET
spi_sclk 6 7 FB4_17 STD FAST 34 I/O O RESET
spidatain<0> 4 6 FB4_12 STD (b) (b) RESET
spidatain<1> 4 5 FB4_10 STD (b) (b) RESET
spidatain<2> 4 5 FB2_13 STD (b) (b) RESET
spidatain<3> 4 5 FB2_12 STD (b) (b) RESET
spidatain<4> 4 5 FB2_11 STD 40 GTS/I/O I RESET
spidatain<5> 4 5 FB2_10 STD (b) (b) RESET
spidatain<6> 4 5 FB2_8 STD 38 I/O I RESET
spidatain<7> 4 5 FB2_7 STD (b) (b) RESET
spidataout<0> 4 7 FB1_4 STD (b) (b) RESET
spidataout<1> 4 7 FB1_3 STD (b) (b) RESET
spidataout<2> 4 7 FB1_2 STD 1 I/O (b) RESET
spidataout<3> 4 7 FB1_1 STD (b) (b) RESET
spidataout<4> 4 7 FB4_9 STD (b) (b) RESET
spidataout<5> 4 7 FB4_7 STD (b) (b) RESET
spidataout<6> 4 7 FB4_6 STD (b) (b) RESET
spidataout<7> 4 7 FB4_4 STD (b) (b) RESET
start_shifting 4 7 FB4_3 STD (b) (b) RESET
start_shifting/start_shifting_RSTF__$INT 1 2 FB2_18 STD (b) (b)
tc 3 4 FB2_4 STD (b) (b) RESET
tmo 5 7 FB1_7 STD (b) (b) RESET
** INPUTS **
Signal Loc Pin Pin Pin
Name # Type Use
Ncs2 FB3_11 18 I/O I
a10 FB2_8 38 I/O I
a8 FB2_5 36 I/O I
a9 FB2_6 37 I/O I
cpu_Nphi2 FB1_9 5 GCK/I/O I
cpu_Nres FB3_14 19 I/O I
cpu_a<0> FB3_17 22 I/O I
cpu_a<1> FB3_16 24 I/O I
cpu_rnw FB1_14 7 GCK/I/O I
extclk FB1_11 6 GCK/I/O GCK/I
nio_sel FB2_11 40 GTS/I/O I
nio_stb FB2_15 43 I/O I
spi_int FB2_14 42 GTS/I/O I
spi_miso FB2_17 44 I/O I
End of Resources
*********************Function Block Resource Summary***********************
Function # of FB Inputs Signals Total O/IO IO
Block Macrocells Used Used Pt Used Req Avail
FB1 18 31 31 82 0/5 9
FB2 13 31 31 48 2/0 9
FB3 7 20 20 16 2/3 9
FB4 18 34 34 63 6/0 7
---- ----- ----- -----
56 209 10/8 34
*********************************** FB1 ***********************************
Number of function block inputs used/remaining: 31/23
Number of signals used by logic mapping into function block: 31
Signal Total Imp Exp Unused Loc Pwr Pin Pin Pin
Name Pt Pt Pt Pt Mode # Type Use
spidataout<3> 4 0 0 1 FB1_1 STD (b) (b)
spidataout<2> 4 0 0 1 FB1_2 STD 1 I/O (b)
spidataout<1> 4 0 0 1 FB1_3 STD (b) (b)
spidataout<0> 4 0 0 1 FB1_4 STD (b) (b)
cpu_d<0> 5 0 0 0 FB1_5 STD 2 I/O I/O
cpu_d<1> 4 0 0 1 FB1_6 STD 3 I/O I/O
tmo 5 0 0 0 FB1_7 STD (b) (b)
cpu_d<2> 4 0 0 1 FB1_8 STD 4 I/O I/O
slaveinten 5 0 0 0 FB1_9 STD 5 GCK/I/O I
frx 5 0 0 0 FB1_10 STD (b) (b)
ece 5 0 0 0 FB1_11 STD 6 GCK/I/O GCK/I
divisor<2> 5 0 0 0 FB1_12 STD (b) (b)
divisor<1> 5 0 0 0 FB1_13 STD (b) (b)
divisor<0> 5 0 0 0 FB1_14 STD 7 GCK/I/O I
cpu_d<3> 3 0 0 2 FB1_15 STD 8 I/O I/O
cpol 5 0 0 0 FB1_16 STD (b) (b)
cpu_d<4> 5 0 0 0 FB1_17 STD 9 I/O I/O
cpha 5 0 0 0 FB1_18 STD (b) (b)
Signals Used by Logic in Function Block
1: cpu_d<0>.PIN 12: cpu_a<1> 22: spidatain<0>
2: cpu_d<1>.PIN 13: cpu_rnw 23: spidatain<1>
3: cpu_d<2>.PIN 14: divisor<0> 24: spidatain<2>
4: cpu_d<3>.PIN 15: divisor<1> 25: spidatain<3>
5: cpu_d<4>.PIN 16: divisor<2> 26: spidatain<4>
6: Ncs2 17: ece 27: spidataout<0>
7: cpha 18: frx 28: spidataout<1>
8: cpol 19: slaveinten 29: spidataout<2>
9: cpu_Nphi2 20: spi_Nsel 30: spidataout<3>
10: cpu_Nres 21: spi_int 31: tmo
11: cpu_a<0>
Signal 1 2 3 4 Signals FB
Name 0----+----0----+----0----+----0----+----0 Used Inputs
spidataout<3> ...X.X...XXXX................X.......... 7 7
spidataout<2> ..X..X...XXXX...............X........... 7 7
spidataout<1> .X...X...XXXX..............X............ 7 7
spidataout<0> X....X...XXXX.............X............. 7 7
cpu_d<0> .....XX.X.XXXX.....X.X.................. 9 9
cpu_d<1> .....X.XX.XXX.X.......X................. 8 8
tmo ...X.X...XXXX.................X......... 7 7
cpu_d<2> .....X..X.XXX..XX......X................ 8 8
slaveinten ....XX...XXXX.....X..................... 7 7
frx ....XX...XXXX....X...................... 7 7
ece ..X..X...XXXX...X....................... 7 7
divisor<2> ..X..X...XXXX..X........................ 7 7
divisor<1> .X...X...XXXX.X......................... 7 7
divisor<0> X....X...XXXXX.......................... 7 7
cpu_d<3> .....X..X.XXX...........X.....X......... 7 7
cpol .X...X.X.XXXX........................... 7 7
cpu_d<4> .....X..X.XXX....XX.X....X.............. 9 9
cpha X....XX..XXXX........................... 7 7
0----+----1----+----2----+----3----+----4
0 0 0 0
Legend:
Total Pt - Total product terms used by the macrocell signal
Imp Pt - Product terms imported from other macrocells
Exp Pt - Product terms exported to other macrocells
in direction shown
Unused Pt - Unused local product terms remaining in macrocell
Loc - Location where logic was mapped in device
Pwr Mode - Macrocell power mode
Pin Type/Use - I - Input GCK - Global Clock
O - Output GTS - Global Output Enable
(b) - Buried macrocell GSR - Global Set/Reset
X(@) - Signal used as input (wire-AND input) to the macrocell logic.
The number of Signals Used may exceed the number of FB Inputs Used due
to wire-ANDing in the switch matrix.
*********************************** FB2 ***********************************
Number of function block inputs used/remaining: 31/23
Number of signals used by logic mapping into function block: 31
Signal Total Imp Exp Unused Loc Pwr Pin Pin Pin
Name Pt Pt Pt Pt Mode # Type Use
(unused) 0 0 \/5 0 FB2_1 (b) (b)
spi_mosi 11 6<- 0 0 FB2_2 STD 35 I/O O
shifting2 2 0 /\1 2 FB2_3 STD (b) (b)
tc 3 0 0 2 FB2_4 STD (b) (b)
shiftcnt<0> 3 0 0 2 FB2_5 STD 36 I/O I
$OpTx$INV$24__$INT 3 0 0 2 FB2_6 STD 37 I/O I
spidatain<7> 4 0 0 1 FB2_7 STD (b) (b)
spidatain<6> 4 0 0 1 FB2_8 STD 38 I/O I
cpu_Nirq 1 0 0 4 FB2_9 STD 39 GSR/I/O O
spidatain<5> 4 0 0 1 FB2_10 STD (b) (b)
spidatain<4> 4 0 0 1 FB2_11 STD 40 GTS/I/O I
spidatain<3> 4 0 0 1 FB2_12 STD (b) (b)
spidatain<2> 4 0 0 1 FB2_13 STD (b) (b)
(unused) 0 0 0 5 FB2_14 42 GTS/I/O I
(unused) 0 0 0 5 FB2_15 43 I/O I
(unused) 0 0 0 5 FB2_16 (b)
(unused) 0 0 0 5 FB2_17 44 I/O I
start_shifting/start_shifting_RSTF__$INT
1 0 0 4 FB2_18 STD (b) (b)
Signals Used by Logic in Function Block
1: $OpTx$INV$24__$INT
12: shiftcnt<2> 22: spidataout<0>
2: Ncs2 13: shiftcnt<3> 23: spidataout<1>
3: cpu_Nirq_OBUFE/cpu_Nirq_OBUFE_TRST
14: shiftdone 24: spidataout<2>
4: cpu_Nphi2 15: shifting2 25: spidataout<3>
5: cpu_Nres 16: spidatain<1> 26: spidataout<4>
6: cpu_a<0> 17: spidatain<2> 27: spidataout<5>
7: cpu_a<1> 18: spidatain<3> 28: spidataout<6>
8: ece 19: spidatain<4> 29: spidataout<7>
9: extclk 20: spidatain<5> 30: start_shifting
10: shiftcnt<0> 21: spidatain<6> 31: tmo
11: shiftcnt<1>
Signal 1 2 3 4 Signals FB
Name 0----+----0----+----0----+----0----+----0 Used Inputs
spi_mosi X...X.....XXXXX......XXXXXXXX.X......... 16 16
shifting2 X............X...............X.......... 3 3
tc .X...XX......X.......................... 4 4
shiftcnt<0> X...X....X....X......................... 4 4
$OpTx$INV$24__$INT ...X...XX.....X..............X.......... 5 5
spidatain<7> X...X....X....X.....X................... 5 5
spidatain<6> X...X....X....X....X.................... 5 5
cpu_Nirq ..X..................................... 1 1
spidatain<5> X...X....X....X...X..................... 5 5
spidatain<4> X...X....X....X..X...................... 5 5
spidatain<3> X...X....X....X.X....................... 5 5
spidatain<2> X...X....X....XX........................ 5 5
start_shifting/start_shifting_RSTF__$INT
....X........X.......................... 2 2
0----+----1----+----2----+----3----+----4
0 0 0 0
Legend:
Total Pt - Total product terms used by the macrocell signal
Imp Pt - Product terms imported from other macrocells
Exp Pt - Product terms exported to other macrocells
in direction shown
Unused Pt - Unused local product terms remaining in macrocell
Loc - Location where logic was mapped in device
Pwr Mode - Macrocell power mode
Pin Type/Use - I - Input GCK - Global Clock
O - Output GTS - Global Output Enable
(b) - Buried macrocell GSR - Global Set/Reset
X(@) - Signal used as input (wire-AND input) to the macrocell logic.
The number of Signals Used may exceed the number of FB Inputs Used due
to wire-ANDing in the switch matrix.
*********************************** FB3 ***********************************
Number of function block inputs used/remaining: 20/34
Number of signals used by logic mapping into function block: 20
Signal Total Imp Exp Unused Loc Pwr Pin Pin Pin
Name Pt Pt Pt Pt Mode # Type Use
(unused) 0 0 0 5 FB3_1 (b)
cpu_d<5> 4 0 0 1 FB3_2 STD 11 I/O I/O
(unused) 0 0 0 5 FB3_3 (b)
(unused) 0 0 0 5 FB3_4 (b)
cpu_d<6> 3 0 0 2 FB3_5 STD 12 I/O I/O
(unused) 0 0 0 5 FB3_6 (b)
(unused) 0 0 0 5 FB3_7 (b)
cpu_d<7> 3 0 0 2 FB3_8 STD 13 I/O I/O
noe 2 0 0 3 FB3_9 STD 14 I/O O
(unused) 0 0 0 5 FB3_10 (b)
(unused) 0 0 0 5 FB3_11 18 I/O I
(unused) 0 0 0 5 FB3_12 (b)
(unused) 0 0 0 5 FB3_13 (b)
(unused) 0 0 0 5 FB3_14 19 I/O I
ng 1 0 0 4 FB3_15 STD 20 I/O O
(unused) 0 0 0 5 FB3_16 24 I/O I
add_dec/XLXN_11 1 0 0 4 FB3_17 STD 22 I/O I
cpu_Nirq_OBUFE/cpu_Nirq_OBUFE_TRST
2 0 0 3 FB3_18 STD (b) (b)
Signals Used by Logic in Function Block
1: Ncs2 8: cpu_a<1> 15: spi_int
2: a10 9: cpu_rnw 16: spidatain<5>
3: a8 10: ier 17: spidatain<6>
4: a9 11: nio_sel 18: spidatain<7>
5: add_dec/XLXN_11 12: nio_stb 19: start_shifting
6: cpu_Nphi2 13: shifting2 20: tc
7: cpu_a<0> 14: slaveinten
Signal 1 2 3 4 Signals FB
Name 0----+----0----+----0----+----0----+----0 Used Inputs
cpu_d<5> X....XXXX...X..X..X..................... 8 8
cpu_d<6> X....XXXXX......X....................... 7 7
cpu_d<7> X....XXXX........X.X.................... 7 7
noe ....X.....XX............................ 3 3
ng X.........XX............................ 3 3
add_dec/XLXN_11 .XXX.......X............................ 4 4
cpu_Nirq_OBUFE/cpu_Nirq_OBUFE_TRST
.........X...XX....X.................... 4 4
0----+----1----+----2----+----3----+----4
0 0 0 0
Legend:
Total Pt - Total product terms used by the macrocell signal
Imp Pt - Product terms imported from other macrocells
Exp Pt - Product terms exported to other macrocells
in direction shown
Unused Pt - Unused local product terms remaining in macrocell
Loc - Location where logic was mapped in device
Pwr Mode - Macrocell power mode
Pin Type/Use - I - Input GCK - Global Clock
O - Output GTS - Global Output Enable
(b) - Buried macrocell GSR - Global Set/Reset
X(@) - Signal used as input (wire-AND input) to the macrocell logic.
The number of Signals Used may exceed the number of FB Inputs Used due
to wire-ANDing in the switch matrix.
*********************************** FB4 ***********************************
Number of function block inputs used/remaining: 34/20
Number of signals used by logic mapping into function block: 34
Signal Total Imp Exp Unused Loc Pwr Pin Pin Pin
Name Pt Pt Pt Pt Mode # Type Use
shiftdone 3 0 0 2 FB4_1 STD (b) (b)
b8 1 0 0 4 FB4_2 STD 25 I/O O
start_shifting 4 0 0 1 FB4_3 STD (b) (b)
spidataout<7> 4 0 0 1 FB4_4 STD (b) (b)
b9 1 0 0 4 FB4_5 STD 26 I/O O
spidataout<6> 4 0 0 1 FB4_6 STD (b) (b)
spidataout<5> 4 0 0 1 FB4_7 STD (b) (b)
b10 1 0 0 4 FB4_8 STD 27 I/O O
spidataout<4> 4 0 0 1 FB4_9 STD (b) (b)
spidatain<1> 4 0 0 1 FB4_10 STD (b) (b)
spi_Nsel 5 0 0 0 FB4_11 STD 28 I/O O
spidatain<0> 4 0 0 1 FB4_12 STD (b) (b)
shiftcnt<3> 4 0 0 1 FB4_13 STD (b) (b)
led 1 0 0 4 FB4_14 STD 29 I/O O
shiftcnt<2> 4 0 0 1 FB4_15 STD 33 I/O (b)
shiftcnt<1> 4 0 \/1 0 FB4_16 STD (b) (b)
spi_sclk 6 1<- 0 0 FB4_17 STD 34 I/O O
ier 5 0 0 0 FB4_18 STD (b) (b)
Signals Used by Logic in Function Block
1: $OpTx$INV$24__$INT
13: cpu_Nres 24: shiftdone
2: cpu_d<0>.PIN 14: cpu_a<0> 25: shifting2
3: cpu_d<4>.PIN 15: cpu_a<1> 26: spi_Nsel
4: cpu_d<5>.PIN 16: cpu_rnw 27: spi_miso
5: cpu_d<6>.PIN 17: frx 28: spidatain<0>
6: cpu_d<7>.PIN 18: ier 29: spidataout<4>
7: Ncs2 19: nio_sel 30: spidataout<5>
8: a10 20: shiftcnt<0> 31: spidataout<6>
9: a8 21: shiftcnt<1> 32: spidataout<7>
10: a9 22: shiftcnt<2> 33: start_shifting
11: cpha 23: shiftcnt<3> 34: start_shifting/start_shifting_RSTF__$INT
12: cpol
Signal 1 2 3 4 Signals FB
Name 0----+----0----+----0----+----0----+----0 Used Inputs
shiftdone X...........X......XXXX................. 6 6
b8 ........X.........X..................... 2 2
start_shifting ......X......XXXX...............XX...... 7 7
spidataout<7> .....XX.....XXXX...............X........ 7 7
b9 .........X........X..................... 2 2
spidataout<6> ....X.X.....XXXX..............X......... 7 7
spidataout<5> ...X..X.....XXXX.............X.......... 7 7
b10 .......X..........X..................... 2 2
spidataout<4> ..X...X.....XXXX............X........... 7 7
spidatain<1> X...........X......X....X..X............ 5 5
spi_Nsel .X....X.....XXXX.........X.............. 7 7
spidatain<0> X...........X......X....XXX............. 6 6
shiftcnt<3> X...........X......XXXX.X............... 7 7
led ........................XX......X....... 3 3
shiftcnt<2> X...........X......XXX..X............... 6 6
shiftcnt<1> X...........X......XX...X............... 5 5
spi_sclk X.........XXX......X...XX............... 7 7
ier ....X.X.....XXXX.X...................... 7 7
0----+----1----+----2----+----3----+----4
0 0 0 0
Legend:
Total Pt - Total product terms used by the macrocell signal
Imp Pt - Product terms imported from other macrocells
Exp Pt - Product terms exported to other macrocells
in direction shown
Unused Pt - Unused local product terms remaining in macrocell
Loc - Location where logic was mapped in device
Pwr Mode - Macrocell power mode
Pin Type/Use - I - Input GCK - Global Clock
O - Output GTS - Global Output Enable
(b) - Buried macrocell GSR - Global Set/Reset
X(@) - Signal used as input (wire-AND input) to the macrocell logic.
The number of Signals Used may exceed the number of FB Inputs Used due
to wire-ANDing in the switch matrix.
;;-----------------------------------------------------------------;;
; Implemented Equations.
$OpTx$INV$24__$INT <= ((ece AND NOT extclk)
OR (NOT ece AND NOT cpu_Nphi2)
OR (NOT start_shifting AND NOT shifting2));
FDCPE_add_dec/XLXN_11: FDCPE port map (add_dec/XLXN_11,add_dec/XLXN_11_D,extclk,'0','0');
add_dec/XLXN_11_D <= (NOT nio_stb AND a9 AND a8 AND a10);
b10 <= (a10 AND nio_sel);
b8 <= (a8 AND nio_sel);
b9 <= (a9 AND nio_sel);
FTCPE_cpha: FTCPE port map (cpha,cpha_T,Ncs2,NOT cpu_Nres,'0',NOT cpu_rnw);
cpha_T <= ((cpha AND NOT cpu_a(1) AND cpu_a(0) AND NOT cpu_d(0).PIN)
OR (NOT cpha AND NOT cpu_a(1) AND cpu_a(0) AND cpu_d(0).PIN));
FTCPE_cpol: FTCPE port map (cpol,cpol_T,Ncs2,NOT cpu_Nres,'0',NOT cpu_rnw);
cpol_T <= ((cpol AND NOT cpu_a(1) AND cpu_a(0) AND NOT cpu_d(1).PIN)
OR (NOT cpol AND NOT cpu_a(1) AND cpu_a(0) AND cpu_d(1).PIN));
cpu_Nirq_I <= '0';
cpu_Nirq <= cpu_Nirq_I when cpu_Nirq_OE = '1' else 'Z';
cpu_Nirq_OE <= cpu_Nirq_OBUFE/cpu_Nirq_OBUFE_TRST;
cpu_Nirq_OBUFE/cpu_Nirq_OBUFE_TRST <= ((ier AND tc)
OR (slaveinten AND NOT spi_int));
FTCPE_divisor0: FTCPE port map (divisor(0),divisor_T(0),Ncs2,NOT cpu_Nres,'0',NOT cpu_rnw);
divisor_T(0) <= ((divisor(0) AND cpu_a(1) AND NOT cpu_a(0) AND NOT cpu_d(0).PIN)
OR (NOT divisor(0) AND cpu_a(1) AND NOT cpu_a(0) AND cpu_d(0).PIN));
FTCPE_divisor1: FTCPE port map (divisor(1),divisor_T(1),Ncs2,NOT cpu_Nres,'0',NOT cpu_rnw);
divisor_T(1) <= ((divisor(1) AND cpu_a(1) AND NOT cpu_a(0) AND NOT cpu_d(1).PIN)
OR (NOT divisor(1) AND cpu_a(1) AND NOT cpu_a(0) AND cpu_d(1).PIN));
FTCPE_divisor2: FTCPE port map (divisor(2),divisor_T(2),Ncs2,NOT cpu_Nres,'0',NOT cpu_rnw);
divisor_T(2) <= ((divisor(2) AND cpu_a(1) AND NOT cpu_a(0) AND NOT cpu_d(2).PIN)
OR (NOT divisor(2) AND cpu_a(1) AND NOT cpu_a(0) AND cpu_d(2).PIN));
FTCPE_ece: FTCPE port map (ece,ece_T,Ncs2,NOT cpu_Nres,'0',NOT cpu_rnw);
ece_T <= ((ece AND NOT cpu_a(1) AND cpu_a(0) AND NOT cpu_d(2).PIN)
OR (NOT ece AND NOT cpu_a(1) AND cpu_a(0) AND cpu_d(2).PIN));
FTCPE_frx: FTCPE port map (frx,frx_T,Ncs2,NOT cpu_Nres,'0',NOT cpu_rnw);
frx_T <= ((frx AND NOT cpu_a(1) AND cpu_a(0) AND NOT cpu_d(4).PIN)
OR (NOT frx AND NOT cpu_a(1) AND cpu_a(0) AND cpu_d(4).PIN));
FTCPE_ier: FTCPE port map (ier,ier_T,Ncs2,NOT cpu_Nres,'0',NOT cpu_rnw);
ier_T <= ((ier AND NOT cpu_a(1) AND cpu_a(0) AND NOT cpu_d(6).PIN)
OR (NOT ier AND NOT cpu_a(1) AND cpu_a(0) AND cpu_d(6).PIN));
cpu_d_I(0) <= ((NOT Ncs2 AND cpu_rnw AND spi_Nsel AND cpu_a(1) AND
cpu_a(0) AND cpu_Nphi2)
OR (NOT Ncs2 AND cpu_rnw AND cpha AND NOT cpu_a(1) AND cpu_a(0) AND
cpu_Nphi2)
OR (NOT Ncs2 AND cpu_rnw AND divisor(0) AND cpu_a(1) AND
NOT cpu_a(0) AND cpu_Nphi2)
OR (NOT Ncs2 AND cpu_rnw AND spidatain(0) AND NOT cpu_a(1) AND
NOT cpu_a(0) AND cpu_Nphi2));
cpu_d(0) <= cpu_d_I(0) when cpu_d_OE(0) = '1' else 'Z';
cpu_d_OE(0) <= (NOT Ncs2 AND cpu_rnw AND cpu_Nphi2);
cpu_d_I(1) <= ((NOT Ncs2 AND cpu_rnw AND cpol AND NOT cpu_a(1) AND cpu_a(0) AND
cpu_Nphi2)
OR (NOT Ncs2 AND cpu_rnw AND divisor(1) AND cpu_a(1) AND
NOT cpu_a(0) AND cpu_Nphi2)
OR (NOT Ncs2 AND cpu_rnw AND spidatain(1) AND NOT cpu_a(1) AND
NOT cpu_a(0) AND cpu_Nphi2));
cpu_d(1) <= cpu_d_I(1) when cpu_d_OE(1) = '1' else 'Z';
cpu_d_OE(1) <= (NOT Ncs2 AND cpu_rnw AND cpu_Nphi2);
cpu_d_I(2) <= ((NOT Ncs2 AND cpu_rnw AND ece AND NOT cpu_a(1) AND cpu_a(0) AND
cpu_Nphi2)
OR (NOT Ncs2 AND cpu_rnw AND divisor(2) AND cpu_a(1) AND
NOT cpu_a(0) AND cpu_Nphi2)
OR (NOT Ncs2 AND cpu_rnw AND spidatain(2) AND NOT cpu_a(1) AND
NOT cpu_a(0) AND cpu_Nphi2));
cpu_d(2) <= cpu_d_I(2) when cpu_d_OE(2) = '1' else 'Z';
cpu_d_OE(2) <= (NOT Ncs2 AND cpu_rnw AND cpu_Nphi2);
cpu_d_I(3) <= ((NOT Ncs2 AND cpu_rnw AND tmo AND NOT cpu_a(1) AND cpu_a(0) AND
cpu_Nphi2)
OR (NOT Ncs2 AND cpu_rnw AND spidatain(3) AND NOT cpu_a(1) AND
NOT cpu_a(0) AND cpu_Nphi2));
cpu_d(3) <= cpu_d_I(3) when cpu_d_OE(3) = '1' else 'Z';
cpu_d_OE(3) <= (NOT Ncs2 AND cpu_rnw AND cpu_Nphi2);
cpu_d_I(4) <= ((NOT Ncs2 AND cpu_rnw AND frx AND NOT cpu_a(1) AND cpu_a(0) AND
cpu_Nphi2)
OR (NOT Ncs2 AND cpu_rnw AND slaveinten AND cpu_a(1) AND
cpu_a(0) AND cpu_Nphi2)
OR (NOT Ncs2 AND cpu_rnw AND spidatain(4) AND NOT cpu_a(1) AND
NOT cpu_a(0) AND cpu_Nphi2)
OR (NOT Ncs2 AND cpu_rnw AND cpu_a(1) AND NOT cpu_a(0) AND NOT spi_int AND
cpu_Nphi2));
cpu_d(4) <= cpu_d_I(4) when cpu_d_OE(4) = '1' else 'Z';
cpu_d_OE(4) <= (NOT Ncs2 AND cpu_rnw AND cpu_Nphi2);
cpu_d_I(5) <= ((NOT Ncs2 AND cpu_rnw AND spidatain(5) AND NOT cpu_a(1) AND
NOT cpu_a(0) AND cpu_Nphi2)
OR (NOT Ncs2 AND cpu_rnw AND NOT cpu_a(1) AND start_shifting AND
cpu_a(0) AND cpu_Nphi2)
OR (NOT Ncs2 AND cpu_rnw AND NOT cpu_a(1) AND cpu_a(0) AND
shifting2 AND cpu_Nphi2));
cpu_d(5) <= cpu_d_I(5) when cpu_d_OE(5) = '1' else 'Z';
cpu_d_OE(5) <= (NOT Ncs2 AND cpu_rnw AND cpu_Nphi2);
cpu_d_I(6) <= ((NOT Ncs2 AND cpu_rnw AND ier AND NOT cpu_a(1) AND cpu_a(0) AND
cpu_Nphi2)
OR (NOT Ncs2 AND cpu_rnw AND spidatain(6) AND NOT cpu_a(1) AND
NOT cpu_a(0) AND cpu_Nphi2));
cpu_d(6) <= cpu_d_I(6) when cpu_d_OE(6) = '1' else 'Z';
cpu_d_OE(6) <= (NOT Ncs2 AND cpu_rnw AND cpu_Nphi2);
cpu_d_I(7) <= ((NOT Ncs2 AND cpu_rnw AND spidatain(7) AND NOT cpu_a(1) AND
NOT cpu_a(0) AND cpu_Nphi2)
OR (NOT Ncs2 AND cpu_rnw AND NOT cpu_a(1) AND tc AND cpu_a(0) AND
cpu_Nphi2));
cpu_d(7) <= cpu_d_I(7) when cpu_d_OE(7) = '1' else 'Z';
cpu_d_OE(7) <= (NOT Ncs2 AND cpu_rnw AND cpu_Nphi2);
FDCPE_spi_mosi: FDCPE port map (spi_mosi_I,spi_mosi,NOT $OpTx$INV$24__$INT,'0',NOT cpu_Nres);
spi_mosi <= ((EXP6_.EXP)
OR (shifting2.EXP)
OR (shiftcnt(3) AND shiftcnt(2) AND shiftcnt(1) AND
NOT shiftdone AND NOT spidataout(0) AND shifting2)
OR (NOT shiftcnt(3) AND shiftcnt(2) AND shiftcnt(1) AND
NOT shiftdone AND NOT spidataout(4) AND shifting2));
spi_mosi <= spi_mosi_I when spi_mosi_OE = '1' else 'Z';
spi_mosi_OE <= NOT tmo;
FDCPE_spi_sclk: FDCPE port map (spi_sclk,spi_sclk_D,NOT $OpTx$INV$24__$INT,spi_sclk_CLR,spi_sclk_PRE);
spi_sclk_D <= cpol
XOR
spi_sclk_D <= ((shiftcnt(1).EXP)
OR (cpu_Nres AND NOT cpha AND shiftcnt(0) AND NOT shiftdone AND
shifting2));
spi_sclk_CLR <= (NOT cpu_Nres AND NOT cpol);
spi_sclk_PRE <= (NOT cpu_Nres AND cpol);
led <= (spi_Nsel AND NOT start_shifting AND NOT shifting2);
ng <= (Ncs2 AND nio_stb AND nio_sel);
noe <= NOT (((NOT nio_stb AND add_dec/XLXN_11)
OR (NOT nio_sel AND add_dec/XLXN_11)));
FDCPE_shiftcnt0: FDCPE port map (shiftcnt(0),shiftcnt_D(0),NOT $OpTx$INV$24__$INT,NOT cpu_Nres,'0');
shiftcnt_D(0) <= (NOT shiftcnt(0) AND shifting2);
FDCPE_shiftcnt1: FDCPE port map (shiftcnt(1),shiftcnt_D(1),NOT $OpTx$INV$24__$INT,NOT cpu_Nres,'0');
shiftcnt_D(1) <= ((shiftcnt(0) AND NOT shiftcnt(1) AND shifting2)
OR (NOT shiftcnt(0) AND shiftcnt(1) AND shifting2));
FTCPE_shiftcnt2: FTCPE port map (shiftcnt(2),shiftcnt_T(2),NOT $OpTx$INV$24__$INT,NOT cpu_Nres,'0');
shiftcnt_T(2) <= ((shiftcnt(2) AND NOT shifting2)
OR (shiftcnt(0) AND shiftcnt(1) AND shifting2));
FTCPE_shiftcnt3: FTCPE port map (shiftcnt(3),shiftcnt_T(3),NOT $OpTx$INV$24__$INT,NOT cpu_Nres,'0');
shiftcnt_T(3) <= ((shiftcnt(3) AND NOT shifting2)
OR (shiftcnt(2) AND shiftcnt(0) AND shiftcnt(1) AND
shifting2));
FDCPE_shiftdone: FDCPE port map (shiftdone,shiftdone_D,NOT $OpTx$INV$24__$INT,NOT cpu_Nres,'0');
shiftdone_D <= (shiftcnt(3) AND shiftcnt(2) AND shiftcnt(0) AND
shiftcnt(1));
FDCPE_shifting2: FDCPE port map (shifting2,shifting2_D,NOT $OpTx$INV$24__$INT,'0','0');
shifting2_D <= (NOT shiftdone AND start_shifting);
FTCPE_slaveinten: FTCPE port map (slaveinten,slaveinten_T,Ncs2,NOT cpu_Nres,'0',NOT cpu_rnw);
slaveinten_T <= ((slaveinten AND cpu_a(1) AND cpu_a(0) AND NOT cpu_d(4).PIN)
OR (NOT slaveinten AND cpu_a(1) AND cpu_a(0) AND cpu_d(4).PIN));
FTCPE_spi_Nsel: FTCPE port map (spi_Nsel,spi_Nsel_T,Ncs2,'0',NOT cpu_Nres,NOT cpu_rnw);
spi_Nsel_T <= ((spi_Nsel AND cpu_a(1) AND cpu_a(0) AND NOT cpu_d(0).PIN)
OR (NOT spi_Nsel AND cpu_a(1) AND cpu_a(0) AND cpu_d(0).PIN));
FDCPE_spidatain0: FDCPE port map (spidatain(0),spidatain_D(0),NOT $OpTx$INV$24__$INT,NOT cpu_Nres,'0',spidatain_CE(0));
spidatain_D(0) <= (NOT spi_Nsel AND spi_miso);
spidatain_CE(0) <= (shiftcnt(0) AND shifting2);
FDCPE_spidatain1: FDCPE port map (spidatain(1),spidatain(0),NOT $OpTx$INV$24__$INT,NOT cpu_Nres,'0',spidatain_CE(1));
spidatain_CE(1) <= (shiftcnt(0) AND shifting2);
FDCPE_spidatain2: FDCPE port map (spidatain(2),spidatain(1),NOT $OpTx$INV$24__$INT,NOT cpu_Nres,'0',spidatain_CE(2));
spidatain_CE(2) <= (shiftcnt(0) AND shifting2);
FDCPE_spidatain3: FDCPE port map (spidatain(3),spidatain(2),NOT $OpTx$INV$24__$INT,NOT cpu_Nres,'0',spidatain_CE(3));
spidatain_CE(3) <= (shiftcnt(0) AND shifting2);
FDCPE_spidatain4: FDCPE port map (spidatain(4),spidatain(3),NOT $OpTx$INV$24__$INT,NOT cpu_Nres,'0',spidatain_CE(4));
spidatain_CE(4) <= (shiftcnt(0) AND shifting2);
FDCPE_spidatain5: FDCPE port map (spidatain(5),spidatain(4),NOT $OpTx$INV$24__$INT,NOT cpu_Nres,'0',spidatain_CE(5));
spidatain_CE(5) <= (shiftcnt(0) AND shifting2);
FDCPE_spidatain6: FDCPE port map (spidatain(6),spidatain(5),NOT $OpTx$INV$24__$INT,NOT cpu_Nres,'0',spidatain_CE(6));
spidatain_CE(6) <= (shiftcnt(0) AND shifting2);
FDCPE_spidatain7: FDCPE port map (spidatain(7),spidatain(6),NOT $OpTx$INV$24__$INT,NOT cpu_Nres,'0',spidatain_CE(7));
spidatain_CE(7) <= (shiftcnt(0) AND shifting2);
FTCPE_spidataout0: FTCPE port map (spidataout(0),spidataout_T(0),Ncs2,'0','0',spidataout_CE(0));
spidataout_T(0) <= ((NOT cpu_a(1) AND spidataout(0) AND NOT cpu_a(0) AND
NOT cpu_d(0).PIN)
OR (NOT cpu_a(1) AND NOT spidataout(0) AND NOT cpu_a(0) AND
cpu_d(0).PIN));
spidataout_CE(0) <= (cpu_Nres AND NOT cpu_rnw);
FTCPE_spidataout1: FTCPE port map (spidataout(1),spidataout_T(1),Ncs2,'0','0',spidataout_CE(1));
spidataout_T(1) <= ((NOT cpu_a(1) AND spidataout(1) AND NOT cpu_a(0) AND
NOT cpu_d(1).PIN)
OR (NOT cpu_a(1) AND NOT spidataout(1) AND NOT cpu_a(0) AND
cpu_d(1).PIN));
spidataout_CE(1) <= (cpu_Nres AND NOT cpu_rnw);
FTCPE_spidataout2: FTCPE port map (spidataout(2),spidataout_T(2),Ncs2,'0','0',spidataout_CE(2));
spidataout_T(2) <= ((NOT cpu_a(1) AND spidataout(2) AND NOT cpu_a(0) AND
NOT cpu_d(2).PIN)
OR (NOT cpu_a(1) AND NOT spidataout(2) AND NOT cpu_a(0) AND
cpu_d(2).PIN));
spidataout_CE(2) <= (cpu_Nres AND NOT cpu_rnw);
FTCPE_spidataout3: FTCPE port map (spidataout(3),spidataout_T(3),Ncs2,'0','0',spidataout_CE(3));
spidataout_T(3) <= ((NOT cpu_a(1) AND spidataout(3) AND NOT cpu_a(0) AND
NOT cpu_d(3).PIN)
OR (NOT cpu_a(1) AND NOT spidataout(3) AND NOT cpu_a(0) AND
cpu_d(3).PIN));
spidataout_CE(3) <= (cpu_Nres AND NOT cpu_rnw);
FTCPE_spidataout4: FTCPE port map (spidataout(4),spidataout_T(4),Ncs2,'0','0',spidataout_CE(4));
spidataout_T(4) <= ((NOT cpu_a(1) AND spidataout(4) AND NOT cpu_a(0) AND
NOT cpu_d(4).PIN)
OR (NOT cpu_a(1) AND NOT spidataout(4) AND NOT cpu_a(0) AND
cpu_d(4).PIN));
spidataout_CE(4) <= (cpu_Nres AND NOT cpu_rnw);
FTCPE_spidataout5: FTCPE port map (spidataout(5),spidataout_T(5),Ncs2,'0','0',spidataout_CE(5));
spidataout_T(5) <= ((NOT cpu_a(1) AND spidataout(5) AND NOT cpu_a(0) AND
NOT cpu_d(5).PIN)
OR (NOT cpu_a(1) AND NOT spidataout(5) AND NOT cpu_a(0) AND
cpu_d(5).PIN));
spidataout_CE(5) <= (cpu_Nres AND NOT cpu_rnw);
FTCPE_spidataout6: FTCPE port map (spidataout(6),spidataout_T(6),Ncs2,'0','0',spidataout_CE(6));
spidataout_T(6) <= ((NOT cpu_a(1) AND spidataout(6) AND NOT cpu_a(0) AND
NOT cpu_d(6).PIN)
OR (NOT cpu_a(1) AND NOT spidataout(6) AND NOT cpu_a(0) AND
cpu_d(6).PIN));
spidataout_CE(6) <= (cpu_Nres AND NOT cpu_rnw);
FTCPE_spidataout7: FTCPE port map (spidataout(7),spidataout_T(7),Ncs2,'0','0',spidataout_CE(7));
spidataout_T(7) <= ((NOT cpu_a(1) AND spidataout(7) AND NOT cpu_a(0) AND
NOT cpu_d(7).PIN)
OR (NOT cpu_a(1) AND NOT spidataout(7) AND NOT cpu_a(0) AND
cpu_d(7).PIN));
spidataout_CE(7) <= (cpu_Nres AND NOT cpu_rnw);
FTCPE_start_shifting: FTCPE port map (start_shifting,start_shifting_T,Ncs2,NOT start_shifting/start_shifting_RSTF__$INT,'0');
start_shifting_T <= ((NOT cpu_rnw AND NOT cpu_a(1) AND NOT start_shifting AND NOT cpu_a(0))
OR (frx AND NOT cpu_a(1) AND NOT start_shifting AND NOT cpu_a(0)));
start_shifting/start_shifting_RSTF__$INT <= (cpu_Nres AND NOT shiftdone);
FDCPE_tc: FDCPE port map (tc,'0',Ncs2,'0',shiftdone,tc_CE);
tc_CE <= (NOT cpu_a(1) AND NOT cpu_a(0));
FTCPE_tmo: FTCPE port map (tmo,tmo_T,Ncs2,NOT cpu_Nres,'0',NOT cpu_rnw);
tmo_T <= ((tmo AND NOT cpu_a(1) AND cpu_a(0) AND NOT cpu_d(3).PIN)
OR (NOT tmo AND NOT cpu_a(1) AND cpu_a(0) AND cpu_d(3).PIN));
Register Legend:
FDCPE (Q,D,C,CLR,PRE,CE);
FTCPE (Q,D,C,CLR,PRE,CE);
LDCP (Q,D,G,CLR,PRE);
**************************** Device Pin Out ****************************
Device : XC9572XL-10-PC44
--------------------------------
/6 5 4 3 2 1 44 43 42 41 40 \
| 7 39 |
| 8 38 |
| 9 37 |
| 10 36 |
| 11 XC9572XL-10-PC44 35 |
| 12 34 |
| 13 33 |
| 14 32 |
| 15 31 |
| 16 30 |
| 17 29 |
\ 18 19 20 21 22 23 24 25 26 27 28 /
--------------------------------
Pin Signal Pin Signal
No. Name No. Name
1 TIE 23 GND
2 cpu_d<0> 24 cpu_a<1>
3 cpu_d<1> 25 b8
4 cpu_d<2> 26 b9
5 cpu_Nphi2 27 b10
6 extclk 28 spi_Nsel
7 cpu_rnw 29 led
8 cpu_d<3> 30 TDO
9 cpu_d<4> 31 GND
10 GND 32 VCC
11 cpu_d<5> 33 TIE
12 cpu_d<6> 34 spi_sclk
13 cpu_d<7> 35 spi_mosi
14 noe 36 a8
15 TDI 37 a9
16 TMS 38 a10
17 TCK 39 cpu_Nirq
18 Ncs2 40 nio_sel
19 cpu_Nres 41 VCC
20 ng 42 spi_int
21 VCC 43 nio_stb
22 cpu_a<0> 44 spi_miso
Legend : NC = Not Connected, unbonded pin
PGND = Unused I/O configured as additional Ground pin
TIE = Unused I/O floating -- must tie to VCC, GND or other signal
VCC = Dedicated Power Pin
GND = Dedicated Ground Pin
TDI = Test Data In, JTAG pin
TDO = Test Data Out, JTAG pin
TCK = Test Clock, JTAG pin
TMS = Test Mode Select, JTAG pin
PE = Port Enable pin
PROHIBITED = User reserved pin
**************************** Compiler Options ****************************
Following is a list of all global compiler options used by the fitter run.
Device(s) Specified : xc9572xl-10-PC44
Optimization Method : SPEED
Multi-Level Logic Optimization : ON
Ignore Timing Specifications : OFF
Default Register Power Up Value : LOW
Keep User Location Constraints : ON
What-You-See-Is-What-You-Get : OFF
Exhaustive Fitting : OFF
Keep Unused Inputs : OFF
Slew Rate : FAST
Power Mode : STD
Set Unused I/O Pin Termination : FLOAT
Set I/O Pin Termination : KEEPER
Global Clock Optimization : ON
Global Set/Reset Optimization : ON
Global Ouput Enable Optimization : ON
Input Limit : 54
Pterm Limit : 25
Reference in New Issue View Git Blame Copy Permalink