Apple-2-HW
/
GR8RAM
mirror of https://github.com/garrettsworkshop/GR8RAM.git
1
0
Fork 1
Code Issues Projects Releases Wiki Activity

Slim down a lot

This commit is contained in:
Zane Kaminski 2023-04-14 00:22:29 -04:00
parent 3b99146a5b
commit 9a1aa44d03
41 changed files with 885 additions and 777 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
cpld/GR8RAM.qsf
View File

@ -69,7 +69,7 @@ set_global_assignment -name MUX_RESTRUCTURE ON
set_global_assignment -name STATE_MACHINE_PROCESSING "MINIMAL BITS"
set_global_assignment -name SYNTHESIS_SEED 123
set_global_assignment -name SEED 235
set_global_assignment -name AUTO_PACKED_REGISTERS_MAXII "MINIMIZE AREA"
set_global_assignment -name AUTO_PACKED_REGISTERS_MAX "MINIMIZE AREA"
set_global_assignment -name ROUTER_REGISTER_DUPLICATION OFF
set_global_assignment -name VERILOG_FILE GR8RAM.v
set_location_assignment PIN_1 -to RA[4]

142
cpld/GR8RAM.v
View File

@ -10,32 +10,21 @@ module GR8RAM(C25M, PHI0, nRES, nRESout, SetFW,
reg PHI0r1, PHI0r2;
always @(posedge C25M) begin PHI0r1 <= PHI0; PHI0r2 <= PHI0r1; end
/* Reset filter */
input nRES;
reg [3:0] nRESf = 0;
reg nRESr = 0;
/* Reset synchronization */
input nRES; reg nRESr = 0;
always @(posedge C25M) begin
nRESf[3:0] <= { nRESf[2:0], nRES };
nRESr <= nRESf[3] || nRESf[2] || nRESf[1] || nRESf[0];
if (PS==15) nRESr <= nRES;
end
/* Firmware select */
input [1:0] SetFW;
reg [1:0] SetFWr;
reg SetFWLoaded = 0;
always @(posedge C25M) begin
if (~SetFWLoaded) begin
SetFWLoaded <= 1;
SetFWr[1:0] <= SetFW[1:0];
end
end
wire [1:0] SetROM = ~SetFWr[1:0];
wire SetEN16MB = SetROM[1:0]==2'b11;
wire [1:0] SetROM = ~SetFW[1:0];
wire SetEN16MB = 0;//SetROM[1:0]==2'b11;
wire SetEN24bit = SetROM[1];
/* State counter from PHI0 rising edge */
reg [3:0] PS = 0;
wire PSStart = PS==0 && PHI0r1 && ~PHI0r2;
wire PSStart = PS==0 && PHI0r1 && !PHI0r2;
always @(posedge C25M) begin
if (PSStart) PS <= 1;
else if (PS==0) PS <= 0;
@ -64,53 +53,39 @@ module GR8RAM(C25M, PHI0, nRES, nRESout, SetFW,
input nIOSEL, nDEVSEL, nIOSTRB;
/* Apple address bus */
input [15:0] RA; input nWE;
reg [11:0] RAr; reg nWEr;
reg CXXXr;
always @(posedge PHI0) begin
CXXXr <= RA[15:12]==4'hC;
RAr[11:0] <= RA[11:0];
nWEr <= nWE;
end
input [15:0] RA; reg CXXXr;
input nWE;
always @(posedge PHI0) CXXXr <= RA[15:12]==4'hC;
/* Apple select signals */
wire ROMSpecRD = CXXXr && RAr[11:8]!=4'h0 && nWEr && ((RAr[11] && IOROMEN) || (~RAr[11]));
wire REGSpecSEL = CXXXr && RAr[11:8]==4'h0 && RAr[7] && REGEN;
wire BankSpecSEL = REGSpecSEL && RAr[3:0]==4'hF;
wire RAMRegSpecSEL = REGSpecSEL && RAr[3:0]==4'h3;
wire RAMSpecSEL = RAMRegSpecSEL && (~SetEN24bit || SetEN16MB || ~Addr[23]);
wire AddrHSpecSEL = REGSpecSEL && RAr[3:0]==4'h2;
wire AddrMSpecSEL = REGSpecSEL && RAr[3:0]==4'h1;
wire AddrLSpecSEL = REGSpecSEL && RAr[3:0]==4'h0;
wire BankSEL = REGEN && ~nDEVSEL && BankSpecSEL;
wire RAMRegSEL = ~nDEVSEL && RAMRegSpecSEL;
wire RAMSEL = ~nDEVSEL && RAMSpecSEL;
wire RAMWR = RAMSEL && ~nWEr;
wire AddrHSEL = REGEN && ~nDEVSEL && AddrHSpecSEL;
wire AddrMSEL = REGEN && ~nDEVSEL && AddrMSpecSEL;
wire AddrLSEL = REGEN && ~nDEVSEL && AddrLSpecSEL;
wire RAMExists = (~SetEN24bit || SetEN16MB || ~Addr[23]);
wire BankSEL = REGEN && !nDEVSEL && RA[3:0]==4'hF;
wire RAMSEL = REGEN && !nDEVSEL && RA[3:0]==4'h3;
wire AddrHSEL = REGEN && !nDEVSEL && RA[3:0]==4'h2;
wire AddrMSEL = REGEN && !nDEVSEL && RA[3:0]==4'h1;
wire AddrLSEL = REGEN && !nDEVSEL && RA[3:0]==4'h0;
/* IOROMEN and REGEN control */
/* IOROMEN control */
reg IOROMEN = 0;
reg REGEN = 0;
reg nIOSTRBr;
wire IOROMRES = RAr[10:0]==11'h7FF && ~nIOSTRB && ~nIOSTRBr;
always @(posedge C25M, negedge nRESr) begin
if (~nRESr) REGEN <= 0;
else if (PS==8 && ~nIOSEL) REGEN <= 1;
wire IOROMRES = !nIOSTRB && RA[10:0]==11'h7FF;
always @(posedge C25M, posedge IOROMRES) begin
if (IOROMRES) IOROMEN <= 0;
else if (!nRESr) IOROMEN <= 0;
else if (!nIOSEL) IOROMEN <= 1;
end
always @(posedge C25M) begin
nIOSTRBr <= nIOSTRB;
if (~nRESr) IOROMEN <= 0;
else if (PS==8 && IOROMRES) IOROMEN <= 0;
else if (PS==8 && ~nIOSEL) IOROMEN <= 1;
/* REGEN control */
reg REGEN = 0;
always @(posedge C25M, negedge nRESr) begin
if (!nRESr) REGEN <= 0;
else if (!nIOSEL) REGEN <= 1;
end
/* Apple data bus */
inout [7:0] RD = RDdir ? 8'bZ : RDD[7:0];
reg [7:0] RDD;
output RDdir = ~(PHI0r2 && nWE && PHI0 &&
(~nDEVSEL || ~nIOSEL || (~nIOSTRB && IOROMEN && RA[10:0]!=11'h7FF)));
output RDdir = !(PHI0r2 && nWE && PHI0 &&
((!nDEVSEL && RAMExists) || !nIOSEL || (!nIOSTRB && IOROMEN)));
/* Slinky address registers */
reg [23:0] Addr = 0;
@ -118,16 +93,16 @@ module GR8RAM(C25M, PHI0, nRES, nRESout, SetFW,
reg AddrIncM = 0;
reg AddrIncH = 0;
always @(posedge C25M, negedge nRESr) begin
if (~nRESr) begin
if (!nRESr) begin
Addr[23:0] <= 24'h000000;
AddrIncL <= 0;
AddrIncM <= 0;
AddrIncH <= 0;
end else begin
if (PS==8 && RAMRegSEL) AddrIncL <= 1;
if (PS==8 && RAMSEL) AddrIncL <= 1;
else AddrIncL <= 0;
if (PS==8 && AddrLSEL && ~nWEr) begin
if (PS==8 && AddrLSEL && !nWE) begin
Addr[7:0] <= RD[7:0];
AddrIncM <= Addr[7] && ~RD[7];
end else if (AddrIncL) begin
@ -135,7 +110,7 @@ module GR8RAM(C25M, PHI0, nRES, nRESout, SetFW,
AddrIncM <= Addr[7:0]==8'hFF;
end else AddrIncM <= 0;
if (PS==8 && AddrMSEL && ~nWEr) begin
if (PS==8 && AddrMSEL && !nWE) begin
Addr[15:8] <= RD[7:0];
AddrIncH <= Addr[15] && ~RD[7];
end else if (AddrIncM) begin
@ -143,7 +118,7 @@ module GR8RAM(C25M, PHI0, nRES, nRESout, SetFW,
AddrIncH <= Addr[15:8]==8'hFF;
end else AddrIncH <= 0;
if (PS==8 && AddrHSEL && ~nWEr) begin
if (PS==8 && AddrHSEL && !nWE) begin
Addr[23:16] <= RD[7:0];
end else if (AddrIncH) begin
Addr[23:16] <= Addr[23:16]+1;
@ -155,7 +130,7 @@ module GR8RAM(C25M, PHI0, nRES, nRESout, SetFW,
reg Bank = 0;
always @(posedge C25M, negedge nRESr) begin
if (~nRESr) Bank <= 0;
else if (PS==8 && BankSEL && ~nWEr) begin
else if (PS==8 && BankSEL && !nWE) begin
Bank <= RD[0];
end
end
@ -327,10 +302,13 @@ module GR8RAM(C25M, PHI0, nRES, nRESout, SetFW,
/* Apple data bus from SDRAM */
always @(negedge C25M) begin
if (PS==5) begin
if (AddrLSpecSEL) RDD[7:0] <= Addr[7:0];
else if (AddrMSpecSEL) RDD[7:0] <= Addr[15:8];
else if (AddrHSpecSEL) RDD[7:0] <= { SetEN24bit ? Addr[23:20] : 4'hF, Addr[19:16] };
else RDD[7:0] <= SD[7:0];
if (!nDEVSEL) case (RA[3:0])
4'h0: RDD[7:0] <= Addr[7:0];
4'h1: RDD[7:0] <= Addr[15:8];
4'h2: RDD[7:0] <= { SetEN24bit ? Addr[23:20] : 4'hF, Addr[19:16] };
4'h3: RDD[7:0] <= SD[7:0];
default: RDD[7:0] <= SD[7:0];
endcase else RDD[7:0] <= SD[7:0];
end
end
@ -344,28 +322,28 @@ module GR8RAM(C25M, PHI0, nRES, nRESout, SetFW,
always @(posedge C25M) begin
case (PS[3:0])
0: begin // NOP CKE / NOP CKD
RCKE <= PSStart && (IS==6 || (IS==7 && (ROMSpecRD || RAMSpecSEL)));
RCKE <= PSStart && (IS==6 || (IS==7 && CXXXr));
nRCS <= 1;
nRAS <= 1;
nCAS <= 1;
nSWE <= 1;
SDOE <= 0;
end 1: begin // ACT CKE / NOP CKD (ACT)
RCKE <= IS==6 || (IS==7 && (ROMSpecRD || RAMSpecSEL));
nRCS <= ~(IS==6 || (IS==7 && (ROMSpecRD || RAMSpecSEL)));
RCKE <= RCKE;
nRCS <= !RCKE;
nRAS <= 0;
nCAS <= 1;
nSWE <= 1;
SDOE <= 0;
end 2: begin // RD CKE / NOP CKD (RD)
RCKE <= IS==7 && nWEr && (ROMSpecRD || RAMSpecSEL);
nRCS <= ~(IS==7 && nWEr && (ROMSpecRD || RAMSpecSEL));
RCKE <= RCKE;
nRCS <= !RCKE;
nRAS <= 1;
nCAS <= 0;
nSWE <= 1;
SDOE <= 0;
end 3: begin // NOP CKE / CKD
RCKE <= IS==7 && nWEr && (ROMSpecRD || RAMSpecSEL);
RCKE <= RCKE;
nRCS <= 1;
nRAS <= 1;
nCAS <= 1;
@ -393,19 +371,19 @@ module GR8RAM(C25M, PHI0, nRES, nRESout, SetFW,
nSWE <= 1;
SDOE <= 0;
end 7: begin // NOP CKE / CKD
RCKE <= IS==6 || (RAMWR && IS==7);
RCKE <= IS==6 || (RAMSEL && !nWE && IS==7);
nRCS <= 1;
nRAS <= 1;
nCAS <= 1;
nSWE <= 1;
SDOE <= 0;
end 8: begin // WR AP CKE / NOP CKD (WR AP)
RCKE <= IS==6 || (RAMWR && IS==7);
nRCS <= ~(IS==6 || (RAMWR && IS==7));
RCKE <= RCKE;
nRCS <= !RCKE;
nRAS <= 1;
nCAS <= 0;
nSWE <= 0;
SDOE <= IS==6 || (RAMWR && IS==7);
SDOE <= RCKE;
end 9: begin // NOP CKE / NOP CKD
RCKE <= 1;
nRCS <= 1;
@ -421,8 +399,8 @@ module GR8RAM(C25M, PHI0, nRES, nRESout, SetFW,
nSWE <= 0;
SDOE <= 0;
end 11: begin // LDM CKE / AREF CKE / NOP CKD
RCKE <= IS==1 || IS==4 || IS==5 || IS==6 || (IS==7 && RefReqd);
nRCS <= ~(IS==1 || IS==4 || IS==5 || IS==6 || (IS==7 && RefReqd));
RCKE <= RCKE;
nRCS <= !RCKE;
nRAS <= 0;
nCAS <= 0;
nSWE <= ~(IS==1);
@ -456,25 +434,25 @@ module GR8RAM(C25M, PHI0, nRES, nRESout, SetFW,
if (IS==6) begin
SBA[1:0] <= { 2'b10 };
SA[12:0] <= { 10'b0011000100, LS[12:10] };
end else if (RAMSpecSEL) begin
end else if (nIOSEL && nIOSTRB) begin
SBA[1:0] <= { 1'b0, SetEN24bit ? Addr[23] : 1'b0 };
SA[12:10] <= SetEN24bit ? Addr[22:20] : 3'b000;
SA[9:0] <= Addr[19:10];
end else begin
SBA[1:0] <= 2'b10;
SA[12:0] <= { 10'b0011000100, Bank, RAr[11:10] };
SA[12:0] <= { 10'b0011000100, Bank, RA[11:10] };
end
end 2: begin // RD
if (RAMSpecSEL) begin
if (nIOSEL && nIOSTRB) begin
SBA[1:0] <= { 1'b0, SetEN24bit ? Addr[23] : 1'b0 };
SA[12:0] <= { 4'b0011, Addr[9:1] };
DQML <= Addr[0];
DQMH <= ~Addr[0];
end else begin
SBA[1:0] <= 2'b10;
SA[12:0] <= { 4'b0011, RAr[9:1]};
DQML <= RAr[0];
DQMH <= ~RAr[0];
SA[12:0] <= { 4'b0011, RA[9:1]};
DQML <= RA[0];
DQMH <= ~RA[0];
end
end 3: begin // NOP CKE
DQML <= 1'b1;

BIN
cpld/db/GR8RAM.(0).cnf.cdb
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.(0).cnf.hdb
View File

Binary file not shown.

14
cpld/db/GR8RAM.asm.qmsg
View File

@ -1,7 +1,7 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1679994396726 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition " "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1679994396726 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Mar 28 05:06:36 2023 " "Processing started: Tue Mar 28 05:06:36 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1679994396726 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1679994396726 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off GR8RAM -c GR8RAM " "Command: quartus_asm --read_settings_files=off --write_settings_files=off GR8RAM -c GR8RAM" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1679994396726 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1679994396991 ""}
{ "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1679994397038 ""}
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1679994397038 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "13057 " "Peak virtual memory: 13057 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1679994397272 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Mar 28 05:06:37 2023 " "Processing ended: Tue Mar 28 05:06:37 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1679994397272 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1679994397272 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1679994397272 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1679994397272 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1681444899848 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition " "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1681444899862 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Apr 14 00:01:39 2023 " "Processing started: Fri Apr 14 00:01:39 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1681444899862 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1681444899862 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off GR8RAM -c GR8RAM " "Command: quartus_asm --read_settings_files=off --write_settings_files=off GR8RAM -c GR8RAM" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1681444899862 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1681444900157 ""}
{ "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1681444900188 ""}
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1681444900188 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "13056 " "Peak virtual memory: 13056 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1681444900423 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Apr 14 00:01:40 2023 " "Processing ended: Fri Apr 14 00:01:40 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1681444900423 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1681444900423 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1681444900423 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1681444900423 ""}

BIN
cpld/db/GR8RAM.asm.rdb
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.asm_labs.ddb
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.cmp.cdb
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.cmp.hdb
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.cmp.idb
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.cmp.rdb
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.cmp0.ddb
View File

Binary file not shown.

78
cpld/db/GR8RAM.fit.qmsg
View File

@ -1,40 +1,38 @@
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1679994392961 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1679994392961 ""}
{ "Info" "IMPP_MPP_USER_DEVICE" "GR8RAM EPM240T100C5 " "Selected device EPM240T100C5 for design \"GR8RAM\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1679994392961 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1679994393007 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1679994393007 ""}
{ "Info" "IFITCC_FITCC_INFO_STANDARD_FIT_COMPILATION_ON" "" "Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" { } { } 0 171004 "Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" 0 0 "Fitter" 0 -1 1679994393038 ""}
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1679994393054 ""}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM240T100I5 " "Device EPM240T100I5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1679994393132 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM240T100A5 " "Device EPM240T100A5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1679994393132 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100C5 " "Device EPM570T100C5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1679994393132 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100I5 " "Device EPM570T100I5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1679994393132 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100A5 " "Device EPM570T100A5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1679994393132 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1679994393132 ""}
{ "Info" "ISTA_SDC_FOUND" "GR8RAM.sdc " "Reading SDC File: 'GR8RAM.sdc'" { } { } 0 332104 "Reading SDC File: '%1!s!'" 0 0 "Fitter" 0 -1 1679994393225 ""}
{ "Info" "ISTA_USER_TDC_OPTIMIZATION_GOALS" "" "Detected timing requirements -- optimizing circuit to achieve only the specified requirements" { } { } 0 332129 "Detected timing requirements -- optimizing circuit to achieve only the specified requirements" 0 0 "Fitter" 0 -1 1679994393241 ""}
{ "Info" "ISTA_REPORT_CLOCKS_INFO" "Found 2 clocks " "Found 2 clocks" { { "Info" "ISTA_REPORT_CLOCKS_INFO" " Period Clock Name " " Period Clock Name" { } { } 0 332111 "%1!s!" 0 0 "Design Software" 0 -1 1679994393241 ""} { "Info" "ISTA_REPORT_CLOCKS_INFO" "======== ============ " "======== ============" { } { } 0 332111 "%1!s!" 0 0 "Design Software" 0 -1 1679994393241 ""} { "Info" "ISTA_REPORT_CLOCKS_INFO" " 40.000 C25M " " 40.000 C25M" { } { } 0 332111 "%1!s!" 0 0 "Design Software" 0 -1 1679994393241 ""} { "Info" "ISTA_REPORT_CLOCKS_INFO" " 978.000 PHI0 " " 978.000 PHI0" { } { } 0 332111 "%1!s!" 0 0 "Design Software" 0 -1 1679994393241 ""} } { } 0 332111 "%1!s!" 0 0 "Fitter" 0 -1 1679994393241 ""}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1679994393257 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1679994393257 ""}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "User Assigned Global Signals Promotion Operation " "Completed User Assigned Global Signals Promotion Operation" { } { } 0 186079 "Completed %1!s!" 0 0 "Fitter" 0 -1 1679994393257 ""}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "C25M Global clock in PIN 64 " "Automatically promoted signal \"C25M\" to use Global clock in PIN 64" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 9 -1 0 } } } 0 186215 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0 "Fitter" 0 -1 1679994393272 ""}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL" "PHI0 Global clock " "Automatically promoted some destinations of signal \"PHI0\" to use Global clock" { { "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL_SUB" "comb~0 " "Destination \"comb~0\" may be non-global or may not use global clock" { } { } 0 186217 "Destination \"%1!s!\" may be non-global or may not use global clock" 0 0 "Design Software" 0 -1 1679994393272 ""} { "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL_SUB" "PHI0r1 " "Destination \"PHI0r1\" may be non-global or may not use global clock" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 10 -1 0 } } } 0 186217 "Destination \"%1!s!\" may be non-global or may not use global clock" 0 0 "Design Software" 0 -1 1679994393272 ""} } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 9 -1 0 } } } 0 186216 "Automatically promoted some destinations of signal \"%1!s!\" to use %2!s!" 0 0 "Fitter" 0 -1 1679994393272 ""}
{ "Info" "IFYGR_FYGR_PIN_USES_INTERNAL_GLOBAL" "PHI0 " "Pin \"PHI0\" drives global clock, but is not placed in a dedicated clock pin position" { } { { "c:/intelfpga_lite/19.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/19.1/quartus/bin64/pin_planner.ppl" { PHI0 } } } { "c:/intelfpga_lite/19.1/quartus/bin64/Assignment Editor.qase" "" { Assignment "c:/intelfpga_lite/19.1/quartus/bin64/Assignment Editor.qase" 1 { { 0 "PHI0" } } } } { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 9 -1 0 } } { "temporary_test_loc" "" { Generic "Y:/Repos/GR8RAM/cpld/" { { 0 { 0 ""} 0 417 14177 15141 0 0 "" 0 "" "" } } } } } 0 186228 "Pin \"%1!s!\" drives global clock, but is not placed in a dedicated clock pin position" 0 0 "Fitter" 0 -1 1679994393272 ""}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL" "nRESr Global clock " "Automatically promoted some destinations of signal \"nRESr\" to use Global clock" { { "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL_SUB" "IOROMEN " "Destination \"IOROMEN\" may be non-global or may not use global clock" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 88 -1 0 } } } 0 186217 "Destination \"%1!s!\" may be non-global or may not use global clock" 0 0 "Design Software" 0 -1 1679994393272 ""} { "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL_SUB" "RestoreDone~0 " "Destination \"RestoreDone~0\" may be non-global or may not use global clock" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 150 -1 0 } } } 0 186217 "Destination \"%1!s!\" may be non-global or may not use global clock" 0 0 "Design Software" 0 -1 1679994393272 ""} } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 16 -1 0 } } } 0 186216 "Automatically promoted some destinations of signal \"%1!s!\" to use %2!s!" 0 0 "Fitter" 0 -1 1679994393272 ""}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Global Promotion Operation " "Completed Auto Global Promotion Operation" { } { } 0 186079 "Completed %1!s!" 0 0 "Fitter" 0 -1 1679994393272 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_FYGR_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176234 "Starting register packing" 0 0 "Fitter" 0 -1 1679994393272 ""}
{ "Extra Info" "IFSAC_FSAC_START_LUT_PACKING" "" "Moving registers into LUTs to improve timing and density" { } { } 1 176244 "Moving registers into LUTs to improve timing and density" 1 0 "Fitter" 0 -1 1679994393319 ""}
{ "Info" "IFYGR_FYGR_NO_REGS_IN_IOS_HEADER" "" "Started processing fast register assignments" { } { } 0 186468 "Started processing fast register assignments" 0 0 "Fitter" 0 -1 1679994393366 ""}
{ "Info" "IFYGR_FYGR_NO_REGS_IN_IOS_FOOTER" "" "Finished processing fast register assignments" { } { } 0 186469 "Finished processing fast register assignments" 0 0 "Fitter" 0 -1 1679994393366 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_LUT_PACKING" "00:00:00 " "Finished moving registers into LUTs: elapsed time is 00:00:00" { } { } 1 176245 "Finished moving registers into LUTs: elapsed time is %1!s!" 1 0 "Fitter" 0 -1 1679994393366 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1679994393366 ""}
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Fitter preparation operations ending: elapsed time is 00:00:00" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1679994393413 ""}
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1679994393429 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1679994393554 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1679994393804 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1679994393804 ""}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1679994394585 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:01 " "Fitter placement operations ending: elapsed time is 00:00:01" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1679994394585 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1679994394632 ""}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "31 " "Router estimated average interconnect usage is 31% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "31 X0_Y0 X8_Y5 " "Router estimated peak interconnect usage is 31% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5" { } { { "loc" "" { Generic "Y:/Repos/GR8RAM/cpld/" { { 1 { 0 "Router estimated peak interconnect usage is 31% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5"} { { 12 { 0 ""} 0 0 9 6 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1679994394866 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1679994394866 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1679994395147 ""}
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.31 " "Total time spent on timing analysis during the Fitter is 0.31 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1679994395163 ""}
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:00 " "Fitter post-fit operations ending: elapsed time is 00:00:00" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1679994395179 ""}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." { } { } 0 169174 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0 "Fitter" 0 -1 1679994395225 ""}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.fit.smsg " "Generated suppressed messages file Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1679994395272 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 3 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 3 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "13733 " "Peak virtual memory: 13733 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1679994395319 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Mar 28 05:06:35 2023 " "Processing ended: Tue Mar 28 05:06:35 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1679994395319 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:03 " "Elapsed time: 00:00:03" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1679994395319 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:04 " "Total CPU time (on all processors): 00:00:04" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1679994395319 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1679994395319 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1681444896092 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1681444896092 ""}
{ "Info" "IMPP_MPP_USER_DEVICE" "GR8RAM EPM240T100C5 " "Selected device EPM240T100C5 for design \"GR8RAM\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1681444896092 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1681444896139 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1681444896139 ""}
{ "Info" "IFITCC_FITCC_INFO_STANDARD_FIT_COMPILATION_ON" "" "Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" { } { } 0 171004 "Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" 0 0 "Fitter" 0 -1 1681444896232 ""}
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1681444896248 ""}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM240T100I5 " "Device EPM240T100I5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1681444896498 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM240T100A5 " "Device EPM240T100A5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1681444896498 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100C5 " "Device EPM570T100C5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1681444896498 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100I5 " "Device EPM570T100I5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1681444896498 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100A5 " "Device EPM570T100A5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1681444896498 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1681444896498 ""}
{ "Info" "ISTA_SDC_FOUND" "GR8RAM.sdc " "Reading SDC File: 'GR8RAM.sdc'" { } { } 0 332104 "Reading SDC File: '%1!s!'" 0 0 "Fitter" 0 -1 1681444896624 ""}
{ "Info" "ISTA_USER_TDC_OPTIMIZATION_GOALS" "" "Detected timing requirements -- optimizing circuit to achieve only the specified requirements" { } { } 0 332129 "Detected timing requirements -- optimizing circuit to achieve only the specified requirements" 0 0 "Fitter" 0 -1 1681444896639 ""}
{ "Info" "ISTA_REPORT_CLOCKS_INFO" "Found 2 clocks " "Found 2 clocks" { { "Info" "ISTA_REPORT_CLOCKS_INFO" " Period Clock Name " " Period Clock Name" { } { } 0 332111 "%1!s!" 0 0 "Design Software" 0 -1 1681444896639 ""} { "Info" "ISTA_REPORT_CLOCKS_INFO" "======== ============ " "======== ============" { } { } 0 332111 "%1!s!" 0 0 "Design Software" 0 -1 1681444896639 ""} { "Info" "ISTA_REPORT_CLOCKS_INFO" " 40.000 C25M " " 40.000 C25M" { } { } 0 332111 "%1!s!" 0 0 "Design Software" 0 -1 1681444896639 ""} { "Info" "ISTA_REPORT_CLOCKS_INFO" " 978.000 PHI0 " " 978.000 PHI0" { } { } 0 332111 "%1!s!" 0 0 "Design Software" 0 -1 1681444896639 ""} } { } 0 332111 "%1!s!" 0 0 "Fitter" 0 -1 1681444896639 ""}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1681444896639 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1681444896639 ""}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "User Assigned Global Signals Promotion Operation " "Completed User Assigned Global Signals Promotion Operation" { } { } 0 186079 "Completed %1!s!" 0 0 "Fitter" 0 -1 1681444896654 ""}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "C25M Global clock in PIN 64 " "Automatically promoted signal \"C25M\" to use Global clock in PIN 64" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 9 -1 0 } } } 0 186215 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0 "Fitter" 0 -1 1681444896670 ""}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL" "nRESr Global clock " "Automatically promoted some destinations of signal \"nRESr\" to use Global clock" { { "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL_SUB" "IOROMEN " "Destination \"IOROMEN\" may be non-global or may not use global clock" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 69 -1 0 } } } 0 186217 "Destination \"%1!s!\" may be non-global or may not use global clock" 0 0 "Design Software" 0 -1 1681444896670 ""} } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 14 -1 0 } } } 0 186216 "Automatically promoted some destinations of signal \"%1!s!\" to use %2!s!" 0 0 "Fitter" 0 -1 1681444896670 ""}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Global Promotion Operation " "Completed Auto Global Promotion Operation" { } { } 0 186079 "Completed %1!s!" 0 0 "Fitter" 0 -1 1681444896670 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_FYGR_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176234 "Starting register packing" 0 0 "Fitter" 0 -1 1681444896670 ""}
{ "Extra Info" "IFSAC_FSAC_START_LUT_PACKING" "" "Moving registers into LUTs to improve timing and density" { } { } 1 176244 "Moving registers into LUTs to improve timing and density" 1 0 "Fitter" 0 -1 1681444896702 ""}
{ "Info" "IFYGR_FYGR_NO_REGS_IN_IOS_HEADER" "" "Started processing fast register assignments" { } { } 0 186468 "Started processing fast register assignments" 0 0 "Fitter" 0 -1 1681444896748 ""}
{ "Info" "IFYGR_FYGR_NO_REGS_IN_IOS_FOOTER" "" "Finished processing fast register assignments" { } { } 0 186469 "Finished processing fast register assignments" 0 0 "Fitter" 0 -1 1681444896763 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_LUT_PACKING" "00:00:00 " "Finished moving registers into LUTs: elapsed time is 00:00:00" { } { } 1 176245 "Finished moving registers into LUTs: elapsed time is %1!s!" 1 0 "Fitter" 0 -1 1681444896763 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1681444896763 ""}
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Fitter preparation operations ending: elapsed time is 00:00:00" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1681444896810 ""}
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1681444896810 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1681444896965 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1681444897139 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1681444897139 ""}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1681444897811 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:01 " "Fitter placement operations ending: elapsed time is 00:00:01" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1681444897811 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1681444897857 ""}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "30 " "Router estimated average interconnect usage is 30% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "30 X0_Y0 X8_Y5 " "Router estimated peak interconnect usage is 30% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5" { } { { "loc" "" { Generic "Y:/Repos/GR8RAM/cpld/" { { 1 { 0 "Router estimated peak interconnect usage is 30% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5"} { { 12 { 0 ""} 0 0 9 6 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1681444898076 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1681444898076 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1681444898310 ""}
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.27 " "Total time spent on timing analysis during the Fitter is 0.27 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1681444898325 ""}
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:00 " "Fitter post-fit operations ending: elapsed time is 00:00:00" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1681444898340 ""}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." { } { } 0 169174 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0 "Fitter" 0 -1 1681444898387 ""}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.fit.smsg " "Generated suppressed messages file Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1681444898434 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 3 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 3 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "13732 " "Peak virtual memory: 13732 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1681444898489 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Apr 14 00:01:38 2023 " "Processing ended: Fri Apr 14 00:01:38 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1681444898489 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:03 " "Elapsed time: 00:00:03" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1681444898489 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:04 " "Total CPU time (on all processors): 00:00:04" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1681444898489 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1681444898489 ""}

173
cpld/db/GR8RAM.hier_info
View File

@ -31,10 +31,10 @@ C25M => WRD[5].CLK
C25M => WRD[6].CLK
C25M => WRD[7].CLK
C25M => MOSIout.CLK
C25M => FCKOE.CLK
C25M => MOSIOE.CLK
C25M => nFCS~reg0.CLK
C25M => FCS.CLK
C25M => FCKout.CLK
C25M => RestoreDone.CLK
C25M => Bank.CLK
C25M => AddrIncH.CLK
C25M => AddrIncM.CLK
@ -63,9 +63,8 @@ C25M => Addr[20].CLK
C25M => Addr[21].CLK
C25M => Addr[22].CLK
C25M => Addr[23].CLK
C25M => IOROMEN.CLK
C25M => nIOSTRBr.CLK
C25M => REGEN.CLK
C25M => IOROMEN.CLK
C25M => nRESout~reg0.CLK
C25M => LS[0].CLK
C25M => LS[1].CLK
@ -86,10 +85,6 @@ C25M => PS[1].CLK
C25M => PS[2].CLK
C25M => PS[3].CLK
C25M => nRESr.CLK
C25M => nRESf[0].CLK
C25M => nRESf[1].CLK
C25M => nRESf[2].CLK
C25M => nRESf[3].CLK
C25M => PHI0r2.CLK
C25M => PHI0r1.CLK
C25M => IS~7.DATAIN
@ -102,26 +97,21 @@ C25M => RDD[5].CLK
C25M => RDD[6].CLK
C25M => RDD[7].CLK
PHI0 => comb.IN1
PHI0 => nWEr.CLK
PHI0 => RAr[0].CLK
PHI0 => RAr[1].CLK
PHI0 => RAr[2].CLK
PHI0 => RAr[3].CLK
PHI0 => RAr[4].CLK
PHI0 => RAr[5].CLK
PHI0 => RAr[6].CLK
PHI0 => RAr[7].CLK
PHI0 => RAr[8].CLK
PHI0 => RAr[9].CLK
PHI0 => RAr[10].CLK
PHI0 => RAr[11].CLK
PHI0 => CXXXr.CLK
PHI0 => PHI0r1.DATAIN
nRES => MOSIout.OUTPUTSELECT
nRES => nRESf[0].DATAIN
nRES => nRESr.DATAIN
nRESout <= nRESout~reg0.DB_MAX_OUTPUT_PORT_TYPE
SetFW[0] => ~NO_FANOUT~
SetFW[1] => ~NO_FANOUT~
SetFW[0] => Mux1.IN7
SetFW[1] => RAMExists.IN1
SetFW[1] => RDD.OUTPUTSELECT
SetFW[1] => RDD.OUTPUTSELECT
SetFW[1] => RDD.OUTPUTSELECT
SetFW[1] => RDD.OUTPUTSELECT
SetFW[1] => SA.OUTPUTSELECT
SetFW[1] => SA.OUTPUTSELECT
SetFW[1] => SA.OUTPUTSELECT
SetFW[1] => SBA.OUTPUTSELECT
SetFW[1] => MOSIout.DATAB
INTin => INTout.DATAIN
INTout <= INTin.DB_MAX_OUTPUT_PORT_TYPE
DMAin => DMAout.DATAIN
@ -132,35 +122,92 @@ nRDYout <= <VCC>
nINHout <= <VCC>
RWout <= <VCC>
nDMAout <= <VCC>
RA[0] => RAr[0].DATAIN
RA[0] => Equal17.IN10
RA[1] => RAr[1].DATAIN
RA[1] => Equal17.IN9
RA[2] => RAr[2].DATAIN
RA[2] => Equal17.IN8
RA[3] => RAr[3].DATAIN
RA[3] => Equal17.IN7
RA[4] => RAr[4].DATAIN
RA[4] => Equal17.IN6
RA[5] => RAr[5].DATAIN
RA[5] => Equal17.IN5
RA[6] => RAr[6].DATAIN
RA[6] => Equal17.IN4
RA[7] => RAr[7].DATAIN
RA[7] => Equal17.IN3
RA[8] => RAr[8].DATAIN
RA[8] => Equal17.IN2
RA[9] => RAr[9].DATAIN
RA[9] => Equal17.IN1
RA[10] => RAr[10].DATAIN
RA[10] => Equal17.IN0
RA[11] => RAr[11].DATAIN
RA[0] => Mux11.IN17
RA[0] => Mux12.IN17
RA[0] => Mux13.IN17
RA[0] => Mux14.IN17
RA[0] => Mux15.IN16
RA[0] => Mux16.IN16
RA[0] => Mux17.IN16
RA[0] => Mux18.IN16
RA[0] => DQML.DATAA
RA[0] => Equal8.IN3
RA[0] => Equal9.IN3
RA[0] => Equal10.IN2
RA[0] => Equal11.IN3
RA[0] => Equal12.IN3
RA[0] => Equal13.IN10
RA[0] => DQMH.DATAA
RA[1] => Mux11.IN16
RA[1] => Mux12.IN16
RA[1] => Mux13.IN16
RA[1] => Mux14.IN16
RA[1] => Mux15.IN15
RA[1] => Mux16.IN15
RA[1] => Mux17.IN15
RA[1] => Mux18.IN15
RA[1] => SA.DATAA
RA[1] => Equal8.IN2
RA[1] => Equal9.IN2
RA[1] => Equal10.IN3
RA[1] => Equal11.IN2
RA[1] => Equal12.IN2
RA[1] => Equal13.IN9
RA[2] => Mux11.IN15
RA[2] => Mux12.IN15
RA[2] => Mux13.IN15
RA[2] => Mux14.IN15
RA[2] => Mux15.IN14
RA[2] => Mux16.IN14
RA[2] => Mux17.IN14
RA[2] => Mux18.IN14
RA[2] => SA.DATAA
RA[2] => Equal8.IN1
RA[2] => Equal9.IN1
RA[2] => Equal10.IN1
RA[2] => Equal11.IN1
RA[2] => Equal12.IN1
RA[2] => Equal13.IN8
RA[3] => Mux11.IN14
RA[3] => Mux12.IN14
RA[3] => Mux13.IN14
RA[3] => Mux14.IN14
RA[3] => Mux15.IN13
RA[3] => Mux16.IN13
RA[3] => Mux17.IN13
RA[3] => Mux18.IN13
RA[3] => SA.DATAA
RA[3] => Equal8.IN0
RA[3] => Equal9.IN0
RA[3] => Equal10.IN0
RA[3] => Equal11.IN0
RA[3] => Equal12.IN0
RA[3] => Equal13.IN7
RA[4] => SA.DATAA
RA[4] => Equal13.IN6
RA[5] => SA.DATAA
RA[5] => Equal13.IN5
RA[6] => SA.DATAA
RA[6] => Equal13.IN4
RA[7] => SA.DATAA
RA[7] => Equal13.IN3
RA[8] => SA.DATAA
RA[8] => Equal13.IN2
RA[9] => SA.DATAA
RA[9] => Equal13.IN1
RA[10] => SA.DATAA
RA[10] => Equal13.IN0
RA[11] => SA.DATAA
RA[12] => Equal7.IN1
RA[13] => Equal7.IN0
RA[14] => Equal7.IN3
RA[15] => Equal7.IN2
nWE => comb.IN1
nWE => nWEr.DATAIN
nWE => RCKE.IN1
nWE => always9.IN1
nWE => always8.IN1
nWE => always8.IN1
nWE => always8.IN1
RD[0] <> RD[0]
RD[1] <> RD[1]
RD[2] <> RD[2]
@ -171,17 +218,24 @@ RD[6] <> RD[6]
RD[7] <> RD[7]
RAdir <= <VCC>
RDdir <= comb.DB_MAX_OUTPUT_PORT_TYPE
nIOSEL => SA.OUTPUTSELECT
nIOSEL => comb.IN0
nIOSEL => always6.IN1
nIOSEL => always15.IN0
nIOSEL => IOROMEN.OUTPUTSELECT
nIOSEL => comb.IN1
nIOSEL => REGEN.ENA
nDEVSEL => RDD.OUTPUTSELECT
nDEVSEL => RDD.OUTPUTSELECT
nDEVSEL => RDD.OUTPUTSELECT
nDEVSEL => RDD.OUTPUTSELECT
nDEVSEL => RDD.OUTPUTSELECT
nDEVSEL => RDD.OUTPUTSELECT
nDEVSEL => RDD.OUTPUTSELECT
nDEVSEL => RDD.OUTPUTSELECT
nDEVSEL => comb.IN1
nDEVSEL => RAMSEL.IN1
nDEVSEL => FCKout.IN1
nDEVSEL => comb.IN1
nDEVSEL => RAMRegSEL.IN1
nIOSTRB => nIOSTRBr.DATAIN
nIOSTRB => comb.IN1
nDEVSEL => comb.IN1
nIOSTRB => always15.IN1
nIOSTRB => comb.IN1
nIOSTRB => IOROMRES.IN1
SBA[0] <= SBA[0]~reg0.DB_MAX_OUTPUT_PORT_TYPE
SBA[1] <= SBA[1]~reg0.DB_MAX_OUTPUT_PORT_TYPE
SA[0] <= SA[0]~reg0.DB_MAX_OUTPUT_PORT_TYPE
@ -212,10 +266,9 @@ SD[4] <> SD[4]
SD[5] <> SD[5]
SD[6] <> SD[6]
SD[7] <> SD[7]
nFCS <= nFCS~reg0.DB_MAX_OUTPUT_PORT_TYPE
FCK <= FCKout.DB_MAX_OUTPUT_PORT_TYPE
nFCS <= nFCS.DB_MAX_OUTPUT_PORT_TYPE
FCK <= FCK.DB_MAX_OUTPUT_PORT_TYPE
MISO => WRD.DATAB
MISO => RDD.DATAB
MOSI <> MOSI

BIN
cpld/db/GR8RAM.hif
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.map.cdb
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.map.hdb
View File

Binary file not shown.

41
cpld/db/GR8RAM.map.qmsg
View File

@ -1,21 +1,20 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1679994373538 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition " "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1679994373554 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Mar 28 05:06:13 2023 " "Processing started: Tue Mar 28 05:06:13 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1679994373554 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1679994373554 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off GR8RAM -c GR8RAM " "Command: quartus_map --read_settings_files=on --write_settings_files=off GR8RAM -c GR8RAM" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1679994373554 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1679994373897 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1679994373897 ""}
{ "Warning" "WVRFX_L3_VERI_XZ_EXTEND_SIGNIFICANT" "GR8RAM.v(104) " "Verilog HDL warning at GR8RAM.v(104): extended using \"x\" or \"z\"" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 104 0 0 } } } 0 10273 "Verilog HDL warning at %1!s!: extended using \"x\" or \"z\"" 1 0 "Analysis & Synthesis" 0 -1 1679994390038 ""}
{ "Warning" "WVRFX_L3_VERI_XZ_EXTEND_SIGNIFICANT" "GR8RAM.v(281) " "Verilog HDL warning at GR8RAM.v(281): extended using \"x\" or \"z\"" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 281 0 0 } } } 0 10273 "Verilog HDL warning at %1!s!: extended using \"x\" or \"z\"" 1 0 "Analysis & Synthesis" 0 -1 1679994390038 ""}
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "gr8ram.v 1 1 " "Found 1 design units, including 1 entities, in source file gr8ram.v" { { "Info" "ISGN_ENTITY_NAME" "1 GR8RAM " "Found entity 1: GR8RAM" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1679994390038 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1679994390038 ""}
{ "Info" "ISGN_START_ELABORATION_TOP" "GR8RAM " "Elaborating entity \"GR8RAM\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1679994390069 ""}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 4 GR8RAM.v(34) " "Verilog HDL assignment warning at GR8RAM.v(34): truncated value with size 32 to match size of target (4)" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 34 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1679994390085 "|GR8RAM"}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 14 GR8RAM.v(39) " "Verilog HDL assignment warning at GR8RAM.v(39): truncated value with size 32 to match size of target (14)" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 39 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1679994390085 "|GR8RAM"}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 8 GR8RAM.v(128) " "Verilog HDL assignment warning at GR8RAM.v(128): truncated value with size 32 to match size of target (8)" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 128 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1679994390085 "|GR8RAM"}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 8 GR8RAM.v(136) " "Verilog HDL assignment warning at GR8RAM.v(136): truncated value with size 32 to match size of target (8)" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 136 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1679994390085 "|GR8RAM"}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 8 GR8RAM.v(143) " "Verilog HDL assignment warning at GR8RAM.v(143): truncated value with size 32 to match size of target (8)" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 143 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1679994390085 "|GR8RAM"}
{ "Info" "ISCL_SCL_WYSIWYG_RESYNTHESIS" "0 area 0 " "Resynthesizing 0 WYSIWYG logic cells and I/Os using \"area\" technology mapper which leaves 0 WYSIWYG logic cells and I/Os untouched" { } { } 0 17026 "Resynthesizing %1!d! WYSIWYG logic cells and I/Os using \"%2!s!\" technology mapper which leaves %3!d! WYSIWYG logic cells and I/Os untouched" 0 0 "Analysis & Synthesis" 0 -1 1679994390538 ""}
{ "Warning" "WMLS_MLS_STUCK_PIN_HDR" "" "Output pins are stuck at VCC or GND" { { "Warning" "WMLS_MLS_STUCK_PIN" "nNMIout VCC " "Pin \"nNMIout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 559 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1679994390757 "|GR8RAM|nNMIout"} { "Warning" "WMLS_MLS_STUCK_PIN" "nIRQout VCC " "Pin \"nIRQout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 562 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1679994390757 "|GR8RAM|nIRQout"} { "Warning" "WMLS_MLS_STUCK_PIN" "nRDYout VCC " "Pin \"nRDYout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 561 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1679994390757 "|GR8RAM|nRDYout"} { "Warning" "WMLS_MLS_STUCK_PIN" "nINHout VCC " "Pin \"nINHout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 560 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1679994390757 "|GR8RAM|nINHout"} { "Warning" "WMLS_MLS_STUCK_PIN" "RWout VCC " "Pin \"RWout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 563 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1679994390757 "|GR8RAM|RWout"} { "Warning" "WMLS_MLS_STUCK_PIN" "nDMAout VCC " "Pin \"nDMAout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 558 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1679994390757 "|GR8RAM|nDMAout"} { "Warning" "WMLS_MLS_STUCK_PIN" "RAdir VCC " "Pin \"RAdir\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 557 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1679994390757 "|GR8RAM|RAdir"} { "Warning" "WMLS_MLS_STUCK_PIN" "SBA\[0\] GND " "Pin \"SBA\[0\]\" is stuck at GND" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 442 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1679994390757 "|GR8RAM|SBA[0]"} } { } 0 13024 "Output pins are stuck at VCC or GND" 0 0 "Analysis & Synthesis" 0 -1 1679994390757 ""}
{ "Info" "ISCL_SCL_LOST_FANOUT_MSG_HDR" "1 " "1 registers lost all their fanouts during netlist optimizations." { } { } 0 17049 "%1!d! registers lost all their fanouts during netlist optimizations." 0 0 "Analysis & Synthesis" 0 -1 1679994391085 ""}
{ "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN_HDR" "2 " "Design contains 2 input pin(s) that do not drive logic" { { "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN" "SetFW\[0\] " "No output dependent on input pin \"SetFW\[0\]\"" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 23 -1 0 } } } 0 15610 "No output dependent on input pin \"%1!s!\"" 0 0 "Design Software" 0 -1 1679994391100 "|GR8RAM|SetFW[0]"} { "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN" "SetFW\[1\] " "No output dependent on input pin \"SetFW\[1\]\"" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 23 -1 0 } } } 0 15610 "No output dependent on input pin \"%1!s!\"" 0 0 "Design Software" 0 -1 1679994391100 "|GR8RAM|SetFW[1]"} } { } 0 21074 "Design contains %1!d! input pin(s) that do not drive logic" 0 0 "Analysis & Synthesis" 0 -1 1679994391100 ""}
{ "Info" "ICUT_CUT_TM_SUMMARY" "336 " "Implemented 336 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "28 " "Implemented 28 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1679994391100 ""} { "Info" "ICUT_CUT_TM_OPINS" "35 " "Implemented 35 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1679994391100 ""} { "Info" "ICUT_CUT_TM_BIDIRS" "17 " "Implemented 17 bidirectional pins" { } { } 0 21060 "Implemented %1!d! bidirectional pins" 0 0 "Design Software" 0 -1 1679994391100 ""} { "Info" "ICUT_CUT_TM_LCELLS" "256 " "Implemented 256 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1679994391100 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1679994391100 ""}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.map.smsg " "Generated suppressed messages file Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.map.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1679994391147 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 18 s Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 18 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "13094 " "Peak virtual memory: 13094 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1679994391179 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Mar 28 05:06:31 2023 " "Processing ended: Tue Mar 28 05:06:31 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1679994391179 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:18 " "Elapsed time: 00:00:18" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1679994391179 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:39 " "Total CPU time (on all processors): 00:00:39" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1679994391179 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1679994391179 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1681444876827 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition " "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1681444876827 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Apr 14 00:01:16 2023 " "Processing started: Fri Apr 14 00:01:16 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1681444876827 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1681444876827 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off GR8RAM -c GR8RAM " "Command: quartus_map --read_settings_files=on --write_settings_files=off GR8RAM -c GR8RAM" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1681444876827 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1681444877218 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1681444877218 ""}
{ "Warning" "WVRFX_L3_VERI_XZ_EXTEND_SIGNIFICANT" "GR8RAM.v(85) " "Verilog HDL warning at GR8RAM.v(85): extended using \"x\" or \"z\"" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 85 0 0 } } } 0 10273 "Verilog HDL warning at %1!s!: extended using \"x\" or \"z\"" 1 0 "Analysis & Synthesis" 0 -1 1681444893408 ""}
{ "Warning" "WVRFX_L3_VERI_XZ_EXTEND_SIGNIFICANT" "GR8RAM.v(261) " "Verilog HDL warning at GR8RAM.v(261): extended using \"x\" or \"z\"" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 261 0 0 } } } 0 10273 "Verilog HDL warning at %1!s!: extended using \"x\" or \"z\"" 1 0 "Analysis & Synthesis" 0 -1 1681444893408 ""}
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "gr8ram.v 1 1 " "Found 1 design units, including 1 entities, in source file gr8ram.v" { { "Info" "ISGN_ENTITY_NAME" "1 GR8RAM " "Found entity 1: GR8RAM" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1681444893408 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1681444893408 ""}
{ "Info" "ISGN_START_ELABORATION_TOP" "GR8RAM " "Elaborating entity \"GR8RAM\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1681444893440 ""}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 4 GR8RAM.v(31) " "Verilog HDL assignment warning at GR8RAM.v(31): truncated value with size 32 to match size of target (4)" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 31 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1681444893455 "|GR8RAM"}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 14 GR8RAM.v(36) " "Verilog HDL assignment warning at GR8RAM.v(36): truncated value with size 32 to match size of target (14)" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 36 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1681444893455 "|GR8RAM"}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 8 GR8RAM.v(109) " "Verilog HDL assignment warning at GR8RAM.v(109): truncated value with size 32 to match size of target (8)" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 109 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1681444893455 "|GR8RAM"}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 8 GR8RAM.v(117) " "Verilog HDL assignment warning at GR8RAM.v(117): truncated value with size 32 to match size of target (8)" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 117 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1681444893455 "|GR8RAM"}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 8 GR8RAM.v(124) " "Verilog HDL assignment warning at GR8RAM.v(124): truncated value with size 32 to match size of target (8)" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 124 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1681444893455 "|GR8RAM"}
{ "Info" "ISCL_SCL_WYSIWYG_RESYNTHESIS" "0 area 0 " "Resynthesizing 0 WYSIWYG logic cells and I/Os using \"area\" technology mapper which leaves 0 WYSIWYG logic cells and I/Os untouched" { } { } 0 17026 "Resynthesizing %1!d! WYSIWYG logic cells and I/Os using \"%2!s!\" technology mapper which leaves %3!d! WYSIWYG logic cells and I/Os untouched" 0 0 "Analysis & Synthesis" 0 -1 1681444893877 ""}
{ "Warning" "WMLS_MLS_STUCK_PIN_HDR" "" "Output pins are stuck at VCC or GND" { { "Warning" "WMLS_MLS_STUCK_PIN" "nNMIout VCC " "Pin \"nNMIout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 541 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1681444894049 "|GR8RAM|nNMIout"} { "Warning" "WMLS_MLS_STUCK_PIN" "nIRQout VCC " "Pin \"nIRQout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 544 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1681444894049 "|GR8RAM|nIRQout"} { "Warning" "WMLS_MLS_STUCK_PIN" "nRDYout VCC " "Pin \"nRDYout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 543 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1681444894049 "|GR8RAM|nRDYout"} { "Warning" "WMLS_MLS_STUCK_PIN" "nINHout VCC " "Pin \"nINHout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 542 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1681444894049 "|GR8RAM|nINHout"} { "Warning" "WMLS_MLS_STUCK_PIN" "RWout VCC " "Pin \"RWout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 545 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1681444894049 "|GR8RAM|RWout"} { "Warning" "WMLS_MLS_STUCK_PIN" "nDMAout VCC " "Pin \"nDMAout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 540 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1681444894049 "|GR8RAM|nDMAout"} { "Warning" "WMLS_MLS_STUCK_PIN" "RAdir VCC " "Pin \"RAdir\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 539 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1681444894049 "|GR8RAM|RAdir"} } { } 0 13024 "Output pins are stuck at VCC or GND" 0 0 "Analysis & Synthesis" 0 -1 1681444894049 ""}
{ "Info" "ISCL_SCL_LOST_FANOUT_MSG_HDR" "1 " "1 registers lost all their fanouts during netlist optimizations." { } { } 0 17049 "%1!d! registers lost all their fanouts during netlist optimizations." 0 0 "Analysis & Synthesis" 0 -1 1681444894252 ""}
{ "Info" "ICUT_CUT_TM_SUMMARY" "305 " "Implemented 305 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "28 " "Implemented 28 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1681444894268 ""} { "Info" "ICUT_CUT_TM_OPINS" "35 " "Implemented 35 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1681444894268 ""} { "Info" "ICUT_CUT_TM_BIDIRS" "17 " "Implemented 17 bidirectional pins" { } { } 0 21060 "Implemented %1!d! bidirectional pins" 0 0 "Design Software" 0 -1 1681444894268 ""} { "Info" "ICUT_CUT_TM_LCELLS" "225 " "Implemented 225 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1681444894268 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1681444894268 ""}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.map.smsg " "Generated suppressed messages file Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.map.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1681444894331 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 14 s Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 14 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "13092 " "Peak virtual memory: 13092 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1681444894347 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Apr 14 00:01:34 2023 " "Processing ended: Fri Apr 14 00:01:34 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1681444894347 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:18 " "Elapsed time: 00:00:18" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1681444894347 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:39 " "Total CPU time (on all processors): 00:00:39" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1681444894347 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1681444894347 ""}

BIN
cpld/db/GR8RAM.map.rdb
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.pre_map.hdb
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.root_partition.map.reg_db.cdb
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.routing.rdb
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.rtlv.hdb
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.rtlv_sg.cdb
View File

Binary file not shown.

44
cpld/db/GR8RAM.sta.qmsg
View File

@ -1,22 +1,22 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1679994398756 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition " "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1679994398756 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Mar 28 05:06:38 2023 " "Processing started: Tue Mar 28 05:06:38 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1679994398756 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1679994398756 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta GR8RAM -c GR8RAM " "Command: quartus_sta GR8RAM -c GR8RAM" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1679994398756 ""}
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1679994398866 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1679994399077 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1679994399077 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1679994399112 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1679994399112 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1679994399175 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1679994399581 ""}
{ "Info" "ISTA_SDC_FOUND" "GR8RAM.sdc " "Reading SDC File: 'GR8RAM.sdc'" { } { } 0 332104 "Reading SDC File: '%1!s!'" 0 0 "Timing Analyzer" 0 -1 1679994399659 ""}
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1679994399659 ""}
{ "Info" "0" "" "Can't run Report Timing Closure Recommendations. The current device family is not supported." { } { } 0 0 "Can't run Report Timing Closure Recommendations. The current device family is not supported." 0 0 "Timing Analyzer" 0 0 1679994399690 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "setup 12.472 " "Worst-case setup slack is 12.472" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399706 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399706 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 12.472 0.000 C25M " " 12.472 0.000 C25M " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399706 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1679994399706 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 1.383 " "Worst-case hold slack is 1.383" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399706 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399706 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 1.383 0.000 C25M " " 1.383 0.000 C25M " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399706 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1679994399706 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "recovery 33.331 " "Worst-case recovery slack is 33.331" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399722 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399722 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 33.331 0.000 C25M " " 33.331 0.000 C25M " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399722 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1679994399722 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "removal 6.115 " "Worst-case removal slack is 6.115" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399722 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399722 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 6.115 0.000 C25M " " 6.115 0.000 C25M " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399722 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1679994399722 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width 19.734 " "Worst-case minimum pulse width slack is 19.734" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399722 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399722 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 19.734 0.000 C25M " " 19.734 0.000 C25M " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399722 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 488.734 0.000 PHI0 " " 488.734 0.000 PHI0 " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1679994399722 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1679994399722 ""}
{ "Info" "ISTA_METASTABILITY_REPORT_DISABLED" "" "The selected device family is not supported by the report_metastability command." { } { } 0 332001 "The selected device family is not supported by the report_metastability command." 0 0 "Timing Analyzer" 0 -1 1679994399769 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1679994399784 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1679994399784 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 1 Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "13052 " "Peak virtual memory: 13052 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1679994399847 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Mar 28 05:06:39 2023 " "Processing ended: Tue Mar 28 05:06:39 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1679994399847 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1679994399847 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1679994399847 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1679994399847 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1681444902112 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition " "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1681444902128 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Apr 14 00:01:41 2023 " "Processing started: Fri Apr 14 00:01:41 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1681444902128 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1681444902128 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta GR8RAM -c GR8RAM " "Command: quartus_sta GR8RAM -c GR8RAM" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1681444902128 ""}
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1681444902237 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1681444902472 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1681444902472 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1681444902534 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1681444902534 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1681444902597 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1681444903003 ""}
{ "Info" "ISTA_SDC_FOUND" "GR8RAM.sdc " "Reading SDC File: 'GR8RAM.sdc'" { } { } 0 332104 "Reading SDC File: '%1!s!'" 0 0 "Timing Analyzer" 0 -1 1681444903068 ""}
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1681444903083 ""}
{ "Info" "0" "" "Can't run Report Timing Closure Recommendations. The current device family is not supported." { } { } 0 0 "Can't run Report Timing Closure Recommendations. The current device family is not supported." 0 0 "Timing Analyzer" 0 0 1681444903115 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "setup 14.252 " "Worst-case setup slack is 14.252" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903130 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903130 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 14.252 0.000 C25M " " 14.252 0.000 C25M " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903130 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1681444903130 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 1.394 " "Worst-case hold slack is 1.394" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903130 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903130 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 1.394 0.000 C25M " " 1.394 0.000 C25M " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903130 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1681444903130 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "recovery 33.179 " "Worst-case recovery slack is 33.179" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903130 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903130 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 33.179 0.000 C25M " " 33.179 0.000 C25M " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903130 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1681444903130 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "removal 6.267 " "Worst-case removal slack is 6.267" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903146 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903146 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 6.267 0.000 C25M " " 6.267 0.000 C25M " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903146 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1681444903146 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width 19.734 " "Worst-case minimum pulse width slack is 19.734" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903146 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903146 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 19.734 0.000 C25M " " 19.734 0.000 C25M " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903146 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 488.734 0.000 PHI0 " " 488.734 0.000 PHI0 " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444903146 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1681444903146 ""}
{ "Info" "ISTA_METASTABILITY_REPORT_DISABLED" "" "The selected device family is not supported by the report_metastability command." { } { } 0 332001 "The selected device family is not supported by the report_metastability command." 0 0 "Timing Analyzer" 0 -1 1681444903193 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1681444903208 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1681444903224 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 1 Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "13051 " "Peak virtual memory: 13051 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1681444903292 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Apr 14 00:01:43 2023 " "Processing ended: Fri Apr 14 00:01:43 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1681444903292 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:02 " "Elapsed time: 00:00:02" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1681444903292 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1681444903292 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1681444903292 ""}

BIN
cpld/db/GR8RAM.sta.rdb
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.sta_cmp.5_slow.tdb
View File

Binary file not shown.

BIN
cpld/db/GR8RAM.vpr.ammdb
View File

Binary file not shown.

106
cpld/db/prev_cmp_GR8RAM.qmsg
View File

@ -1,11 +1,95 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1679994334673 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition " "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1679994334673 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Mar 28 05:05:34 2023 " "Processing started: Tue Mar 28 05:05:34 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1679994334673 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1679994334673 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off GR8RAM -c GR8RAM " "Command: quartus_map --read_settings_files=on --write_settings_files=off GR8RAM -c GR8RAM" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1679994334673 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1679994335048 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1679994335048 ""}
{ "Warning" "WVRFX_L3_VERI_XZ_EXTEND_SIGNIFICANT" "GR8RAM.v(103) " "Verilog HDL warning at GR8RAM.v(103): extended using \"x\" or \"z\"" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 103 0 0 } } } 0 10273 "Verilog HDL warning at %1!s!: extended using \"x\" or \"z\"" 1 0 "Analysis & Synthesis" 0 -1 1679994351125 ""}
{ "Warning" "WVRFX_L3_VERI_XZ_EXTEND_SIGNIFICANT" "GR8RAM.v(280) " "Verilog HDL warning at GR8RAM.v(280): extended using \"x\" or \"z\"" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 280 0 0 } } } 0 10273 "Verilog HDL warning at %1!s!: extended using \"x\" or \"z\"" 1 0 "Analysis & Synthesis" 0 -1 1679994351125 ""}
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "gr8ram.v 1 1 " "Found 1 design units, including 1 entities, in source file gr8ram.v" { { "Info" "ISGN_ENTITY_NAME" "1 GR8RAM " "Found entity 1: GR8RAM" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1679994351125 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1679994351125 ""}
{ "Error" "EVRFX_VERI_UNDECLARED_OBJECT" "SetFW GR8RAM.v(1) " "Verilog HDL error at GR8RAM.v(1): object \"SetFW\" is not declared. Verify the object name is correct. If the name is correct, declare the object." { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 1 0 0 } } } 0 10161 "Verilog HDL error at %2!s!: object \"%1!s!\" is not declared. Verify the object name is correct. If the name is correct, declare the object." 0 0 "Analysis & Synthesis" 0 -1 1679994351125 ""}
{ "Error" "EQEXE_ERROR_COUNT" "Analysis & Synthesis 1 1 Quartus Prime " "Quartus Prime Analysis & Synthesis was unsuccessful. 1 error, 1 warning" { { "Error" "EQEXE_END_PEAK_VSIZE_MEMORY" "13076 " "Peak virtual memory: 13076 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1679994351157 ""} { "Error" "EQEXE_END_BANNER_TIME" "Tue Mar 28 05:05:51 2023 " "Processing ended: Tue Mar 28 05:05:51 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1679994351157 ""} { "Error" "EQEXE_ELAPSED_TIME" "00:00:17 " "Elapsed time: 00:00:17" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1679994351157 ""} { "Error" "EQEXE_ELAPSED_CPU_TIME" "00:00:39 " "Total CPU time (on all processors): 00:00:39" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1679994351157 ""} } { } 0 0 "%6!s! %1!s! was unsuccessful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1679994351157 ""}
{ "Error" "EFLOW_ERROR_COUNT" "Full Compilation 3 s 1 " "Quartus Prime Full Compilation was unsuccessful. 3 errors, 1 warning" { } { } 0 293001 "Quartus Prime %1!s! was unsuccessful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1679994351875 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1681444781029 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition " "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1681444781029 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Apr 13 23:59:40 2023 " "Processing started: Thu Apr 13 23:59:40 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1681444781029 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1681444781029 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off GR8RAM -c GR8RAM " "Command: quartus_map --read_settings_files=on --write_settings_files=off GR8RAM -c GR8RAM" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1681444781029 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1681444781402 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1681444781402 ""}
{ "Warning" "WVRFX_L3_VERI_XZ_EXTEND_SIGNIFICANT" "GR8RAM.v(85) " "Verilog HDL warning at GR8RAM.v(85): extended using \"x\" or \"z\"" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 85 0 0 } } } 0 10273 "Verilog HDL warning at %1!s!: extended using \"x\" or \"z\"" 1 0 "Analysis & Synthesis" 0 -1 1681444798192 ""}
{ "Warning" "WVRFX_L3_VERI_XZ_EXTEND_SIGNIFICANT" "GR8RAM.v(261) " "Verilog HDL warning at GR8RAM.v(261): extended using \"x\" or \"z\"" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 261 0 0 } } } 0 10273 "Verilog HDL warning at %1!s!: extended using \"x\" or \"z\"" 1 0 "Analysis & Synthesis" 0 -1 1681444798192 ""}
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "gr8ram.v 1 1 " "Found 1 design units, including 1 entities, in source file gr8ram.v" { { "Info" "ISGN_ENTITY_NAME" "1 GR8RAM " "Found entity 1: GR8RAM" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1681444798192 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1681444798192 ""}
{ "Info" "ISGN_START_ELABORATION_TOP" "GR8RAM " "Elaborating entity \"GR8RAM\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1681444798239 ""}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 4 GR8RAM.v(31) " "Verilog HDL assignment warning at GR8RAM.v(31): truncated value with size 32 to match size of target (4)" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 31 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1681444798254 "|GR8RAM"}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 14 GR8RAM.v(36) " "Verilog HDL assignment warning at GR8RAM.v(36): truncated value with size 32 to match size of target (14)" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 36 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1681444798254 "|GR8RAM"}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 8 GR8RAM.v(109) " "Verilog HDL assignment warning at GR8RAM.v(109): truncated value with size 32 to match size of target (8)" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 109 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1681444798254 "|GR8RAM"}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 8 GR8RAM.v(117) " "Verilog HDL assignment warning at GR8RAM.v(117): truncated value with size 32 to match size of target (8)" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 117 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1681444798270 "|GR8RAM"}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 8 GR8RAM.v(124) " "Verilog HDL assignment warning at GR8RAM.v(124): truncated value with size 32 to match size of target (8)" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 124 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1681444798270 "|GR8RAM"}
{ "Info" "ISCL_SCL_WYSIWYG_RESYNTHESIS" "0 area 0 " "Resynthesizing 0 WYSIWYG logic cells and I/Os using \"area\" technology mapper which leaves 0 WYSIWYG logic cells and I/Os untouched" { } { } 0 17026 "Resynthesizing %1!d! WYSIWYG logic cells and I/Os using \"%2!s!\" technology mapper which leaves %3!d! WYSIWYG logic cells and I/Os untouched" 0 0 "Analysis & Synthesis" 0 -1 1681444798739 ""}
{ "Warning" "WMLS_MLS_STUCK_PIN_HDR" "" "Output pins are stuck at VCC or GND" { { "Warning" "WMLS_MLS_STUCK_PIN" "nNMIout VCC " "Pin \"nNMIout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 541 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1681444798911 "|GR8RAM|nNMIout"} { "Warning" "WMLS_MLS_STUCK_PIN" "nIRQout VCC " "Pin \"nIRQout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 544 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1681444798911 "|GR8RAM|nIRQout"} { "Warning" "WMLS_MLS_STUCK_PIN" "nRDYout VCC " "Pin \"nRDYout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 543 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1681444798911 "|GR8RAM|nRDYout"} { "Warning" "WMLS_MLS_STUCK_PIN" "nINHout VCC " "Pin \"nINHout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 542 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1681444798911 "|GR8RAM|nINHout"} { "Warning" "WMLS_MLS_STUCK_PIN" "RWout VCC " "Pin \"RWout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 545 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1681444798911 "|GR8RAM|RWout"} { "Warning" "WMLS_MLS_STUCK_PIN" "nDMAout VCC " "Pin \"nDMAout\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 540 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1681444798911 "|GR8RAM|nDMAout"} { "Warning" "WMLS_MLS_STUCK_PIN" "RAdir VCC " "Pin \"RAdir\" is stuck at VCC" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 539 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1681444798911 "|GR8RAM|RAdir"} } { } 0 13024 "Output pins are stuck at VCC or GND" 0 0 "Analysis & Synthesis" 0 -1 1681444798911 ""}
{ "Info" "ISCL_SCL_LOST_FANOUT_MSG_HDR" "1 " "1 registers lost all their fanouts during netlist optimizations." { } { } 0 17049 "%1!d! registers lost all their fanouts during netlist optimizations." 0 0 "Analysis & Synthesis" 0 -1 1681444799194 ""}
{ "Info" "ICUT_CUT_TM_SUMMARY" "305 " "Implemented 305 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "28 " "Implemented 28 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1681444799208 ""} { "Info" "ICUT_CUT_TM_OPINS" "35 " "Implemented 35 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1681444799208 ""} { "Info" "ICUT_CUT_TM_BIDIRS" "17 " "Implemented 17 bidirectional pins" { } { } 0 21060 "Implemented %1!d! bidirectional pins" 0 0 "Design Software" 0 -1 1681444799208 ""} { "Info" "ICUT_CUT_TM_LCELLS" "225 " "Implemented 225 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1681444799208 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1681444799208 ""}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.map.smsg " "Generated suppressed messages file Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.map.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1681444799270 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 14 s Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 14 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "13091 " "Peak virtual memory: 13091 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1681444799301 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Apr 13 23:59:59 2023 " "Processing ended: Thu Apr 13 23:59:59 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1681444799301 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:19 " "Elapsed time: 00:00:19" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1681444799301 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:43 " "Total CPU time (on all processors): 00:00:43" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1681444799301 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1681444799301 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Analysis & Synthesis" 0 -1 1681444800872 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus Prime " "Running Quartus Prime Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition " "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1681444800888 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Apr 14 00:00:00 2023 " "Processing started: Fri Apr 14 00:00:00 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1681444800888 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Fitter" 0 -1 1681444800888 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off GR8RAM -c GR8RAM " "Command: quartus_fit --read_settings_files=off --write_settings_files=off GR8RAM -c GR8RAM" { } { } 0 0 "Command: %1!s!" 0 0 "Fitter" 0 -1 1681444800888 ""}
{ "Info" "0" "" "qfit2_default_script.tcl version: #1" { } { } 0 0 "qfit2_default_script.tcl version: #1" 0 0 "Fitter" 0 0 1681444800982 ""}
{ "Info" "0" "" "Project = GR8RAM" { } { } 0 0 "Project = GR8RAM" 0 0 "Fitter" 0 0 1681444800982 ""}
{ "Info" "0" "" "Revision = GR8RAM" { } { } 0 0 "Revision = GR8RAM" 0 0 "Fitter" 0 0 1681444800982 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1681444801107 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1681444801107 ""}
{ "Info" "IMPP_MPP_USER_DEVICE" "GR8RAM EPM240T100C5 " "Selected device EPM240T100C5 for design \"GR8RAM\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1681444801107 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1681444801153 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1681444801169 ""}
{ "Info" "IFITCC_FITCC_INFO_STANDARD_FIT_COMPILATION_ON" "" "Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" { } { } 0 171004 "Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" 0 0 "Fitter" 0 -1 1681444801263 ""}
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1681444801278 ""}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM240T100I5 " "Device EPM240T100I5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1681444801528 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM240T100A5 " "Device EPM240T100A5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1681444801528 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100C5 " "Device EPM570T100C5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1681444801528 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100I5 " "Device EPM570T100I5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1681444801528 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100A5 " "Device EPM570T100A5 is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1681444801528 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1681444801528 ""}
{ "Info" "ISTA_SDC_FOUND" "GR8RAM.sdc " "Reading SDC File: 'GR8RAM.sdc'" { } { } 0 332104 "Reading SDC File: '%1!s!'" 0 0 "Fitter" 0 -1 1681444801716 ""}
{ "Info" "ISTA_USER_TDC_OPTIMIZATION_GOALS" "" "Detected timing requirements -- optimizing circuit to achieve only the specified requirements" { } { } 0 332129 "Detected timing requirements -- optimizing circuit to achieve only the specified requirements" 0 0 "Fitter" 0 -1 1681444801747 ""}
{ "Info" "ISTA_REPORT_CLOCKS_INFO" "Found 2 clocks " "Found 2 clocks" { { "Info" "ISTA_REPORT_CLOCKS_INFO" " Period Clock Name " " Period Clock Name" { } { } 0 332111 "%1!s!" 0 0 "Design Software" 0 -1 1681444801747 ""} { "Info" "ISTA_REPORT_CLOCKS_INFO" "======== ============ " "======== ============" { } { } 0 332111 "%1!s!" 0 0 "Design Software" 0 -1 1681444801747 ""} { "Info" "ISTA_REPORT_CLOCKS_INFO" " 40.000 C25M " " 40.000 C25M" { } { } 0 332111 "%1!s!" 0 0 "Design Software" 0 -1 1681444801747 ""} { "Info" "ISTA_REPORT_CLOCKS_INFO" " 978.000 PHI0 " " 978.000 PHI0" { } { } 0 332111 "%1!s!" 0 0 "Design Software" 0 -1 1681444801747 ""} } { } 0 332111 "%1!s!" 0 0 "Fitter" 0 -1 1681444801747 ""}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1681444801747 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1681444801747 ""}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "User Assigned Global Signals Promotion Operation " "Completed User Assigned Global Signals Promotion Operation" { } { } 0 186079 "Completed %1!s!" 0 0 "Fitter" 0 -1 1681444801747 ""}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "C25M Global clock in PIN 64 " "Automatically promoted signal \"C25M\" to use Global clock in PIN 64" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 9 -1 0 } } } 0 186215 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0 "Fitter" 0 -1 1681444801779 ""}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL" "nRESr Global clock " "Automatically promoted some destinations of signal \"nRESr\" to use Global clock" { { "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_SOME_TO_GLOBAL_SUB" "IOROMEN " "Destination \"IOROMEN\" may be non-global or may not use global clock" { } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 69 -1 0 } } } 0 186217 "Destination \"%1!s!\" may be non-global or may not use global clock" 0 0 "Design Software" 0 -1 1681444801779 ""} } { { "GR8RAM.v" "" { Text "Y:/Repos/GR8RAM/cpld/GR8RAM.v" 14 -1 0 } } } 0 186216 "Automatically promoted some destinations of signal \"%1!s!\" to use %2!s!" 0 0 "Fitter" 0 -1 1681444801779 ""}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Global Promotion Operation " "Completed Auto Global Promotion Operation" { } { } 0 186079 "Completed %1!s!" 0 0 "Fitter" 0 -1 1681444801779 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_FYGR_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176234 "Starting register packing" 0 0 "Fitter" 0 -1 1681444801779 ""}
{ "Extra Info" "IFSAC_FSAC_START_LUT_PACKING" "" "Moving registers into LUTs to improve timing and density" { } { } 1 176244 "Moving registers into LUTs to improve timing and density" 1 0 "Fitter" 0 -1 1681444801810 ""}
{ "Info" "IFYGR_FYGR_NO_REGS_IN_IOS_HEADER" "" "Started processing fast register assignments" { } { } 0 186468 "Started processing fast register assignments" 0 0 "Fitter" 0 -1 1681444801857 ""}
{ "Info" "IFYGR_FYGR_NO_REGS_IN_IOS_FOOTER" "" "Finished processing fast register assignments" { } { } 0 186469 "Finished processing fast register assignments" 0 0 "Fitter" 0 -1 1681444801857 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_LUT_PACKING" "00:00:00 " "Finished moving registers into LUTs: elapsed time is 00:00:00" { } { } 1 176245 "Finished moving registers into LUTs: elapsed time is %1!s!" 1 0 "Fitter" 0 -1 1681444801857 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1681444801857 ""}
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Fitter preparation operations ending: elapsed time is 00:00:00" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1681444801919 ""}
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1681444801919 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1681444802060 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1681444802294 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1681444802310 ""}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1681444803044 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:01 " "Fitter placement operations ending: elapsed time is 00:00:01" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1681444803044 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1681444803092 ""}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "32 " "Router estimated average interconnect usage is 32% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "32 X0_Y0 X8_Y5 " "Router estimated peak interconnect usage is 32% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5" { } { { "loc" "" { Generic "Y:/Repos/GR8RAM/cpld/" { { 1 { 0 "Router estimated peak interconnect usage is 32% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5"} { { 12 { 0 ""} 0 0 9 6 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1681444803327 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1681444803327 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1681444803607 ""}
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.32 " "Total time spent on timing analysis during the Fitter is 0.32 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1681444803622 ""}
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:00 " "Fitter post-fit operations ending: elapsed time is 00:00:00" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1681444803638 ""}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." { } { } 0 169174 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0 "Fitter" 0 -1 1681444803685 ""}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.fit.smsg " "Generated suppressed messages file Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1681444803732 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 3 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 3 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "13735 " "Peak virtual memory: 13735 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1681444803779 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Apr 14 00:00:03 2023 " "Processing ended: Fri Apr 14 00:00:03 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1681444803779 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:03 " "Elapsed time: 00:00:03" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1681444803779 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:05 " "Total CPU time (on all processors): 00:00:05" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1681444803779 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1681444803779 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Fitter" 0 -1 1681444805211 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition " "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1681444805211 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Apr 14 00:00:05 2023 " "Processing started: Fri Apr 14 00:00:05 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1681444805211 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1681444805211 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off GR8RAM -c GR8RAM " "Command: quartus_asm --read_settings_files=off --write_settings_files=off GR8RAM -c GR8RAM" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1681444805211 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1681444805477 ""}
{ "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1681444805508 ""}
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1681444805524 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "13055 " "Peak virtual memory: 13055 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1681444805748 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Apr 14 00:00:05 2023 " "Processing ended: Fri Apr 14 00:00:05 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1681444805748 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1681444805748 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1681444805748 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1681444805748 ""}
{ "Info" "IFLOW_DISABLED_MODULE" "Power Analyzer FLOW_ENABLE_POWER_ANALYZER " "Skipped module Power Analyzer due to the assignment FLOW_ENABLE_POWER_ANALYZER" { } { } 0 293026 "Skipped module %1!s! due to the assignment %2!s!" 0 0 "Assembler" 0 -1 1681444806469 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Assembler" 0 -1 1681444807407 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition " "Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1681444807407 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Apr 14 00:00:07 2023 " "Processing started: Fri Apr 14 00:00:07 2023" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1681444807407 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1681444807407 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta GR8RAM -c GR8RAM " "Command: quartus_sta GR8RAM -c GR8RAM" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1681444807407 ""}
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1681444807517 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1681444807689 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "4 4 " "Parallel compilation is enabled and will use 4 of the 4 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1681444807689 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1681444807735 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1681444807735 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1681444807802 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1681444808204 ""}
{ "Info" "ISTA_SDC_FOUND" "GR8RAM.sdc " "Reading SDC File: 'GR8RAM.sdc'" { } { } 0 332104 "Reading SDC File: '%1!s!'" 0 0 "Timing Analyzer" 0 -1 1681444808267 ""}
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1681444808282 ""}
{ "Info" "0" "" "Can't run Report Timing Closure Recommendations. The current device family is not supported." { } { } 0 0 "Can't run Report Timing Closure Recommendations. The current device family is not supported." 0 0 "Timing Analyzer" 0 0 1681444808314 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "setup 14.271 " "Worst-case setup slack is 14.271" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808314 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808314 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 14.271 0.000 C25M " " 14.271 0.000 C25M " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808314 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1681444808314 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 1.385 " "Worst-case hold slack is 1.385" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808329 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808329 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 1.385 0.000 C25M " " 1.385 0.000 C25M " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808329 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1681444808329 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "recovery 32.601 " "Worst-case recovery slack is 32.601" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808329 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808329 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 32.601 0.000 C25M " " 32.601 0.000 C25M " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808329 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1681444808329 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "removal 6.845 " "Worst-case removal slack is 6.845" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808329 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808329 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 6.845 0.000 C25M " " 6.845 0.000 C25M " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808329 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1681444808329 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width 19.734 " "Worst-case minimum pulse width slack is 19.734" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808329 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808329 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 19.734 0.000 C25M " " 19.734 0.000 C25M " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808329 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 488.734 0.000 PHI0 " " 488.734 0.000 PHI0 " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1681444808329 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1681444808329 ""}
{ "Info" "ISTA_METASTABILITY_REPORT_DISABLED" "" "The selected device family is not supported by the report_metastability command." { } { } 0 332001 "The selected device family is not supported by the report_metastability command." 0 0 "Timing Analyzer" 0 -1 1681444808376 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1681444808407 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1681444808407 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 1 Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "13053 " "Peak virtual memory: 13053 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1681444808471 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Apr 14 00:00:08 2023 " "Processing ended: Fri Apr 14 00:00:08 2023" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1681444808471 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1681444808471 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1681444808471 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1681444808471 ""}
{ "Info" "IFLOW_ERROR_COUNT" "Full Compilation 0 s 19 s " "Quartus Prime Full Compilation was successful. 0 errors, 19 warnings" { } { } 0 293000 "Quartus Prime %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1681444809260 ""}

BIN
cpld/incremental_db/compiled_partitions/GR8RAM.root_partition.map.kpt
View File

Binary file not shown.

14
cpld/output_files/GR8RAM.asm.rpt
View File

@ -1,5 +1,5 @@
Assembler report for GR8RAM
Tue Mar 28 05:06:37 2023
Fri Apr 14 00:01:40 2023
Quartus Prime Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition
@ -38,7 +38,7 @@ https://fpgasoftware.intel.com/eula.
+---------------------------------------------------------------+
; Assembler Summary ;
+-----------------------+---------------------------------------+
; Assembler Status ; Successful - Tue Mar 28 05:06:37 2023 ;
; Assembler Status ; Successful - Fri Apr 14 00:01:40 2023 ;
; Revision Name ; GR8RAM ;
; Top-level Entity Name ; GR8RAM ;
; Family ; MAX II ;
@ -67,8 +67,8 @@ https://fpgasoftware.intel.com/eula.
+----------------+-------------------------------------------------------+
; Option ; Setting ;
+----------------+-------------------------------------------------------+
; JTAG usercode ; 0x001615F8 ;
; Checksum ; 0x001618F8 ;
; JTAG usercode ; 0x00166C15 ;
; Checksum ; 0x00167085 ;
+----------------+-------------------------------------------------------+
@ -78,14 +78,14 @@ https://fpgasoftware.intel.com/eula.
Info: *******************************************************************
Info: Running Quartus Prime Assembler
Info: Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition
Info: Processing started: Tue Mar 28 05:06:36 2023
Info: Processing started: Fri Apr 14 00:01:39 2023
Info: Command: quartus_asm --read_settings_files=off --write_settings_files=off GR8RAM -c GR8RAM
Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance.
Info (115031): Writing out detailed assembly data for power analysis
Info (115030): Assembler is generating device programming files
Info: Quartus Prime Assembler was successful. 0 errors, 1 warning
Info: Peak virtual memory: 13057 megabytes
Info: Processing ended: Tue Mar 28 05:06:37 2023
Info: Peak virtual memory: 13056 megabytes
Info: Processing ended: Fri Apr 14 00:01:40 2023
Info: Elapsed time: 00:00:01
Info: Total CPU time (on all processors): 00:00:01

2
cpld/output_files/GR8RAM.done
View File

@ -1 +1 @@
Tue Mar 28 05:06:40 2023
Fri Apr 14 00:01:44 2023

303
cpld/output_files/GR8RAM.fit.rpt
View File

@ -1,5 +1,5 @@
Fitter report for GR8RAM
Tue Mar 28 05:06:35 2023
Fri Apr 14 00:01:38 2023
Quartus Prime Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition
@ -57,14 +57,14 @@ https://fpgasoftware.intel.com/eula.
+---------------------------------------------------------------------+
; Fitter Summary ;
+-----------------------+---------------------------------------------+
; Fitter Status ; Successful - Tue Mar 28 05:06:35 2023 ;
; Fitter Status ; Successful - Fri Apr 14 00:01:38 2023 ;
; Quartus Prime Version ; 19.1.0 Build 670 09/22/2019 SJ Lite Edition ;
; Revision Name ; GR8RAM ;
; Top-level Entity Name ; GR8RAM ;
; Family ; MAX II ;
; Device ; EPM240T100C5 ;
; Timing Models ; Final ;
; Total logic elements ; 236 / 240 ( 98 % ) ;
; Total logic elements ; 220 / 240 ( 92 % ) ;
; Total pins ; 80 / 80 ( 100 % ) ;
; Total virtual pins ; 0 ;
; UFM blocks ; 0 / 1 ( 0 % ) ;
@ -129,13 +129,13 @@ https://fpgasoftware.intel.com/eula.
; Number detected on machine ; 4 ;
; Maximum allowed ; 4 ;
; ; ;
; Average used ; 1.04 ;
; Average used ; 1.03 ;
; Maximum used ; 4 ;
; ; ;
; Usage by Processor ; % Time Used ;
; Processor 1 ; 100.0% ;
; Processor 2 ; 1.6% ;
; Processors 3-4 ; 1.2% ;
; Processor 2 ; 1.2% ;
; Processors 3-4 ; 1.0% ;
+----------------------------+-------------+
@ -150,28 +150,28 @@ The pin-out file can be found in Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.pin.
+---------------------------------------------+-----------------------+
; Resource ; Usage ;
+---------------------------------------------+-----------------------+
; Total logic elements ; 236 / 240 ( 98 % ) ;
; -- Combinational with no register ; 119 ;
; Total logic elements ; 220 / 240 ( 92 % ) ;
; -- Combinational with no register ; 120 ;
; -- Register only ; 1 ;
; -- Combinational with a register ; 116 ;
; -- Combinational with a register ; 99 ;
; ; ;
; Logic element usage by number of LUT inputs ; ;
; -- 4 input functions ; 137 ;
; -- 3 input functions ; 35 ;
; -- 2 input functions ; 63 ;
; -- 1 input functions ; 0 ;
; -- 4 input functions ; 120 ;
; -- 3 input functions ; 32 ;
; -- 2 input functions ; 66 ;
; -- 1 input functions ; 1 ;
; -- 0 input functions ; 0 ;
; ; ;
; Logic elements by mode ; ;
; -- normal mode ; 203 ;
; -- normal mode ; 187 ;
; -- arithmetic mode ; 33 ;
; -- qfbk mode ; 15 ;
; -- qfbk mode ; 3 ;
; -- register cascade mode ; 0 ;
; -- synchronous clear/load mode ; 64 ;
; -- asynchronous clear/load mode ; 29 ;
; -- synchronous clear/load mode ; 49 ;
; -- asynchronous clear/load mode ; 30 ;
; ; ;
; Total registers ; 117 / 240 ( 49 % ) ;
; Total LABs ; 24 / 24 ( 100 % ) ;
; Total registers ; 100 / 240 ( 42 % ) ;
; Total LABs ; 23 / 24 ( 96 % ) ;
; Logic elements in carry chains ; 37 ;
; Virtual pins ; 0 ;
; I/O pins ; 80 / 80 ( 100 % ) ;
@ -182,15 +182,15 @@ The pin-out file can be found in Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.pin.
; -- Total Fixed Point DSP Blocks ; 0 ;
; -- Total Floating Point DSP Blocks ; 0 ;
; ; ;
; Global signals ; 3 ;
; -- Global clocks ; 3 / 4 ( 75 % ) ;
; Global signals ; 2 ;
; -- Global clocks ; 2 / 4 ( 50 % ) ;
; JTAGs ; 0 / 1 ( 0 % ) ;
; Average interconnect usage (total/H/V) ; 38.7% / 42.5% / 34.6% ;
; Peak interconnect usage (total/H/V) ; 38.7% / 42.5% / 34.6% ;
; Maximum fan-out ; 103 ;
; Highest non-global fan-out ; 53 ;
; Total fan-out ; 1101 ;
; Average fan-out ; 3.48 ;
; Average interconnect usage (total/H/V) ; 37.0% / 38.2% / 35.8% ;
; Peak interconnect usage (total/H/V) ; 37.0% / 38.2% / 35.8% ;
; Maximum fan-out ; 99 ;
; Highest non-global fan-out ; 43 ;
; Total fan-out ; 1019 ;
; Average fan-out ; 3.40 ;
+---------------------------------------------+-----------------------+
@ -199,34 +199,34 @@ The pin-out file can be found in Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.pin.
+----------+-------+----------+--------------+--------------+-------------+-----------------------+--------------------+--------+-----------------+----------+--------------+----------------------------+----------------------+----------------+
; Name ; Pin # ; I/O Bank ; X coordinate ; Y coordinate ; Cell number ; Combinational Fan-Out ; Registered Fan-Out ; Global ; PCI I/O Enabled ; Bus Hold ; Weak Pull Up ; I/O Standard ; Location assigned by ; Slow Slew Rate ;
+----------+-------+----------+--------------+--------------+-------------+-----------------------+--------------------+--------+-----------------+----------+--------------+----------------------------+----------------------+----------------+
; C25M ; 64 ; 2 ; 8 ; 3 ; 4 ; 103 ; 0 ; yes ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; C25M ; 64 ; 2 ; 8 ; 3 ; 4 ; 99 ; 0 ; yes ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; DMAin ; 48 ; 1 ; 6 ; 0 ; 0 ; 1 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; INTin ; 49 ; 1 ; 7 ; 0 ; 2 ; 1 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; MISO ; 16 ; 1 ; 1 ; 2 ; 2 ; 2 ; 0 ; no ; no ; yes ; Off ; 3.3-V LVTTL ; User ; no ;
; PHI0 ; 41 ; 1 ; 5 ; 0 ; 1 ; 15 ; 0 ; yes ; no ; no ; Off ; 3.3V Schmitt Trigger Input ; User ; no ;
; RA[0] ; 100 ; 2 ; 2 ; 5 ; 2 ; 2 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; MISO ; 16 ; 1 ; 1 ; 2 ; 2 ; 1 ; 0 ; no ; no ; yes ; Off ; 3.3-V LVTTL ; User ; no ;
; PHI0 ; 41 ; 1 ; 5 ; 0 ; 1 ; 3 ; 0 ; no ; no ; no ; Off ; 3.3V Schmitt Trigger Input ; User ; no ;
; RA[0] ; 100 ; 2 ; 2 ; 5 ; 2 ; 9 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[10] ; 14 ; 1 ; 1 ; 2 ; 0 ; 2 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[11] ; 34 ; 1 ; 3 ; 0 ; 1 ; 1 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[12] ; 35 ; 1 ; 3 ; 0 ; 0 ; 1 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[13] ; 36 ; 1 ; 4 ; 0 ; 2 ; 1 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[14] ; 37 ; 1 ; 4 ; 0 ; 1 ; 1 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[15] ; 38 ; 1 ; 4 ; 0 ; 0 ; 1 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[1] ; 98 ; 2 ; 2 ; 5 ; 0 ; 2 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[2] ; 97 ; 2 ; 3 ; 5 ; 3 ; 2 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[3] ; 4 ; 1 ; 1 ; 4 ; 2 ; 2 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[1] ; 98 ; 2 ; 2 ; 5 ; 0 ; 8 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[2] ; 97 ; 2 ; 3 ; 5 ; 3 ; 5 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[3] ; 4 ; 1 ; 1 ; 4 ; 2 ; 5 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[4] ; 1 ; 2 ; 2 ; 5 ; 3 ; 2 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[5] ; 2 ; 1 ; 1 ; 4 ; 0 ; 2 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[6] ; 3 ; 1 ; 1 ; 4 ; 1 ; 2 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[7] ; 6 ; 1 ; 1 ; 3 ; 0 ; 2 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[8] ; 7 ; 1 ; 1 ; 3 ; 1 ; 2 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; RA[9] ; 8 ; 1 ; 1 ; 3 ; 2 ; 2 ; 0 ; no ; no ; no ; Off ; 3.3-V LVTTL ; User ; no ;
; SetFW[0] ; 96 ; 2 ; 3 ; 5 ; 2 ; 0 ; 0 ; no ; no ; no ; On ; 3.3V Schmitt Trigger Input ; User ; no ;
; SetFW[1] ; 95 ; 2 ; 3 ; 5 ; 1 ; 0 ; 0 ; no ; no ; no ; On ; 3.3V Schmitt Trigger Input ; User ; no ;
; SetFW[0] ; 96 ; 2 ; 3 ; 5 ; 2 ; 1 ; 0 ; no ; no ; no ; On ; 3.3V Schmitt Trigger Input ; User ; no ;
; SetFW[1] ; 95 ; 2 ; 3 ; 5 ; 1 ; 8 ; 0 ; no ; no ; no ; On ; 3.3V Schmitt Trigger Input ; User ; no ;
; nDEVSEL ; 40 ; 1 ; 5 ; 0 ; 2 ; 5 ; 0 ; no ; no ; no ; Off ; 3.3V Schmitt Trigger Input ; User ; no ;
; nIOSEL ; 39 ; 1 ; 5 ; 0 ; 3 ; 4 ; 0 ; no ; no ; no ; Off ; 3.3V Schmitt Trigger Input ; User ; no ;
; nIOSTRB ; 42 ; 1 ; 5 ; 0 ; 0 ; 3 ; 0 ; no ; no ; no ; Off ; 3.3V Schmitt Trigger Input ; User ; no ;
; nIOSEL ; 39 ; 1 ; 5 ; 0 ; 3 ; 12 ; 0 ; no ; no ; no ; Off ; 3.3V Schmitt Trigger Input ; User ; no ;
; nIOSTRB ; 42 ; 1 ; 5 ; 0 ; 0 ; 11 ; 0 ; no ; no ; no ; Off ; 3.3V Schmitt Trigger Input ; User ; no ;
; nRES ; 44 ; 1 ; 6 ; 0 ; 2 ; 1 ; 0 ; no ; no ; no ; Off ; 3.3V Schmitt Trigger Input ; User ; no ;
; nWE ; 43 ; 1 ; 6 ; 0 ; 3 ; 2 ; 0 ; no ; no ; no ; Off ; 3.3V Schmitt Trigger Input ; User ; no ;
; nWE ; 43 ; 1 ; 6 ; 0 ; 3 ; 3 ; 0 ; no ; no ; no ; Off ; 3.3V Schmitt Trigger Input ; User ; no ;
+----------+-------+----------+--------------+--------------+-------------+-----------------------+--------------------+--------+-----------------+----------+--------------+----------------------------+----------------------+----------------+
@ -238,7 +238,7 @@ The pin-out file can be found in Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.pin.
; DMAout ; 18 ; 1 ; 1 ; 1 ; 0 ; no ; no ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; no ; User ; 10 pF ; - ; - ;
; DQMH ; 57 ; 2 ; 8 ; 2 ; 3 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; DQML ; 85 ; 2 ; 5 ; 5 ; 0 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; FCK ; 12 ; 1 ; 1 ; 3 ; 3 ; no ; yes ; no ; no ; no ; yes ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; FCK ; 12 ; 1 ; 1 ; 3 ; 3 ; no ; yes ; no ; no ; yes ; yes ; Off ; 3.3-V LVTTL ; 8mA ; yes ; User ; 10 pF ; - ; - ;
; INTout ; 20 ; 1 ; 1 ; 1 ; 2 ; no ; no ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; no ; User ; 10 pF ; - ; - ;
; RAdir ; 19 ; 1 ; 1 ; 1 ; 1 ; no ; yes ; no ; no ; no ; no ; On ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; RCKE ; 66 ; 2 ; 8 ; 3 ; 3 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
@ -252,7 +252,7 @@ The pin-out file can be found in Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.pin.
; SA[2] ; 82 ; 2 ; 6 ; 5 ; 1 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; SA[3] ; 84 ; 2 ; 6 ; 5 ; 3 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; SA[4] ; 76 ; 2 ; 7 ; 5 ; 1 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; SA[5] ; 83 ; 2 ; 6 ; 5 ; 2 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; yes ; User ; 10 pF ; - ; - ;
; SA[5] ; 83 ; 2 ; 6 ; 5 ; 2 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; SA[6] ; 77 ; 2 ; 7 ; 5 ; 2 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; SA[7] ; 78 ; 2 ; 7 ; 5 ; 3 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; SA[8] ; 74 ; 2 ; 8 ; 4 ; 0 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
@ -261,14 +261,14 @@ The pin-out file can be found in Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.pin.
; SBA[1] ; 71 ; 2 ; 8 ; 4 ; 3 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; nCAS ; 61 ; 2 ; 8 ; 2 ; 1 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; nDMAout ; 21 ; 1 ; 1 ; 1 ; 3 ; no ; no ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; no ; User ; 10 pF ; - ; - ;
; nFCS ; 5 ; 1 ; 1 ; 4 ; 3 ; no ; yes ; no ; no ; no ; no ; On ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; nFCS ; 5 ; 1 ; 1 ; 4 ; 3 ; no ; yes ; no ; no ; yes ; no ; On ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; nINHout ; 27 ; 1 ; 2 ; 0 ; 2 ; no ; no ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; no ; User ; 10 pF ; - ; - ;
; nIRQout ; 29 ; 1 ; 2 ; 0 ; 0 ; no ; no ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; no ; User ; 10 pF ; - ; - ;
; nNMIout ; 26 ; 1 ; 2 ; 0 ; 3 ; no ; no ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; no ; User ; 10 pF ; - ; - ;
; nRAS ; 62 ; 2 ; 8 ; 2 ; 0 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; yes ; User ; 10 pF ; - ; - ;
; nRAS ; 62 ; 2 ; 8 ; 2 ; 0 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; nRCS ; 67 ; 2 ; 8 ; 3 ; 2 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; nRDYout ; 28 ; 1 ; 2 ; 0 ; 1 ; no ; no ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; no ; User ; 10 pF ; - ; - ;
; nRESout ; 30 ; 1 ; 3 ; 0 ; 3 ; no ; yes ; no ; no ; no ; no ; On ; 3.3-V LVTTL ; 8mA ; yes ; User ; 10 pF ; - ; - ;
; nRESout ; 30 ; 1 ; 3 ; 0 ; 3 ; no ; yes ; no ; no ; no ; no ; On ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
; nSWE ; 58 ; 2 ; 8 ; 2 ; 2 ; no ; yes ; no ; no ; no ; no ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; - ; - ;
+---------+-------+----------+--------------+--------------+-------------+-----------------+----------------+-----------------+------------+---------------+----------+--------------+--------------+------------------+------------------------+----------------------+-------+----------------------+---------------------+
@ -279,22 +279,22 @@ The pin-out file can be found in Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.pin.
; Name ; Pin # ; I/O Bank ; X coordinate ; Y coordinate ; Cell number ; Combinational Fan-Out ; Registered Fan-Out ; Global ; Output Register ; Slow Slew Rate ; PCI I/O Enabled ; Open Drain ; Bus Hold ; Weak Pull Up ; I/O Standard ; Current Strength ; Fast Output Connection ; Location assigned by ; Load ; Output Enable Source ; Output Enable Group ;
+-------+-------+----------+--------------+--------------+-------------+-----------------------+--------------------+--------+-----------------+----------------+-----------------+------------+----------+--------------+--------------+------------------+------------------------+----------------------+-------+----------------------+---------------------+
; MOSI ; 15 ; 1 ; 1 ; 2 ; 1 ; 1 ; 0 ; no ; no ; yes ; no ; no ; yes ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; MOSIOE ; - ;
; RD[0] ; 86 ; 2 ; 5 ; 5 ; 1 ; 6 ; 0 ; no ; no ; no ; no ; no ; yes ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; comb~2 ; - ;
; RD[1] ; 87 ; 2 ; 5 ; 5 ; 2 ; 5 ; 0 ; no ; no ; no ; no ; no ; yes ; Off ; 3.3-V LVTTL ; 8mA ; yes ; User ; 10 pF ; comb~2 ; - ;
; RD[0] ; 86 ; 2 ; 5 ; 5 ; 1 ; 5 ; 0 ; no ; no ; no ; no ; no ; yes ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; comb~2 ; - ;
; RD[1] ; 87 ; 2 ; 5 ; 5 ; 2 ; 4 ; 0 ; no ; no ; no ; no ; no ; yes ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; comb~2 ; - ;
; RD[2] ; 88 ; 2 ; 5 ; 5 ; 3 ; 4 ; 0 ; no ; no ; no ; no ; no ; yes ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; comb~2 ; - ;
; RD[3] ; 89 ; 2 ; 4 ; 5 ; 0 ; 4 ; 0 ; no ; no ; no ; no ; no ; yes ; Off ; 3.3-V LVTTL ; 8mA ; yes ; User ; 10 pF ; comb~2 ; - ;
; RD[3] ; 89 ; 2 ; 4 ; 5 ; 0 ; 4 ; 0 ; no ; no ; no ; no ; no ; yes ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; comb~2 ; - ;
; RD[4] ; 90 ; 2 ; 4 ; 5 ; 1 ; 4 ; 0 ; no ; no ; no ; no ; no ; yes ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; comb~2 ; - ;
; RD[5] ; 91 ; 2 ; 4 ; 5 ; 2 ; 4 ; 0 ; no ; no ; no ; no ; no ; yes ; Off ; 3.3-V LVTTL ; 8mA ; yes ; User ; 10 pF ; comb~2 ; - ;
; RD[5] ; 91 ; 2 ; 4 ; 5 ; 2 ; 4 ; 0 ; no ; no ; no ; no ; no ; yes ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; comb~2 ; - ;
; RD[6] ; 92 ; 2 ; 3 ; 5 ; 0 ; 4 ; 0 ; no ; no ; no ; no ; no ; yes ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; comb~2 ; - ;
; RD[7] ; 99 ; 2 ; 2 ; 5 ; 1 ; 6 ; 0 ; no ; no ; no ; no ; no ; yes ; Off ; 3.3-V LVTTL ; 8mA ; no ; User ; 10 pF ; comb~2 ; - ;
; SD[0] ; 50 ; 1 ; 7 ; 0 ; 1 ; 1 ; 0 ; no ; no ; yes ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; no ; User ; 10 pF ; SDOE ; - ;
; SD[0] ; 50 ; 1 ; 7 ; 0 ; 1 ; 1 ; 0 ; no ; no ; yes ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; yes ; User ; 10 pF ; SDOE ; - ;
; SD[1] ; 47 ; 1 ; 6 ; 0 ; 1 ; 1 ; 0 ; no ; no ; yes ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; no ; User ; 10 pF ; SDOE ; - ;
; SD[2] ; 56 ; 2 ; 8 ; 1 ; 0 ; 1 ; 0 ; no ; no ; yes ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; no ; User ; 10 pF ; SDOE ; - ;
; SD[2] ; 56 ; 2 ; 8 ; 1 ; 0 ; 1 ; 0 ; no ; no ; yes ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; yes ; User ; 10 pF ; SDOE ; - ;
; SD[3] ; 55 ; 2 ; 8 ; 1 ; 1 ; 1 ; 0 ; no ; no ; yes ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; no ; User ; 10 pF ; SDOE ; - ;
; SD[4] ; 51 ; 1 ; 7 ; 0 ; 0 ; 1 ; 0 ; no ; no ; yes ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; no ; User ; 10 pF ; SDOE ; - ;
; SD[5] ; 52 ; 2 ; 8 ; 1 ; 4 ; 1 ; 0 ; no ; no ; yes ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; no ; User ; 10 pF ; SDOE ; - ;
; SD[6] ; 53 ; 2 ; 8 ; 1 ; 3 ; 1 ; 0 ; no ; no ; yes ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; no ; User ; 10 pF ; SDOE ; - ;
; SD[7] ; 54 ; 2 ; 8 ; 1 ; 2 ; 1 ; 0 ; no ; no ; yes ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; no ; User ; 10 pF ; SDOE ; - ;
; SD[7] ; 54 ; 2 ; 8 ; 1 ; 2 ; 1 ; 0 ; no ; no ; yes ; no ; no ; no ; Off ; 3.3-V LVTTL ; 16mA ; yes ; User ; 10 pF ; SDOE ; - ;
+-------+-------+----------+--------------+--------------+-------------+-----------------------+--------------------+--------+-----------------+----------------+-----------------+------------+----------+--------------+--------------+------------------+------------------------+----------------------+-------+----------------------+---------------------+
@ -438,7 +438,7 @@ Note: User assignments will override these defaults. The user specified values a
+----------------------------+-------------+--------------+------------+------+--------------+--------------+-------------------+------------------+-----------------+------------+---------------------+-------------+--------------+
; Compilation Hierarchy Node ; Logic Cells ; LC Registers ; UFM Blocks ; Pins ; Virtual Pins ; LUT-Only LCs ; Register-Only LCs ; LUT/Register LCs ; Carry Chain LCs ; Packed LCs ; Full Hierarchy Name ; Entity Name ; Library Name ;
+----------------------------+-------------+--------------+------------+------+--------------+--------------+-------------------+------------------+-----------------+------------+---------------------+-------------+--------------+
; |GR8RAM ; 236 (236) ; 117 ; 0 ; 80 ; 0 ; 119 (119) ; 1 (1) ; 116 (116) ; 37 (37) ; 20 (20) ; |GR8RAM ; GR8RAM ; work ;
; |GR8RAM ; 220 (220) ; 100 ; 0 ; 80 ; 0 ; 120 (120) ; 1 (1) ; 99 (99) ; 37 (37) ; 4 (4) ; |GR8RAM ; GR8RAM ; work ;
+----------------------------+-------------+--------------+------------+------+--------------+--------------+-------------------+------------------+-----------------+------------+---------------------+-------------+--------------+
Note: For table entries with two numbers listed, the numbers in parentheses indicate the number of resources of the given type used by the specific entity alone. The numbers listed outside of parentheses indicate the total resources of the given type used by the specific entity and all of its sub-entities in the hierarchy.
@ -449,8 +449,6 @@ Note: For table entries with two numbers listed, the numbers in parentheses indi
; Name ; Pin Type ; Pad to Core 0 ;
+----------+----------+---------------+
; nRESout ; Output ; -- ;
; SetFW[0] ; Input ; (0) ;
; SetFW[1] ; Input ; (0) ;
; INTout ; Output ; -- ;
; DMAout ; Output ; -- ;
; nNMIout ; Output ; -- ;
@ -506,10 +504,15 @@ Note: For table entries with two numbers listed, the numbers in parentheses indi
; DMAin ; Input ; (1) ;
; PHI0 ; Input ; (0) ;
; nWE ; Input ; (1) ;
; RA[0] ; Input ; (1) ;
; SetFW[1] ; Input ; (1) ;
; nDEVSEL ; Input ; (1) ;
; nIOSEL ; Input ; (1) ;
; nIOSTRB ; Input ; (1) ;
; C25M ; Input ; (0) ;
; RA[1] ; Input ; (1) ;
; RA[2] ; Input ; (1) ;
; RA[3] ; Input ; (1) ;
; RA[0] ; Input ; (1) ;
; RA[4] ; Input ; (1) ;
; RA[5] ; Input ; (1) ;
; RA[6] ; Input ; (1) ;
@ -517,39 +520,38 @@ Note: For table entries with two numbers listed, the numbers in parentheses indi
; RA[8] ; Input ; (1) ;
; RA[9] ; Input ; (1) ;
; RA[10] ; Input ; (1) ;
; nIOSTRB ; Input ; (1) ;
; nIOSEL ; Input ; (1) ;
; nDEVSEL ; Input ; (1) ;
; C25M ; Input ; (0) ;
; RA[11] ; Input ; (1) ;
; nRES ; Input ; (1) ;
; RA[14] ; Input ; (1) ;
; RA[15] ; Input ; (1) ;
; RA[12] ; Input ; (1) ;
; RA[13] ; Input ; (1) ;
; nRES ; Input ; (1) ;
; MISO ; Input ; (1) ;
; SetFW[0] ; Input ; (1) ;
+----------+----------+---------------+
+------------------------------------------------------------------------------------------------------------------------------+
; Control Signals ;
+-----------+-------------+---------+---------------------------------------+--------+----------------------+------------------+
; Name ; Location ; Fan-Out ; Usage ; Global ; Global Resource Used ; Global Line Name ;
+-----------+-------------+---------+---------------------------------------+--------+----------------------+------------------+
; C25M ; PIN_64 ; 103 ; Clock ; yes ; Global Clock ; GCLK3 ;
; Equal1~0 ; LC_X7_Y3_N5 ; 19 ; Clock enable ; no ; -- ; -- ;
; Equal22~1 ; LC_X6_Y4_N6 ; 8 ; Clock enable ; no ; -- ; -- ;
; MOSIOE ; LC_X4_Y1_N9 ; 1 ; Output enable ; no ; -- ; -- ;
; PHI0 ; PIN_41 ; 15 ; Clock ; yes ; Global Clock ; GCLK2 ;
; PS[0] ; LC_X6_Y4_N5 ; 52 ; Clock enable, Sync. clear, Sync. load ; no ; -- ; -- ;
; PS[2] ; LC_X7_Y3_N1 ; 29 ; Sync. clear, Sync. load ; no ; -- ; -- ;
; SDOE ; LC_X7_Y1_N5 ; 8 ; Output enable ; no ; -- ; -- ;
; always8~2 ; LC_X6_Y2_N5 ; 8 ; Sync. load ; no ; -- ; -- ;
; always8~3 ; LC_X6_Y2_N2 ; 9 ; Sync. load ; no ; -- ; -- ;
; always8~4 ; LC_X5_Y2_N4 ; 9 ; Sync. load ; no ; -- ; -- ;
; comb~2 ; LC_X5_Y2_N1 ; 9 ; Output enable ; no ; -- ; -- ;
; nRESr ; LC_X4_Y2_N9 ; 31 ; Async. clear, Sync. clear ; yes ; Global Clock ; GCLK1 ;
+-----------+-------------+---------+---------------------------------------+--------+----------------------+------------------+
+-------------------------------------------------------------------------------------------------------------------------------+
; Control Signals ;
+------------+-------------+---------+---------------------------------------+--------+----------------------+------------------+
; Name ; Location ; Fan-Out ; Usage ; Global ; Global Resource Used ; Global Line Name ;
+------------+-------------+---------+---------------------------------------+--------+----------------------+------------------+
; C25M ; PIN_64 ; 99 ; Clock ; yes ; Global Clock ; GCLK3 ;
; Equal0~0 ; LC_X3_Y2_N7 ; 20 ; Clock enable ; no ; -- ; -- ;
; Equal17~0 ; LC_X6_Y2_N9 ; 8 ; Clock enable ; no ; -- ; -- ;
; FCKOE ; LC_X2_Y2_N6 ; 2 ; Output enable ; no ; -- ; -- ;
; IOROMRES~3 ; LC_X3_Y4_N5 ; 1 ; Async. clear ; no ; -- ; -- ;
; MOSIOE ; LC_X2_Y2_N3 ; 1 ; Output enable ; no ; -- ; -- ;
; PHI0 ; PIN_41 ; 3 ; Clock ; no ; -- ; -- ;
; PS[0] ; LC_X5_Y2_N9 ; 42 ; Clock enable, Sync. clear, Sync. load ; no ; -- ; -- ;
; PS[2] ; LC_X5_Y2_N7 ; 28 ; Sync. clear, Sync. load ; no ; -- ; -- ;
; SDOE ; LC_X7_Y1_N5 ; 8 ; Output enable ; no ; -- ; -- ;
; always8~1 ; LC_X6_Y4_N9 ; 8 ; Sync. load ; no ; -- ; -- ;
; always8~2 ; LC_X6_Y4_N5 ; 9 ; Sync. load ; no ; -- ; -- ;
; always8~3 ; LC_X6_Y3_N9 ; 9 ; Sync. load ; no ; -- ; -- ;
; comb~2 ; LC_X5_Y3_N4 ; 9 ; Output enable ; no ; -- ; -- ;
; nRESr ; LC_X6_Y1_N3 ; 30 ; Async. clear, Sync. clear ; yes ; Global Clock ; GCLK2 ;
+------------+-------------+---------+---------------------------------------+--------+----------------------+------------------+
+-------------------------------------------------------------------------+
@ -557,9 +559,8 @@ Note: For table entries with two numbers listed, the numbers in parentheses indi
+-------+-------------+---------+----------------------+------------------+
; Name ; Location ; Fan-Out ; Global Resource Used ; Global Line Name ;
+-------+-------------+---------+----------------------+------------------+
; C25M ; PIN_64 ; 103 ; Global Clock ; GCLK3 ;
; PHI0 ; PIN_41 ; 15 ; Global Clock ; GCLK2 ;
; nRESr ; LC_X4_Y2_N9 ; 31 ; Global Clock ; GCLK1 ;
; C25M ; PIN_64 ; 99 ; Global Clock ; GCLK3 ;
; nRESr ; LC_X6_Y1_N3 ; 30 ; Global Clock ; GCLK2 ;
+-------+-------------+---------+----------------------+------------------+
@ -568,20 +569,20 @@ Note: For table entries with two numbers listed, the numbers in parentheses indi
+-----------------------+--------------------+
; Routing Resource Type ; Usage ;
+-----------------------+--------------------+
; C4s ; 224 / 784 ( 29 % ) ;
; Direct links ; 55 / 888 ( 6 % ) ;
; Global clocks ; 3 / 4 ( 75 % ) ;
; LAB clocks ; 14 / 32 ( 44 % ) ;
; LUT chains ; 32 / 216 ( 15 % ) ;
; Local interconnects ; 418 / 888 ( 47 % ) ;
; R4s ; 228 / 704 ( 32 % ) ;
; C4s ; 223 / 784 ( 28 % ) ;
; Direct links ; 51 / 888 ( 6 % ) ;
; Global clocks ; 2 / 4 ( 50 % ) ;
; LAB clocks ; 8 / 32 ( 25 % ) ;
; LUT chains ; 27 / 216 ( 13 % ) ;
; Local interconnects ; 392 / 888 ( 44 % ) ;
; R4s ; 197 / 704 ( 28 % ) ;
+-----------------------+--------------------+
+---------------------------------------------------------------------------+
; LAB Logic Elements ;
+--------------------------------------------+------------------------------+
; Number of Logic Elements (Average = 9.83) ; Number of LABs (Total = 24) ;
; Number of Logic Elements (Average = 9.57) ; Number of LABs (Total = 23) ;
+--------------------------------------------+------------------------------+
; 1 ; 0 ;
; 2 ; 0 ;
@ -589,67 +590,63 @@ Note: For table entries with two numbers listed, the numbers in parentheses indi
; 4 ; 0 ;
; 5 ; 0 ;
; 6 ; 0 ;
; 7 ; 0 ;
; 8 ; 1 ;
; 9 ; 2 ;
; 10 ; 21 ;
; 7 ; 1 ;
; 8 ; 3 ;
; 9 ; 1 ;
; 10 ; 18 ;
+--------------------------------------------+------------------------------+
+-------------------------------------------------------------------+
; LAB-wide Signals ;
+------------------------------------+------------------------------+
; LAB-wide Signals (Average = 1.88) ; Number of LABs (Total = 24) ;
; LAB-wide Signals (Average = 1.74) ; Number of LABs (Total = 23) ;
+------------------------------------+------------------------------+
; 1 Async. clear ; 5 ;
; 1 Clock ; 20 ;
; 1 Clock enable ; 5 ;
; 1 Sync. clear ; 7 ;
; 1 Clock ; 21 ;
; 1 Clock enable ; 4 ;
; 1 Sync. clear ; 5 ;
; 1 Sync. load ; 4 ;
; 2 Clocks ; 4 ;
; 2 Clocks ; 1 ;
+------------------------------------+------------------------------+
+-----------------------------------------------------------------------------+
; LAB Signals Sourced ;
+----------------------------------------------+------------------------------+
; Number of Signals Sourced (Average = 10.63) ; Number of LABs (Total = 24) ;
+----------------------------------------------+------------------------------+
; 0 ; 0 ;
; 1 ; 0 ;
; 2 ; 0 ;
; 3 ; 0 ;
; 4 ; 0 ;
; 5 ; 0 ;
; 6 ; 0 ;
; 7 ; 0 ;
; 8 ; 1 ;
; 9 ; 2 ;
; 10 ; 14 ;
; 11 ; 2 ;
; 12 ; 2 ;
; 13 ; 1 ;
; 14 ; 1 ;
; 15 ; 0 ;
; 16 ; 1 ;
+----------------------------------------------+------------------------------+
+----------------------------------------------------------------------------+
; LAB Signals Sourced ;
+---------------------------------------------+------------------------------+
; Number of Signals Sourced (Average = 9.78) ; Number of LABs (Total = 23) ;
+---------------------------------------------+------------------------------+
; 0 ; 0 ;
; 1 ; 0 ;
; 2 ; 0 ;
; 3 ; 0 ;
; 4 ; 0 ;
; 5 ; 0 ;
; 6 ; 0 ;
; 7 ; 1 ;
; 8 ; 2 ;
; 9 ; 2 ;
; 10 ; 15 ;
; 11 ; 2 ;
; 12 ; 1 ;
+---------------------------------------------+------------------------------+
+--------------------------------------------------------------------------------+
; LAB Signals Sourced Out ;
+-------------------------------------------------+------------------------------+
; Number of Signals Sourced Out (Average = 7.21) ; Number of LABs (Total = 24) ;
; Number of Signals Sourced Out (Average = 7.00) ; Number of LABs (Total = 23) ;
+-------------------------------------------------+------------------------------+
; 0 ; 0 ;
; 1 ; 0 ;
; 2 ; 0 ;
; 2 ; 1 ;
; 3 ; 2 ;
; 4 ; 1 ;
; 5 ; 3 ;
; 6 ; 2 ;
; 4 ; 2 ;
; 5 ; 2 ;
; 6 ; 1 ;
; 7 ; 3 ;
; 8 ; 5 ;
; 9 ; 5 ;
; 8 ; 3 ;
; 9 ; 6 ;
; 10 ; 3 ;
+-------------------------------------------------+------------------------------+
@ -657,7 +654,7 @@ Note: For table entries with two numbers listed, the numbers in parentheses indi
+-----------------------------------------------------------------------------+
; LAB Distinct Inputs ;
+----------------------------------------------+------------------------------+
; Number of Distinct Inputs (Average = 15.50) ; Number of LABs (Total = 24) ;
; Number of Distinct Inputs (Average = 14.87) ; Number of LABs (Total = 23) ;
+----------------------------------------------+------------------------------+
; 0 ; 0 ;
; 1 ; 0 ;
@ -665,24 +662,27 @@ Note: For table entries with two numbers listed, the numbers in parentheses indi
; 3 ; 0 ;
; 4 ; 1 ;
; 5 ; 0 ;
; 6 ; 0 ;
; 6 ; 1 ;
; 7 ; 1 ;
; 8 ; 0 ;
; 9 ; 0 ;
; 10 ; 1 ;
; 11 ; 1 ;
; 12 ; 0 ;
; 13 ; 4 ;
; 14 ; 4 ;
; 15 ; 0 ;
; 16 ; 2 ;
; 10 ; 2 ;
; 11 ; 0 ;
; 12 ; 2 ;
; 13 ; 3 ;
; 14 ; 1 ;
; 15 ; 2 ;
; 16 ; 1 ;
; 17 ; 2 ;
; 18 ; 0 ;
; 19 ; 2 ;
; 18 ; 1 ;
; 19 ; 1 ;
; 20 ; 2 ;
; 21 ; 1 ;
; 22 ; 2 ;
; 21 ; 0 ;
; 22 ; 1 ;
; 23 ; 1 ;
; 24 ; 0 ;
; 25 ; 0 ;
; 26 ; 1 ;
+----------------------------------------------+------------------------------+
@ -725,13 +725,8 @@ Info (332111): Found 2 clocks
Info (332111): 978.000 PHI0
Info (186079): Completed User Assigned Global Signals Promotion Operation
Info (186215): Automatically promoted signal "C25M" to use Global clock in PIN 64 File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 9
Info (186216): Automatically promoted some destinations of signal "PHI0" to use Global clock File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 9
Info (186217): Destination "comb~0" may be non-global or may not use global clock
Info (186217): Destination "PHI0r1" may be non-global or may not use global clock File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 10
Info (186228): Pin "PHI0" drives global clock, but is not placed in a dedicated clock pin position File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 9
Info (186216): Automatically promoted some destinations of signal "nRESr" to use Global clock File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 16
Info (186217): Destination "IOROMEN" may be non-global or may not use global clock File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 88
Info (186217): Destination "RestoreDone~0" may be non-global or may not use global clock File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 150
Info (186216): Automatically promoted some destinations of signal "nRESr" to use Global clock File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 14
Info (186217): Destination "IOROMEN" may be non-global or may not use global clock File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 69
Info (186079): Completed Auto Global Promotion Operation
Info (176234): Starting register packing
Info (186468): Started processing fast register assignments
@ -745,16 +740,16 @@ Info (170191): Fitter placement operations beginning
Info (170137): Fitter placement was successful
Info (170192): Fitter placement operations ending: elapsed time is 00:00:01
Info (170193): Fitter routing operations beginning
Info (170195): Router estimated average interconnect usage is 31% of the available device resources
Info (170196): Router estimated peak interconnect usage is 31% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5
Info (170195): Router estimated average interconnect usage is 30% of the available device resources
Info (170196): Router estimated peak interconnect usage is 30% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5
Info (170194): Fitter routing operations ending: elapsed time is 00:00:00
Info (11888): Total time spent on timing analysis during the Fitter is 0.31 seconds.
Info (11888): Total time spent on timing analysis during the Fitter is 0.27 seconds.
Info (11218): Fitter post-fit operations ending: elapsed time is 00:00:00
Warning (169174): The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'.
Info (144001): Generated suppressed messages file Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.fit.smsg
Info: Quartus Prime Fitter was successful. 0 errors, 3 warnings
Info: Peak virtual memory: 13733 megabytes
Info: Processing ended: Tue Mar 28 05:06:35 2023
Info: Peak virtual memory: 13732 megabytes
Info: Processing ended: Fri Apr 14 00:01:38 2023
Info: Elapsed time: 00:00:03
Info: Total CPU time (on all processors): 00:00:04

4
cpld/output_files/GR8RAM.fit.summary
View File

@ -1,11 +1,11 @@
Fitter Status : Successful - Tue Mar 28 05:06:35 2023
Fitter Status : Successful - Fri Apr 14 00:01:38 2023
Quartus Prime Version : 19.1.0 Build 670 09/22/2019 SJ Lite Edition
Revision Name : GR8RAM
Top-level Entity Name : GR8RAM
Family : MAX II
Device : EPM240T100C5
Timing Models : Final
Total logic elements : 236 / 240 ( 98 % )
Total logic elements : 220 / 240 ( 92 % )
Total pins : 80 / 80 ( 100 % )
Total virtual pins : 0
UFM blocks : 0 / 1 ( 0 % )

20
cpld/output_files/GR8RAM.flow.rpt
View File

@ -1,5 +1,5 @@
Flow report for GR8RAM
Tue Mar 28 05:06:39 2023
Fri Apr 14 00:01:43 2023
Quartus Prime Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition
@ -41,14 +41,14 @@ https://fpgasoftware.intel.com/eula.
+---------------------------------------------------------------------+
; Flow Summary ;
+-----------------------+---------------------------------------------+
; Flow Status ; Successful - Tue Mar 28 05:06:37 2023 ;
; Flow Status ; Successful - Fri Apr 14 00:01:40 2023 ;
; Quartus Prime Version ; 19.1.0 Build 670 09/22/2019 SJ Lite Edition ;
; Revision Name ; GR8RAM ;
; Top-level Entity Name ; GR8RAM ;
; Family ; MAX II ;
; Device ; EPM240T100C5 ;
; Timing Models ; Final ;
; Total logic elements ; 236 / 240 ( 98 % ) ;
; Total logic elements ; 220 / 240 ( 92 % ) ;
; Total pins ; 80 / 80 ( 100 % ) ;
; Total virtual pins ; 0 ;
; UFM blocks ; 0 / 1 ( 0 % ) ;
@ -60,7 +60,7 @@ https://fpgasoftware.intel.com/eula.
+-------------------+---------------------+
; Option ; Setting ;
+-------------------+---------------------+
; Start date & time ; 03/28/2023 05:06:13 ;
; Start date & time ; 04/14/2023 00:01:17 ;
; Main task ; Compilation ;
; Revision Name ; GR8RAM ;
+-------------------+---------------------+
@ -76,7 +76,7 @@ https://fpgasoftware.intel.com/eula.
; ALM_REGISTER_PACKING_EFFORT ; High ; Medium ; -- ; -- ;
; AUTO_PACKED_REGISTERS_MAX ; Minimize Area ; Auto ; -- ; -- ;
; AUTO_RESOURCE_SHARING ; On ; Off ; -- ; -- ;
; COMPILER_SIGNATURE_ID ; 121381084694.167999437303928 ; -- ; -- ; -- ;
; COMPILER_SIGNATURE_ID ; 121381084694.168144487708968 ; -- ; -- ; -- ;
; FINAL_PLACEMENT_OPTIMIZATION ; Always ; Automatically ; -- ; -- ;
; FITTER_EFFORT ; Standard Fit ; Auto Fit ; -- ; -- ;
; IOBANK_VCCIO ; -- (Not supported for targeted family) ; -- ; -- ; 1 ;
@ -103,11 +103,11 @@ https://fpgasoftware.intel.com/eula.
+----------------------+--------------+-------------------------+---------------------+------------------------------------+
; Module Name ; Elapsed Time ; Average Processors Used ; Peak Virtual Memory ; Total CPU Time (on all processors) ;
+----------------------+--------------+-------------------------+---------------------+------------------------------------+
; Analysis & Synthesis ; 00:00:18 ; 1.0 ; 13094 MB ; 00:00:39 ;
; Fitter ; 00:00:03 ; 1.0 ; 13733 MB ; 00:00:04 ;
; Assembler ; 00:00:01 ; 1.0 ; 13053 MB ; 00:00:01 ;
; Timing Analyzer ; 00:00:01 ; 1.0 ; 13052 MB ; 00:00:01 ;
; Total ; 00:00:23 ; -- ; -- ; 00:00:45 ;
; Analysis & Synthesis ; 00:00:18 ; 1.0 ; 13092 MB ; 00:00:39 ;
; Fitter ; 00:00:03 ; 1.0 ; 13732 MB ; 00:00:04 ;
; Assembler ; 00:00:01 ; 1.0 ; 13052 MB ; 00:00:01 ;
; Timing Analyzer ; 00:00:02 ; 1.0 ; 13051 MB ; 00:00:01 ;
; Total ; 00:00:24 ; -- ; -- ; 00:00:45 ;
+----------------------+--------------+-------------------------+---------------------+------------------------------------+

123
cpld/output_files/GR8RAM.map.rpt
View File

@ -1,5 +1,5 @@
Analysis & Synthesis report for GR8RAM
Tue Mar 28 05:06:31 2023
Fri Apr 14 00:01:34 2023
Quartus Prime Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition
@ -46,12 +46,12 @@ https://fpgasoftware.intel.com/eula.
+---------------------------------------------------------------------------+
; Analysis & Synthesis Summary ;
+-----------------------------+---------------------------------------------+
; Analysis & Synthesis Status ; Successful - Tue Mar 28 05:06:31 2023 ;
; Analysis & Synthesis Status ; Successful - Fri Apr 14 00:01:34 2023 ;
; Quartus Prime Version ; 19.1.0 Build 670 09/22/2019 SJ Lite Edition ;
; Revision Name ; GR8RAM ;
; Top-level Entity Name ; GR8RAM ;
; Family ; MAX II ;
; Total logic elements ; 256 ;
; Total logic elements ; 225 ;
; Total pins ; 80 ;
; Total virtual pins ; 0 ;
; UFM blocks ; 0 / 1 ( 0 % ) ;
@ -159,33 +159,33 @@ https://fpgasoftware.intel.com/eula.
+---------------------------------------------+-------+
; Resource ; Usage ;
+---------------------------------------------+-------+
; Total logic elements ; 256 ;
; -- Combinational with no register ; 139 ;
; -- Register only ; 21 ;
; -- Combinational with a register ; 96 ;
; Total logic elements ; 225 ;
; -- Combinational with no register ; 125 ;
; -- Register only ; 6 ;
; -- Combinational with a register ; 94 ;
; ; ;
; Logic element usage by number of LUT inputs ; ;
; -- 4 input functions ; 137 ;
; -- 3 input functions ; 35 ;
; -- 2 input functions ; 63 ;
; -- 1 input functions ; 0 ;
; -- 4 input functions ; 120 ;
; -- 3 input functions ; 32 ;
; -- 2 input functions ; 66 ;
; -- 1 input functions ; 1 ;
; -- 0 input functions ; 0 ;
; ; ;
; Logic elements by mode ; ;
; -- normal mode ; 223 ;
; -- normal mode ; 192 ;
; -- arithmetic mode ; 33 ;
; -- qfbk mode ; 0 ;
; -- register cascade mode ; 0 ;
; -- synchronous clear/load mode ; 44 ;
; -- asynchronous clear/load mode ; 29 ;
; -- synchronous clear/load mode ; 45 ;
; -- asynchronous clear/load mode ; 30 ;
; ; ;
; Total registers ; 117 ;
; Total registers ; 100 ;
; Total logic cells in carry chains ; 37 ;
; I/O pins ; 80 ;
; Maximum fan-out node ; C25M ;
; Maximum fan-out ; 103 ;
; Total fan-out ; 1104 ;
; Average fan-out ; 3.29 ;
; Maximum fan-out ; 99 ;
; Total fan-out ; 1009 ;
; Average fan-out ; 3.31 ;
+---------------------------------------------+-------+
@ -194,7 +194,7 @@ https://fpgasoftware.intel.com/eula.
+----------------------------+-------------+--------------+------------+------+--------------+--------------+-------------------+------------------+-----------------+------------+---------------------+-------------+--------------+
; Compilation Hierarchy Node ; Logic Cells ; LC Registers ; UFM Blocks ; Pins ; Virtual Pins ; LUT-Only LCs ; Register-Only LCs ; LUT/Register LCs ; Carry Chain LCs ; Packed LCs ; Full Hierarchy Name ; Entity Name ; Library Name ;
+----------------------------+-------------+--------------+------------+------+--------------+--------------+-------------------+------------------+-----------------+------------+---------------------+-------------+--------------+
; |GR8RAM ; 256 (256) ; 117 ; 0 ; 80 ; 0 ; 139 (139) ; 21 (21) ; 96 (96) ; 37 (37) ; 0 (0) ; |GR8RAM ; GR8RAM ; work ;
; |GR8RAM ; 225 (225) ; 100 ; 0 ; 80 ; 0 ; 125 (125) ; 6 (6) ; 94 (94) ; 37 (37) ; 0 (0) ; |GR8RAM ; GR8RAM ; work ;
+----------------------------+-------------+--------------+------------+------+--------------+--------------+-------------------+------------------+-----------------+------------+---------------------+-------------+--------------+
Note: For table entries with two numbers listed, the numbers in parentheses indicate the number of resources of the given type used by the specific entity alone. The numbers listed outside of parentheses indicate the total resources of the given type used by the specific entity and all of its sub-entities in the hierarchy.
@ -214,15 +214,14 @@ Encoding Type: Minimal Bits
+--------+----------------+----------------+----------------+
+--------------------------------------------------------------------------------+
; Registers Removed During Synthesis ;
+---------------------------------------+----------------------------------------+
; Register name ; Reason for Removal ;
+---------------------------------------+----------------------------------------+
; SBA[0]~reg0 ; Stuck at GND due to stuck port data_in ;
; IS~10 ; Lost fanout ;
; Total Number of Removed Registers = 2 ; ;
+---------------------------------------+----------------------------------------+
+------------------------------------------------------------+
; Registers Removed During Synthesis ;
+---------------------------------------+--------------------+
; Register name ; Reason for Removal ;
+---------------------------------------+--------------------+
; IS~10 ; Lost fanout ;
; Total Number of Removed Registers = 1 ; ;
+---------------------------------------+--------------------+
+------------------------------------------------------+
@ -230,12 +229,12 @@ Encoding Type: Minimal Bits
+----------------------------------------------+-------+
; Statistic ; Value ;
+----------------------------------------------+-------+
; Total registers ; 117 ;
; Number of registers using Synchronous Clear ; 11 ;
; Total registers ; 100 ;
; Number of registers using Synchronous Clear ; 12 ;
; Number of registers using Synchronous Load ; 33 ;
; Number of registers using Asynchronous Clear ; 29 ;
; Number of registers using Asynchronous Clear ; 30 ;
; Number of registers using Asynchronous Load ; 0 ;
; Number of registers using Clock Enable ; 22 ;
; Number of registers using Clock Enable ; 24 ;
; Number of registers using Preset ; 0 ;
+----------------------------------------------+-------+
@ -251,9 +250,8 @@ Encoding Type: Minimal Bits
; nSWE~reg0 ; 1 ;
; DQML~reg0 ; 1 ;
; DQMH~reg0 ; 1 ;
; RCKE~reg0 ; 1 ;
; nFCS~reg0 ; 1 ;
; Total number of inverted registers = 8 ; ;
; RCKE~reg0 ; 4 ;
; Total number of inverted registers = 7 ; ;
+----------------------------------------+---------+
@ -262,13 +260,14 @@ Encoding Type: Minimal Bits
+--------------------+-----------+---------------+----------------------+------------------------+------------+----------------------------+
; Multiplexer Inputs ; Bus Width ; Baseline Area ; Area if Restructured ; Saving if Restructured ; Registered ; Example Multiplexer Output ;
+--------------------+-----------+---------------+----------------------+------------------------+------------+----------------------------+
; 3:1 ; 4 bits ; 8 LEs ; 8 LEs ; 0 LEs ; Yes ; |GR8RAM|PS[2] ;
; 4:1 ; 3 bits ; 6 LEs ; 3 LEs ; 3 LEs ; Yes ; |GR8RAM|SA[9]~reg0 ;
; 20:1 ; 6 bits ; 78 LEs ; 24 LEs ; 54 LEs ; Yes ; |GR8RAM|SA[8]~reg0 ;
; 20:1 ; 2 bits ; 26 LEs ; 12 LEs ; 14 LEs ; Yes ; |GR8RAM|SA[1]~reg0 ;
; 3:1 ; 8 bits ; 16 LEs ; 16 LEs ; 0 LEs ; Yes ; |GR8RAM|WRD[0] ;
; 5:1 ; 7 bits ; 21 LEs ; 14 LEs ; 7 LEs ; Yes ; |GR8RAM|RDD[0] ;
; 18:1 ; 2 bits ; 24 LEs ; 8 LEs ; 16 LEs ; Yes ; |GR8RAM|DQMH~reg0 ;
; 3:1 ; 4 bits ; 8 LEs ; 8 LEs ; 0 LEs ; Yes ; |GR8RAM|PS[1] ;
; 5:1 ; 2 bits ; 6 LEs ; 2 LEs ; 4 LEs ; Yes ; |GR8RAM|SA[11]~reg0 ;
; 20:1 ; 6 bits ; 78 LEs ; 24 LEs ; 54 LEs ; Yes ; |GR8RAM|SA[6]~reg0 ;
; 20:1 ; 3 bits ; 39 LEs ; 18 LEs ; 21 LEs ; Yes ; |GR8RAM|SA[2]~reg0 ;
; 3:1 ; 8 bits ; 16 LEs ; 16 LEs ; 0 LEs ; Yes ; |GR8RAM|WRD[5] ;
; 17:1 ; 4 bits ; 44 LEs ; 8 LEs ; 36 LEs ; Yes ; |GR8RAM|RDD[2] ;
; 18:1 ; 2 bits ; 24 LEs ; 8 LEs ; 16 LEs ; Yes ; |GR8RAM|DQML~reg0 ;
; 18:1 ; 4 bits ; 48 LEs ; 8 LEs ; 40 LEs ; Yes ; |GR8RAM|RDD[6] ;
; 7:1 ; 5 bits ; 20 LEs ; 20 LEs ; 0 LEs ; No ; |GR8RAM|IS ;
+--------------------+-----------+---------------+----------------------+------------------------+------------+----------------------------+
@ -279,41 +278,37 @@ Encoding Type: Minimal Bits
Info: *******************************************************************
Info: Running Quartus Prime Analysis & Synthesis
Info: Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition
Info: Processing started: Tue Mar 28 05:06:13 2023
Info: Processing started: Fri Apr 14 00:01:16 2023
Info: Command: quartus_map --read_settings_files=on --write_settings_files=off GR8RAM -c GR8RAM
Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance.
Info (20030): Parallel compilation is enabled and will use 4 of the 4 processors detected
Info (12021): Found 1 design units, including 1 entities, in source file gr8ram.v
Info (12023): Found entity 1: GR8RAM File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 1
Info (12127): Elaborating entity "GR8RAM" for the top level hierarchy
Warning (10230): Verilog HDL assignment warning at GR8RAM.v(34): truncated value with size 32 to match size of target (4) File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 34
Warning (10230): Verilog HDL assignment warning at GR8RAM.v(39): truncated value with size 32 to match size of target (14) File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 39
Warning (10230): Verilog HDL assignment warning at GR8RAM.v(128): truncated value with size 32 to match size of target (8) File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 128
Warning (10230): Verilog HDL assignment warning at GR8RAM.v(136): truncated value with size 32 to match size of target (8) File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 136
Warning (10230): Verilog HDL assignment warning at GR8RAM.v(143): truncated value with size 32 to match size of target (8) File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 143
Warning (10230): Verilog HDL assignment warning at GR8RAM.v(31): truncated value with size 32 to match size of target (4) File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 31
Warning (10230): Verilog HDL assignment warning at GR8RAM.v(36): truncated value with size 32 to match size of target (14) File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 36
Warning (10230): Verilog HDL assignment warning at GR8RAM.v(109): truncated value with size 32 to match size of target (8) File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 109
Warning (10230): Verilog HDL assignment warning at GR8RAM.v(117): truncated value with size 32 to match size of target (8) File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 117
Warning (10230): Verilog HDL assignment warning at GR8RAM.v(124): truncated value with size 32 to match size of target (8) File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 124
Info (17026): Resynthesizing 0 WYSIWYG logic cells and I/Os using "area" technology mapper which leaves 0 WYSIWYG logic cells and I/Os untouched
Warning (13024): Output pins are stuck at VCC or GND
Warning (13410): Pin "nNMIout" is stuck at VCC File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 559
Warning (13410): Pin "nIRQout" is stuck at VCC File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 562
Warning (13410): Pin "nRDYout" is stuck at VCC File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 561
Warning (13410): Pin "nINHout" is stuck at VCC File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 560
Warning (13410): Pin "RWout" is stuck at VCC File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 563
Warning (13410): Pin "nDMAout" is stuck at VCC File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 558
Warning (13410): Pin "RAdir" is stuck at VCC File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 557
Warning (13410): Pin "SBA[0]" is stuck at GND File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 442
Warning (13410): Pin "nNMIout" is stuck at VCC File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 541
Warning (13410): Pin "nIRQout" is stuck at VCC File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 544
Warning (13410): Pin "nRDYout" is stuck at VCC File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 543
Warning (13410): Pin "nINHout" is stuck at VCC File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 542
Warning (13410): Pin "RWout" is stuck at VCC File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 545
Warning (13410): Pin "nDMAout" is stuck at VCC File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 540
Warning (13410): Pin "RAdir" is stuck at VCC File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 539
Info (17049): 1 registers lost all their fanouts during netlist optimizations.
Warning (21074): Design contains 2 input pin(s) that do not drive logic
Warning (15610): No output dependent on input pin "SetFW[0]" File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 23
Warning (15610): No output dependent on input pin "SetFW[1]" File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 23
Info (21057): Implemented 336 device resources after synthesis - the final resource count might be different
Info (21057): Implemented 305 device resources after synthesis - the final resource count might be different
Info (21058): Implemented 28 input pins
Info (21059): Implemented 35 output pins
Info (21060): Implemented 17 bidirectional pins
Info (21061): Implemented 256 logic cells
Info (21061): Implemented 225 logic cells
Info (144001): Generated suppressed messages file Y:/Repos/GR8RAM/cpld/output_files/GR8RAM.map.smsg
Info: Quartus Prime Analysis & Synthesis was successful. 0 errors, 18 warnings
Info: Peak virtual memory: 13094 megabytes
Info: Processing ended: Tue Mar 28 05:06:31 2023
Info: Quartus Prime Analysis & Synthesis was successful. 0 errors, 14 warnings
Info: Peak virtual memory: 13092 megabytes
Info: Processing ended: Fri Apr 14 00:01:34 2023
Info: Elapsed time: 00:00:18
Info: Total CPU time (on all processors): 00:00:39

4
cpld/output_files/GR8RAM.map.smsg
View File

@ -1,2 +1,2 @@
Warning (10273): Verilog HDL warning at GR8RAM.v(104): extended using "x" or "z" File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 104
Warning (10273): Verilog HDL warning at GR8RAM.v(281): extended using "x" or "z" File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 281
Warning (10273): Verilog HDL warning at GR8RAM.v(85): extended using "x" or "z" File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 85
Warning (10273): Verilog HDL warning at GR8RAM.v(261): extended using "x" or "z" File: Y:/Repos/GR8RAM/cpld/GR8RAM.v Line: 261

4
cpld/output_files/GR8RAM.map.summary
View File

@ -1,9 +1,9 @@
Analysis & Synthesis Status : Successful - Tue Mar 28 05:06:31 2023
Analysis & Synthesis Status : Successful - Fri Apr 14 00:01:34 2023
Quartus Prime Version : 19.1.0 Build 670 09/22/2019 SJ Lite Edition
Revision Name : GR8RAM
Top-level Entity Name : GR8RAM
Family : MAX II
Total logic elements : 256
Total logic elements : 225
Total pins : 80
Total virtual pins : 0
UFM blocks : 0 / 1 ( 0 % )

BIN
cpld/output_files/GR8RAM.pof
View File

Binary file not shown.

580
cpld/output_files/GR8RAM.sta.rpt
View File

@ -1,5 +1,5 @@
Timing Analyzer report for GR8RAM
Tue Mar 28 05:06:39 2023
Fri Apr 14 00:01:43 2023
Quartus Prime Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition
@ -84,7 +84,7 @@ https://fpgasoftware.intel.com/eula.
; ; ;
; Usage by Processor ; % Time Used ;
; Processor 1 ; 100.0% ;
; Processor 2 ; 0.2% ;
; Processor 2 ; 0.0% ;
+----------------------------+-------------+
@ -93,7 +93,7 @@ https://fpgasoftware.intel.com/eula.
+---------------+--------+--------------------------+
; SDC File Path ; Status ; Read at ;
+---------------+--------+--------------------------+
; GR8RAM.sdc ; OK ; Tue Mar 28 05:06:39 2023 ;
; GR8RAM.sdc ; OK ; Fri Apr 14 00:01:43 2023 ;
+---------------+--------+--------------------------+
@ -112,7 +112,7 @@ https://fpgasoftware.intel.com/eula.
+-----------+-----------------+------------+------+
; Fmax ; Restricted Fmax ; Clock Name ; Note ;
+-----------+-----------------+------------+------+
; 66.42 MHz ; 66.42 MHz ; C25M ; ;
; 86.99 MHz ; 86.99 MHz ; C25M ; ;
+-----------+-----------------+------------+------+
This panel reports FMAX for every clock in the design, regardless of the user-specified clock periods. FMAX is only computed for paths where the source and destination registers or ports are driven by the same clock. Paths of different clocks, including generated clocks, are ignored. For paths between a clock and its inversion, FMAX is computed as if the rising and falling edges are scaled along with FMAX, such that the duty cycle (in terms of a percentage) is maintained. Altera recommends that you always use clock constraints and other slack reports for sign-off analysis.
@ -122,7 +122,7 @@ This panel reports FMAX for every clock in the design, regardless of the user-sp
+-------+--------+---------------+
; Clock ; Slack ; End Point TNS ;
+-------+--------+---------------+
; C25M ; 12.472 ; 0.000 ;
; C25M ; 14.252 ; 0.000 ;
+-------+--------+---------------+
@ -131,7 +131,7 @@ This panel reports FMAX for every clock in the design, regardless of the user-sp
+-------+-------+---------------+
; Clock ; Slack ; End Point TNS ;
+-------+-------+---------------+
; C25M ; 1.383 ; 0.000 ;
; C25M ; 1.394 ; 0.000 ;
+-------+-------+---------------+
@ -140,7 +140,7 @@ This panel reports FMAX for every clock in the design, regardless of the user-sp
+-------+--------+---------------+
; Clock ; Slack ; End Point TNS ;
+-------+--------+---------------+
; C25M ; 33.331 ; 0.000 ;
; C25M ; 33.179 ; 0.000 ;
+-------+--------+---------------+
@ -149,7 +149,7 @@ This panel reports FMAX for every clock in the design, regardless of the user-sp
+-------+-------+---------------+
; Clock ; Slack ; End Point TNS ;
+-------+-------+---------------+
; C25M ; 6.115 ; 0.000 ;
; C25M ; 6.267 ; 0.000 ;
+-------+-------+---------------+
@ -168,106 +168,106 @@ This panel reports FMAX for every clock in the design, regardless of the user-sp
+--------+----------------+----------------+--------------+-------------+--------------+------------+------------+
; Slack ; From Node ; To Node ; Launch Clock ; Latch Clock ; Relationship ; Clock Skew ; Data Delay ;
+--------+----------------+----------------+--------------+-------------+--------------+------------+------------+
; 12.472 ; REGEN ; RDD[5] ; C25M ; C25M ; 20.000 ; 0.000 ; 7.195 ;
; 12.473 ; REGEN ; RDD[3] ; C25M ; C25M ; 20.000 ; 0.000 ; 7.194 ;
; 12.485 ; REGEN ; RDD[6] ; C25M ; C25M ; 20.000 ; 0.000 ; 7.182 ;
; 12.571 ; REGEN ; RDD[0] ; C25M ; C25M ; 20.000 ; 0.000 ; 7.096 ;
; 12.858 ; REGEN ; RDD[2] ; C25M ; C25M ; 20.000 ; 0.000 ; 6.809 ;
; 12.946 ; REGEN ; RDD[1] ; C25M ; C25M ; 20.000 ; 0.000 ; 6.721 ;
; 12.947 ; REGEN ; RDD[4] ; C25M ; C25M ; 20.000 ; 0.000 ; 6.720 ;
; 13.462 ; PS[3] ; RDD[7] ; C25M ; C25M ; 20.000 ; 0.000 ; 6.205 ;
; 13.543 ; PS[3] ; RDD[3] ; C25M ; C25M ; 20.000 ; 0.000 ; 6.124 ;
; 13.543 ; PS[3] ; RDD[5] ; C25M ; C25M ; 20.000 ; 0.000 ; 6.124 ;
; 13.543 ; PS[3] ; RDD[6] ; C25M ; C25M ; 20.000 ; 0.000 ; 6.124 ;
; 13.649 ; PS[2] ; RDD[7] ; C25M ; C25M ; 20.000 ; 0.000 ; 6.018 ;
; 13.668 ; Addr[3] ; RDD[3] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.999 ;
; 13.730 ; PS[2] ; RDD[3] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.937 ;
; 13.730 ; PS[2] ; RDD[5] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.937 ;
; 13.730 ; PS[2] ; RDD[6] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.937 ;
; 13.825 ; REGEN ; RDD[7] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.842 ;
; 13.979 ; PS[1] ; RDD[7] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.688 ;
; 14.060 ; PS[1] ; RDD[3] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.607 ;
; 14.060 ; PS[1] ; RDD[5] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.607 ;
; 14.060 ; PS[1] ; RDD[6] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.607 ;
; 14.184 ; PS[3] ; RDD[1] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.483 ;
; 14.184 ; PS[3] ; RDD[2] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.483 ;
; 14.184 ; PS[3] ; RDD[4] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.483 ;
; 14.210 ; Addr[0] ; RDD[0] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.457 ;
; 14.328 ; PS[0] ; RDD[7] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.339 ;
; 14.366 ; Addr[2] ; RDD[2] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.301 ;
; 14.371 ; PS[2] ; RDD[1] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.296 ;
; 14.371 ; PS[2] ; RDD[2] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.296 ;
; 14.371 ; PS[2] ; RDD[4] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.296 ;
; 14.390 ; Addr[1] ; RDD[1] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.277 ;
; 14.409 ; PS[0] ; RDD[3] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.258 ;
; 14.409 ; PS[0] ; RDD[5] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.258 ;
; 14.409 ; PS[0] ; RDD[6] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.258 ;
; 14.445 ; Addr[4] ; RDD[4] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.222 ;
; 14.496 ; Addr[23] ; RDD[7] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.171 ;
; 14.622 ; PS[3] ; RDD[0] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.045 ;
; 14.701 ; PS[1] ; RDD[1] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.966 ;
; 14.701 ; PS[1] ; RDD[2] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.966 ;
; 14.701 ; PS[1] ; RDD[4] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.966 ;
; 14.707 ; Addr[8] ; RDD[0] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.960 ;
; 14.709 ; Addr[15] ; RDD[7] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.958 ;
; 14.809 ; PS[2] ; RDD[0] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.858 ;
; 15.050 ; PS[0] ; RDD[1] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.617 ;
; 15.050 ; PS[0] ; RDD[2] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.617 ;
; 15.050 ; PS[0] ; RDD[4] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.617 ;
; 15.061 ; Addr[5] ; RDD[5] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.606 ;
; 15.128 ; Addr[6] ; RDD[6] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.539 ;
; 15.139 ; PS[1] ; RDD[0] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.528 ;
; 15.199 ; Addr[10] ; RDD[2] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.468 ;
; 15.284 ; Addr[12] ; RDD[4] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.383 ;
; 15.322 ; Addr[7] ; RDD[7] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.345 ;
; 15.488 ; PS[0] ; RDD[0] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.179 ;
; 15.722 ; Addr[9] ; RDD[1] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.945 ;
; 16.006 ; Addr[16] ; RDD[0] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.661 ;
; 16.012 ; Addr[20] ; RDD[4] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.655 ;
; 16.089 ; Addr[22] ; RDD[6] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.578 ;
; 16.110 ; Addr[21] ; RDD[5] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.557 ;
; 16.112 ; Addr[14] ; RDD[6] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.555 ;
; 16.133 ; Addr[17] ; RDD[1] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.534 ;
; 16.142 ; Addr[13] ; RDD[5] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.525 ;
; 16.144 ; Addr[18] ; RDD[2] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.523 ;
; 16.144 ; Addr[19] ; RDD[3] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.523 ;
; 16.300 ; Addr[11] ; RDD[3] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.367 ;
; 27.034 ; IS.state_bit_0 ; SA[3]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 12.633 ;
; 27.416 ; IS.state_bit_0 ; SA[6]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 12.251 ;
; 27.568 ; Addr[23] ; SA[4]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 12.099 ;
; 27.654 ; REGEN ; SA[4]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 12.013 ;
; 27.717 ; Addr[23] ; SA[5]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.950 ;
; 27.803 ; REGEN ; SA[5]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.864 ;
; 27.841 ; IS.state_bit_1 ; SA[3]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.826 ;
; 28.219 ; Addr[23] ; SA[3]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.448 ;
; 28.223 ; IS.state_bit_1 ; SA[6]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.444 ;
; 28.238 ; LS[1] ; IS.state_bit_1 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.429 ;
; 28.251 ; Addr[23] ; SA[7]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.416 ;
; 28.266 ; Addr[23] ; SA[8]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.401 ;
; 28.305 ; REGEN ; SA[3]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.362 ;
; 28.337 ; REGEN ; SA[7]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.330 ;
; 28.352 ; REGEN ; SA[8]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.315 ;
; 28.419 ; IS.state_bit_0 ; SA[8]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.248 ;
; 28.423 ; IS.state_bit_0 ; SA[7]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.244 ;
; 28.431 ; LS[7] ; IS.state_bit_1 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.236 ;
; 28.447 ; LS[10] ; IS.state_bit_1 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.220 ;
; 28.462 ; LS[3] ; IS.state_bit_1 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.205 ;
; 28.464 ; LS[1] ; IS.state_bit_0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.203 ;
; 28.566 ; Addr[23] ; SA[6]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.101 ;
; 28.594 ; LS[9] ; IS.state_bit_1 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.073 ;
; 28.605 ; Addr[23] ; nRCS~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.062 ;
; 28.611 ; Addr[23] ; SA[0]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.056 ;
; 28.652 ; REGEN ; SA[6]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.015 ;
; 28.657 ; LS[7] ; IS.state_bit_0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.010 ;
; 28.673 ; LS[10] ; IS.state_bit_0 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.994 ;
; 28.688 ; LS[3] ; IS.state_bit_0 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.979 ;
; 28.691 ; REGEN ; nRCS~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.976 ;
; 28.696 ; Addr[23] ; RCKE~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.971 ;
; 28.697 ; REGEN ; SA[0]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.970 ;
; 28.720 ; Addr[23] ; SA[1]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.947 ;
; 28.782 ; REGEN ; RCKE~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.885 ;
; 28.784 ; LS[11] ; IS.state_bit_1 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.883 ;
; 28.806 ; REGEN ; SA[1]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.861 ;
; 14.252 ; PS[1] ; RDD[3] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.415 ;
; 14.252 ; PS[1] ; RDD[5] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.415 ;
; 14.252 ; PS[1] ; RDD[6] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.415 ;
; 14.272 ; PS[3] ; RDD[3] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.395 ;
; 14.272 ; PS[3] ; RDD[5] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.395 ;
; 14.272 ; PS[3] ; RDD[6] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.395 ;
; 14.313 ; Addr[20] ; RDD[4] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.354 ;
; 14.640 ; PS[0] ; RDD[3] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.027 ;
; 14.640 ; PS[0] ; RDD[5] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.027 ;
; 14.640 ; PS[0] ; RDD[6] ; C25M ; C25M ; 20.000 ; 0.000 ; 5.027 ;
; 14.716 ; PS[1] ; RDD[0] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.951 ;
; 14.716 ; PS[1] ; RDD[1] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.951 ;
; 14.716 ; PS[1] ; RDD[2] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.951 ;
; 14.716 ; PS[1] ; RDD[4] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.951 ;
; 14.716 ; PS[1] ; RDD[7] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.951 ;
; 14.718 ; Addr[1] ; RDD[1] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.949 ;
; 14.736 ; PS[3] ; RDD[0] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.931 ;
; 14.736 ; PS[3] ; RDD[1] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.931 ;
; 14.736 ; PS[3] ; RDD[2] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.931 ;
; 14.736 ; PS[3] ; RDD[4] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.931 ;
; 14.736 ; PS[3] ; RDD[7] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.931 ;
; 14.746 ; PS[2] ; RDD[3] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.921 ;
; 14.746 ; PS[2] ; RDD[5] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.921 ;
; 14.746 ; PS[2] ; RDD[6] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.921 ;
; 14.758 ; Addr[4] ; RDD[4] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.909 ;
; 14.841 ; Addr[17] ; RDD[1] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.826 ;
; 14.881 ; Addr[23] ; RDD[7] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.786 ;
; 14.993 ; Addr[0] ; RDD[0] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.674 ;
; 15.104 ; PS[0] ; RDD[0] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.563 ;
; 15.104 ; PS[0] ; RDD[1] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.563 ;
; 15.104 ; PS[0] ; RDD[2] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.563 ;
; 15.104 ; PS[0] ; RDD[4] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.563 ;
; 15.104 ; PS[0] ; RDD[7] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.563 ;
; 15.210 ; PS[2] ; RDD[0] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.457 ;
; 15.210 ; PS[2] ; RDD[1] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.457 ;
; 15.210 ; PS[2] ; RDD[2] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.457 ;
; 15.210 ; PS[2] ; RDD[4] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.457 ;
; 15.210 ; PS[2] ; RDD[7] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.457 ;
; 15.303 ; Addr[8] ; RDD[0] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.364 ;
; 15.404 ; Addr[3] ; RDD[3] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.263 ;
; 15.629 ; Addr[19] ; RDD[3] ; C25M ; C25M ; 20.000 ; 0.000 ; 4.038 ;
; 15.669 ; Addr[16] ; RDD[0] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.998 ;
; 15.686 ; Addr[6] ; RDD[6] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.981 ;
; 15.695 ; Addr[22] ; RDD[6] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.972 ;
; 15.762 ; Addr[12] ; RDD[4] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.905 ;
; 15.840 ; Addr[2] ; RDD[2] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.827 ;
; 15.967 ; Addr[7] ; RDD[7] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.700 ;
; 16.041 ; Addr[9] ; RDD[1] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.626 ;
; 16.139 ; Addr[21] ; RDD[5] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.528 ;
; 16.203 ; Addr[10] ; RDD[2] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.464 ;
; 16.253 ; Addr[5] ; RDD[5] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.414 ;
; 16.354 ; Addr[14] ; RDD[6] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.313 ;
; 16.389 ; Addr[18] ; RDD[2] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.278 ;
; 16.467 ; Addr[11] ; RDD[3] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.200 ;
; 16.527 ; Addr[13] ; RDD[5] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.140 ;
; 16.563 ; Addr[15] ; RDD[7] ; C25M ; C25M ; 20.000 ; 0.000 ; 3.104 ;
; 28.556 ; LS[10] ; IS.state_bit_0 ; C25M ; C25M ; 40.000 ; 0.000 ; 11.111 ;
; 28.715 ; LS[9] ; IS.state_bit_0 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.952 ;
; 28.895 ; LS[11] ; IS.state_bit_0 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.772 ;
; 28.900 ; LS[10] ; IS.state_bit_1 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.767 ;
; 29.059 ; LS[9] ; IS.state_bit_1 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.608 ;
; 29.239 ; LS[11] ; IS.state_bit_1 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.428 ;
; 29.252 ; LS[8] ; IS.state_bit_0 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.415 ;
; 29.535 ; PS[3] ; SA[5]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.132 ;
; 29.596 ; LS[8] ; IS.state_bit_1 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.071 ;
; 29.602 ; IS.state_bit_1 ; SA[5]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 10.065 ;
; 29.687 ; PS[1] ; SA[0]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.980 ;
; 29.698 ; IS.state_bit_1 ; SA[1]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.969 ;
; 29.729 ; LS[7] ; IS.state_bit_0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.938 ;
; 29.734 ; LS[3] ; IS.state_bit_0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.933 ;
; 29.770 ; PS[1] ; SA[1]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.897 ;
; 29.811 ; PS[3] ; SA[3]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.856 ;
; 29.837 ; PS[1] ; Addr[10] ; C25M ; C25M ; 40.000 ; 0.000 ; 9.830 ;
; 29.837 ; PS[1] ; Addr[11] ; C25M ; C25M ; 40.000 ; 0.000 ; 9.830 ;
; 29.837 ; PS[1] ; Addr[12] ; C25M ; C25M ; 40.000 ; 0.000 ; 9.830 ;
; 29.837 ; PS[1] ; Addr[13] ; C25M ; C25M ; 40.000 ; 0.000 ; 9.830 ;
; 29.837 ; PS[1] ; Addr[14] ; C25M ; C25M ; 40.000 ; 0.000 ; 9.830 ;
; 29.837 ; PS[1] ; Addr[15] ; C25M ; C25M ; 40.000 ; 0.000 ; 9.830 ;
; 29.837 ; PS[1] ; Addr[8] ; C25M ; C25M ; 40.000 ; 0.000 ; 9.830 ;
; 29.837 ; PS[1] ; Addr[9] ; C25M ; C25M ; 40.000 ; 0.000 ; 9.830 ;
; 29.841 ; PS[0] ; SA[1]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.826 ;
; 29.878 ; IS.state_bit_1 ; SA[3]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.789 ;
; 29.892 ; PS[0] ; SA[5]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.775 ;
; 29.926 ; LS[6] ; IS.state_bit_0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.741 ;
; 29.942 ; LS[10] ; IS.state_bit_2 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.725 ;
; 30.003 ; IS.state_bit_0 ; SA[5]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.664 ;
; 30.027 ; PS[3] ; SA[8]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.640 ;
; 30.030 ; PS[3] ; SA[7]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.637 ;
; 30.058 ; LS[12] ; IS.state_bit_0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.609 ;
; 30.073 ; LS[7] ; IS.state_bit_1 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.594 ;
; 30.078 ; LS[3] ; IS.state_bit_1 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.589 ;
; 30.094 ; IS.state_bit_1 ; SA[8]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.573 ;
; 30.097 ; IS.state_bit_1 ; SA[7]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.570 ;
; 30.099 ; IS.state_bit_0 ; SA[1]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.568 ;
; 30.100 ; LS[1] ; IS.state_bit_0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.567 ;
; 30.101 ; LS[9] ; IS.state_bit_2 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.566 ;
; 30.102 ; PS[0] ; IS.state_bit_0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.565 ;
; 30.168 ; PS[0] ; SA[3]~reg0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.499 ;
; 30.226 ; PS[3] ; IS.state_bit_0 ; C25M ; C25M ; 40.000 ; 0.000 ; 9.441 ;
; 30.249 ; PS[1] ; Addr[0] ; C25M ; C25M ; 40.000 ; 0.000 ; 9.418 ;
+--------+----------------+----------------+--------------+-------------+--------------+------------+------------+
@ -276,106 +276,106 @@ This panel reports FMAX for every clock in the design, regardless of the user-sp
+-------+----------------+----------------+--------------+-------------+--------------+------------+------------+
; Slack ; From Node ; To Node ; Launch Clock ; Latch Clock ; Relationship ; Clock Skew ; Data Delay ;
+-------+----------------+----------------+--------------+-------------+--------------+------------+------------+
; 1.383 ; WRD[7] ; WRD[7] ; C25M ; C25M ; 0.000 ; 0.000 ; 1.604 ;
; 1.384 ; WRD[6] ; WRD[6] ; C25M ; C25M ; 0.000 ; 0.000 ; 1.605 ;
; 1.396 ; WRD[4] ; WRD[4] ; C25M ; C25M ; 0.000 ; 0.000 ; 1.617 ;
; 1.412 ; nRESf[1] ; nRESf[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 1.633 ;
; 1.422 ; nRESf[2] ; nRESf[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 1.643 ;
; 1.652 ; WRD[1] ; WRD[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 1.873 ;
; 1.654 ; nRESf[3] ; nRESr ; C25M ; C25M ; 0.000 ; 0.000 ; 1.875 ;
; 1.667 ; nRESout~reg0 ; nRESout~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 1.888 ;
; 1.667 ; REGEN ; REGEN ; C25M ; C25M ; 0.000 ; 0.000 ; 1.888 ;
; 1.779 ; PS[1] ; PS[1] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.000 ;
; 1.780 ; PS[1] ; nCAS~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.001 ;
; 1.785 ; PS[1] ; PS[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.006 ;
; 1.787 ; PS[1] ; PS[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.008 ;
; 1.825 ; nRESf[0] ; nRESf[1] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.046 ;
; 1.880 ; WRD[0] ; WRD[0] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.101 ;
; 1.920 ; Addr[7] ; AddrIncM ; C25M ; C25M ; 0.000 ; 0.000 ; 2.141 ;
; 1.937 ; RestoreDone ; RestoreDone ; C25M ; C25M ; 0.000 ; 0.000 ; 2.158 ;
; 1.942 ; nRESf[1] ; nRESr ; C25M ; C25M ; 0.000 ; 0.000 ; 2.163 ;
; 1.961 ; PS[0] ; PS[0] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.182 ;
; 1.978 ; IS.state_bit_1 ; IS.state_bit_0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.199 ;
; 1.996 ; LS[0] ; LS[0] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.217 ;
; 2.049 ; LS[13] ; LS[13] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.270 ;
; 2.108 ; Addr[15] ; Addr[15] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.329 ;
; 1.394 ; WRD[7] ; WRD[7] ; C25M ; C25M ; 0.000 ; 0.000 ; 1.615 ;
; 1.403 ; WRD[0] ; WRD[0] ; C25M ; C25M ; 0.000 ; 0.000 ; 1.624 ;
; 1.410 ; WRD[4] ; WRD[4] ; C25M ; C25M ; 0.000 ; 0.000 ; 1.631 ;
; 1.411 ; WRD[1] ; WRD[1] ; C25M ; C25M ; 0.000 ; 0.000 ; 1.632 ;
; 1.420 ; PHI0r1 ; PHI0r2 ; C25M ; C25M ; 0.000 ; 0.000 ; 1.641 ;
; 1.640 ; nRESout~reg0 ; nRESout~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 1.861 ;
; 1.695 ; REGEN ; REGEN ; C25M ; C25M ; 0.000 ; 0.000 ; 1.916 ;
; 1.815 ; WRD[3] ; WRD[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.036 ;
; 1.835 ; WRD[5] ; WRD[5] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.056 ;
; 1.927 ; IS.state_bit_1 ; IS.state_bit_0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.148 ;
; 1.937 ; PS[2] ; PS[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.158 ;
; 1.941 ; PHI0r1 ; PS[0] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.162 ;
; 1.972 ; LS[0] ; LS[0] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.193 ;
; 2.076 ; LS[13] ; LS[13] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.297 ;
; 2.107 ; LS[7] ; LS[7] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.328 ;
; 2.117 ; Addr[10] ; Addr[10] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.338 ;
; 2.117 ; Addr[7] ; Addr[7] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.338 ;
; 2.117 ; Addr[17] ; Addr[17] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.338 ;
; 2.117 ; Addr[18] ; Addr[18] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.338 ;
; 2.117 ; WRD[5] ; WRD[7] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.338 ;
; 2.117 ; Addr[9] ; Addr[9] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.338 ;
; 2.120 ; WRD[5] ; WRD[7] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.341 ;
; 2.122 ; WRD[3] ; WRD[5] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.343 ;
; 2.125 ; Addr[16] ; Addr[16] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.346 ;
; 2.125 ; Addr[8] ; Addr[8] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.346 ;
; 2.126 ; Addr[23] ; Addr[23] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.347 ;
; 2.126 ; Addr[10] ; Addr[10] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.347 ;
; 2.126 ; Addr[9] ; Addr[9] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.347 ;
; 2.128 ; LS[6] ; LS[6] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.349 ;
; 2.129 ; Addr[7] ; Addr[7] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.350 ;
; 2.133 ; LS[7] ; LS[7] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.354 ;
; 2.133 ; IS.state_bit_2 ; MOSIOE ; C25M ; C25M ; 0.000 ; 0.000 ; 2.354 ;
; 2.134 ; Addr[1] ; Addr[1] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.355 ;
; 2.136 ; IS.state_bit_2 ; nFCS~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.357 ;
; 2.143 ; LS[9] ; LS[9] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.364 ;
; 2.144 ; Addr[2] ; Addr[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.365 ;
; 2.126 ; Addr[1] ; Addr[1] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.347 ;
; 2.126 ; Addr[15] ; Addr[15] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.347 ;
; 2.126 ; LS[6] ; LS[6] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.347 ;
; 2.127 ; Addr[2] ; Addr[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.348 ;
; 2.136 ; IS.state_bit_0 ; IS.state_bit_0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.357 ;
; 2.144 ; LS[4] ; LS[4] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.365 ;
; 2.144 ; LS[8] ; LS[8] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.365 ;
; 2.148 ; RestoreDone ; Bank ; C25M ; C25M ; 0.000 ; 0.000 ; 2.369 ;
; 2.199 ; IS.state_bit_0 ; IS.state_bit_0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.420 ;
; 2.203 ; PS[2] ; PS[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.424 ;
; 2.210 ; PS[2] ; MOSIout ; C25M ; C25M ; 0.000 ; 0.000 ; 2.431 ;
; 2.212 ; Addr[11] ; Addr[11] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.433 ;
; 2.212 ; Addr[3] ; Addr[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.433 ;
; 2.212 ; LS[5] ; LS[5] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.433 ;
; 2.213 ; PS[2] ; PS[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.434 ;
; 2.214 ; IS.state_bit_0 ; nRESout~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.435 ;
; 2.221 ; Bank ; Bank ; C25M ; C25M ; 0.000 ; 0.000 ; 2.442 ;
; 2.221 ; Addr[13] ; Addr[13] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.442 ;
; 2.221 ; Addr[5] ; Addr[5] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.442 ;
; 2.222 ; PS[2] ; nCAS~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.443 ;
; 2.222 ; Addr[14] ; Addr[14] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.443 ;
; 2.222 ; Addr[6] ; Addr[6] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.443 ;
; 2.230 ; LS[12] ; LS[12] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.451 ;
; 2.144 ; LS[9] ; LS[9] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.365 ;
; 2.147 ; WRD[1] ; WRD[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.368 ;
; 2.153 ; WRD[4] ; WRD[6] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.374 ;
; 2.170 ; REGEN ; AddrIncL ; C25M ; C25M ; 0.000 ; 0.000 ; 2.391 ;
; 2.222 ; Bank ; Bank ; C25M ; C25M ; 0.000 ; 0.000 ; 2.443 ;
; 2.230 ; Addr[21] ; Addr[21] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.451 ;
; 2.231 ; Addr[19] ; Addr[19] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.452 ;
; 2.231 ; Addr[20] ; Addr[20] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.452 ;
; 2.231 ; IOROMEN ; IOROMEN ; C25M ; C25M ; 0.000 ; 0.000 ; 2.452 ;
; 2.231 ; Addr[22] ; Addr[22] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.452 ;
; 2.234 ; WRD[4] ; WRD[6] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.455 ;
; 2.237 ; AddrIncH ; Addr[16] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.458 ;
; 2.239 ; LS[2] ; LS[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.460 ;
; 2.240 ; LS[1] ; LS[1] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.461 ;
; 2.241 ; LS[10] ; LS[10] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.462 ;
; 2.241 ; LS[11] ; LS[11] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.462 ;
; 2.251 ; LS[3] ; LS[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.472 ;
; 2.253 ; nRESf[2] ; nRESr ; C25M ; C25M ; 0.000 ; 0.000 ; 2.474 ;
; 2.262 ; IOROMEN ; IOROMEN ; C25M ; C25M ; 0.000 ; 0.000 ; 2.483 ;
; 2.276 ; PS[3] ; PS[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.497 ;
; 2.283 ; PS[3] ; nCAS~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.504 ;
; 2.290 ; WRD[2] ; WRD[4] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.511 ;
; 2.291 ; IS.state_bit_1 ; nRESout~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.512 ;
; 2.313 ; WRD[5] ; WRD[5] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.534 ;
; 2.364 ; PS[1] ; MOSIout ; C25M ; C25M ; 0.000 ; 0.000 ; 2.585 ;
; 2.370 ; WRD[1] ; WRD[1] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.591 ;
; 2.448 ; WRD[3] ; WRD[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.669 ;
; 2.508 ; Addr[12] ; Addr[12] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.729 ;
; 2.542 ; Addr[4] ; Addr[4] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.763 ;
; 2.547 ; LS[4] ; SA[3]~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.768 ;
; 2.554 ; WRD[2] ; WRD[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.775 ;
; 2.557 ; nRESf[0] ; nRESr ; C25M ; C25M ; 0.000 ; 0.000 ; 2.778 ;
; 2.582 ; PS[3] ; nRCS~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.803 ;
; 2.595 ; Addr[0] ; Addr[0] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.816 ;
; 2.638 ; PHI0r1 ; PHI0r2 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.859 ;
; 2.652 ; IS.state_bit_0 ; MOSIOE ; C25M ; C25M ; 0.000 ; 0.000 ; 2.873 ;
; 2.655 ; IS.state_bit_0 ; nFCS~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.876 ;
; 2.656 ; PHI0r2 ; RCKE~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.877 ;
; 2.676 ; PS[2] ; nRCS~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.897 ;
; 2.719 ; LS[7] ; SA[6]~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.940 ;
; 2.720 ; WRD[0] ; WRD[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.941 ;
; 2.838 ; IS.state_bit_1 ; nFCS~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 3.059 ;
; 2.848 ; IS.state_bit_1 ; MOSIOE ; C25M ; C25M ; 0.000 ; 0.000 ; 3.069 ;
; 2.928 ; Addr[14] ; SA[4]~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 3.149 ;
; 2.231 ; Addr[20] ; Addr[20] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.452 ;
; 2.234 ; RCKE~reg0 ; RCKE~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.455 ;
; 2.241 ; Addr[11] ; Addr[11] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.462 ;
; 2.241 ; Addr[3] ; Addr[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.462 ;
; 2.246 ; AddrIncH ; Addr[16] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.467 ;
; 2.248 ; LS[12] ; LS[12] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.469 ;
; 2.249 ; Addr[6] ; Addr[6] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.470 ;
; 2.249 ; WRD[0] ; WRD[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.470 ;
; 2.250 ; LS[1] ; LS[1] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.471 ;
; 2.250 ; LS[11] ; LS[11] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.471 ;
; 2.250 ; Addr[13] ; Addr[13] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.471 ;
; 2.250 ; Addr[14] ; Addr[14] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.471 ;
; 2.251 ; LS[5] ; LS[5] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.472 ;
; 2.251 ; Addr[19] ; Addr[19] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.472 ;
; 2.253 ; LS[10] ; LS[10] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.474 ;
; 2.254 ; PHI0r2 ; PS[0] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.475 ;
; 2.254 ; Addr[19] ; SA[9]~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.475 ;
; 2.261 ; LS[2] ; LS[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.482 ;
; 2.261 ; Addr[4] ; Addr[4] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.482 ;
; 2.261 ; Addr[5] ; Addr[5] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.482 ;
; 2.262 ; LS[3] ; LS[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.483 ;
; 2.428 ; WRD[2] ; WRD[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.649 ;
; 2.500 ; Addr[7] ; AddrIncM ; C25M ; C25M ; 0.000 ; 0.000 ; 2.721 ;
; 2.548 ; WRD[6] ; WRD[6] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.769 ;
; 2.558 ; Addr[12] ; Addr[12] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.779 ;
; 2.569 ; IS.state_bit_0 ; nRESout~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.790 ;
; 2.574 ; IS.state_bit_0 ; FCS ; C25M ; C25M ; 0.000 ; 0.000 ; 2.795 ;
; 2.584 ; IS.state_bit_0 ; FCKOE ; C25M ; C25M ; 0.000 ; 0.000 ; 2.805 ;
; 2.622 ; PS[0] ; PS[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.843 ;
; 2.702 ; IS.state_bit_1 ; FCKOE ; C25M ; C25M ; 0.000 ; 0.000 ; 2.923 ;
; 2.717 ; PS[0] ; PS[0] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.938 ;
; 2.718 ; IS.state_bit_1 ; FCS ; C25M ; C25M ; 0.000 ; 0.000 ; 2.939 ;
; 2.719 ; PS[0] ; PS[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 2.940 ;
; 2.721 ; IS.state_bit_1 ; nRESout~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 2.942 ;
; 2.782 ; IS.state_bit_0 ; MOSIOE ; C25M ; C25M ; 0.000 ; 0.000 ; 3.003 ;
; 2.849 ; IS.state_bit_2 ; IS.state_bit_2 ; C25M ; C25M ; 0.000 ; 0.000 ; 3.070 ;
; 2.939 ; LS[7] ; LS[8] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.160 ;
; 2.949 ; Addr[9] ; Addr[10] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.170 ;
; 2.949 ; Addr[10] ; Addr[11] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.170 ;
; 2.949 ; Addr[17] ; Addr[18] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.170 ;
; 2.949 ; Addr[18] ; Addr[19] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.170 ;
; 2.954 ; PS[2] ; PS[0] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.175 ;
; 2.955 ; IS.state_bit_2 ; FCKOE ; C25M ; C25M ; 0.000 ; 0.000 ; 3.176 ;
; 2.956 ; PS[1] ; nRAS~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 3.177 ;
; 2.957 ; Addr[16] ; Addr[17] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.178 ;
; 2.958 ; Addr[9] ; Addr[10] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.179 ;
; 2.958 ; Addr[10] ; Addr[11] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.179 ;
; 2.965 ; LS[7] ; LS[8] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.186 ;
; 2.957 ; Addr[8] ; Addr[9] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.178 ;
; 2.957 ; IS.state_bit_2 ; FCS ; C25M ; C25M ; 0.000 ; 0.000 ; 3.178 ;
; 2.958 ; PS[1] ; nCAS~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 3.179 ;
; 2.958 ; Addr[1] ; Addr[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.179 ;
; 2.959 ; Addr[2] ; Addr[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.180 ;
; 2.976 ; LS[9] ; LS[10] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.197 ;
; 2.976 ; LS[4] ; LS[5] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.197 ;
; 2.976 ; LS[8] ; LS[9] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.197 ;
; 2.985 ; PS[1] ; PS[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.206 ;
; 3.037 ; Addr[0] ; DQMH~reg0 ; C25M ; C25M ; 0.000 ; 0.000 ; 3.258 ;
; 3.050 ; LS[7] ; LS[9] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.271 ;
; 3.060 ; Addr[10] ; Addr[12] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.281 ;
; 3.060 ; Addr[18] ; Addr[20] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.281 ;
; 3.060 ; Addr[9] ; Addr[11] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.281 ;
; 3.060 ; Addr[17] ; Addr[19] ; C25M ; C25M ; 0.000 ; 0.000 ; 3.281 ;
+-------+----------------+----------------+--------------+-------------+--------------+------------+------------+
@ -384,35 +384,35 @@ This panel reports FMAX for every clock in the design, regardless of the user-sp
+--------+-----------+----------+--------------+-------------+--------------+------------+------------+
; Slack ; From Node ; To Node ; Launch Clock ; Latch Clock ; Relationship ; Clock Skew ; Data Delay ;
+--------+-----------+----------+--------------+-------------+--------------+------------+------------+
; 33.331 ; nRESr ; Addr[23] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[0] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; REGEN ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[10] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[1] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[11] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[2] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[12] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Bank ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[3] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[13] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[4] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[14] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[5] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[15] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[6] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[16] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[7] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[17] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[8] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[18] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[9] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[19] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[20] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[21] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; Addr[22] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; AddrIncH ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; AddrIncM ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.331 ; nRESr ; AddrIncL ; C25M ; C25M ; 40.000 ; 0.000 ; 6.336 ;
; 33.179 ; nRESr ; Addr[23] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[0] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; REGEN ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[22] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[10] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[1] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[11] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[2] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[12] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Bank ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[3] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[13] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[4] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[14] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[5] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[15] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[6] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[16] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[7] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[17] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[8] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[18] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[9] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[19] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[20] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; Addr[21] ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; AddrIncH ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; AddrIncM ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
; 33.179 ; nRESr ; AddrIncL ; C25M ; C25M ; 40.000 ; 0.000 ; 6.488 ;
+--------+-----------+----------+--------------+-------------+--------------+------------+------------+
@ -421,57 +421,57 @@ This panel reports FMAX for every clock in the design, regardless of the user-sp
+-------+-----------+----------+--------------+-------------+--------------+------------+------------+
; Slack ; From Node ; To Node ; Launch Clock ; Latch Clock ; Relationship ; Clock Skew ; Data Delay ;
+-------+-----------+----------+--------------+-------------+--------------+------------+------------+
; 6.115 ; nRESr ; Addr[23] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[0] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; REGEN ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[10] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[1] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[11] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[12] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Bank ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[13] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[4] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[14] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[5] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[15] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[6] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[16] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[7] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[17] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[8] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[18] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[9] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[19] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[20] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[21] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; Addr[22] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; AddrIncH ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; AddrIncM ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.115 ; nRESr ; AddrIncL ; C25M ; C25M ; 0.000 ; 0.000 ; 6.336 ;
; 6.267 ; nRESr ; Addr[23] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[0] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; REGEN ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[22] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[10] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[1] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[11] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[2] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[12] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Bank ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[3] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[13] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[4] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[14] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[5] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[15] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[6] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[16] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[7] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[17] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[8] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[18] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[9] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[19] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[20] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; Addr[21] ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; AddrIncH ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; AddrIncM ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
; 6.267 ; nRESr ; AddrIncL ; C25M ; C25M ; 0.000 ; 0.000 ; 6.488 ;
+-------+-----------+----------+--------------+-------------+--------------+------------+------------+
+-------------------------------------------------------------------------+
; Setup Transfers ;
+------------+----------+------------+------------+------------+----------+
; From Clock ; To Clock ; RR Paths ; FR Paths ; RF Paths ; FF Paths ;
+------------+----------+------------+------------+------------+----------+
; C25M ; C25M ; 1405 ; 0 ; 95 ; 0 ;
; PHI0 ; C25M ; false path ; false path ; false path ; 0 ;
+------------+----------+------------+------------+------------+----------+
+-----------------------------------------------------------------------+
; Setup Transfers ;
+------------+----------+------------+------------+----------+----------+
; From Clock ; To Clock ; RR Paths ; FR Paths ; RF Paths ; FF Paths ;
+------------+----------+------------+------------+----------+----------+
; C25M ; C25M ; 1285 ; 0 ; 56 ; 0 ;
; PHI0 ; C25M ; false path ; false path ; 0 ; 0 ;
+------------+----------+------------+------------+----------+----------+
Entries labeled "false path" only account for clock-to-clock false paths and not path-based false paths. As a result, actual path counts may be lower than reported.
+-------------------------------------------------------------------------+
; Hold Transfers ;
+------------+----------+------------+------------+------------+----------+
; From Clock ; To Clock ; RR Paths ; FR Paths ; RF Paths ; FF Paths ;
+------------+----------+------------+------------+------------+----------+
; C25M ; C25M ; 1405 ; 0 ; 95 ; 0 ;
; PHI0 ; C25M ; false path ; false path ; false path ; 0 ;
+------------+----------+------------+------------+------------+----------+
+-----------------------------------------------------------------------+
; Hold Transfers ;
+------------+----------+------------+------------+----------+----------+
; From Clock ; To Clock ; RR Paths ; FR Paths ; RF Paths ; FF Paths ;
+------------+----------+------------+------------+----------+----------+
; C25M ; C25M ; 1285 ; 0 ; 56 ; 0 ;
; PHI0 ; C25M ; false path ; false path ; 0 ; 0 ;
+------------+----------+------------+------------+----------+----------+
Entries labeled "false path" only account for clock-to-clock false paths and not path-based false paths. As a result, actual path counts may be lower than reported.
@ -514,10 +514,10 @@ No non-DPA dedicated SERDES Receiver circuitry present in device or used in desi
+---------------------------------+-------+------+
; Illegal Clocks ; 0 ; 0 ;
; Unconstrained Clocks ; 0 ; 0 ;
; Unconstrained Input Ports ; 42 ; 42 ;
; Unconstrained Input Port Paths ; 251 ; 251 ;
; Unconstrained Output Ports ; 44 ; 44 ;
; Unconstrained Output Port Paths ; 214 ; 214 ;
; Unconstrained Input Ports ; 44 ; 44 ;
; Unconstrained Input Port Paths ; 390 ; 390 ;
; Unconstrained Output Ports ; 45 ; 45 ;
; Unconstrained Output Port Paths ; 136 ; 136 ;
+---------------------------------+-------+------+
@ -573,6 +573,8 @@ No non-DPA dedicated SERDES Receiver circuitry present in device or used in desi
; SD[5] ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SD[6] ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SD[7] ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SetFW[0] ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SetFW[1] ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
; nDEVSEL ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
; nIOSEL ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
; nIOSTRB ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
@ -615,6 +617,7 @@ No non-DPA dedicated SERDES Receiver circuitry present in device or used in desi
; SA[10] ; No output delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SA[11] ; No output delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SA[12] ; No output delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SBA[0] ; No output delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SBA[1] ; No output delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SD[0] ; No output delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SD[1] ; No output delay, min/max delays, false-path exceptions, or max skew assignments found ;
@ -675,6 +678,8 @@ No non-DPA dedicated SERDES Receiver circuitry present in device or used in desi
; SD[5] ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SD[6] ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SD[7] ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SetFW[0] ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SetFW[1] ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
; nDEVSEL ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
; nIOSEL ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
; nIOSTRB ; No input delay, min/max delays, false-path exceptions, or max skew assignments found ;
@ -717,6 +722,7 @@ No non-DPA dedicated SERDES Receiver circuitry present in device or used in desi
; SA[10] ; No output delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SA[11] ; No output delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SA[12] ; No output delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SBA[0] ; No output delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SBA[1] ; No output delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SD[0] ; No output delay, min/max delays, false-path exceptions, or max skew assignments found ;
; SD[1] ; No output delay, min/max delays, false-path exceptions, or max skew assignments found ;
@ -741,7 +747,7 @@ No non-DPA dedicated SERDES Receiver circuitry present in device or used in desi
Info: *******************************************************************
Info: Running Quartus Prime Timing Analyzer
Info: Version 19.1.0 Build 670 09/22/2019 SJ Lite Edition
Info: Processing started: Tue Mar 28 05:06:38 2023
Info: Processing started: Fri Apr 14 00:01:41 2023
Info: Command: quartus_sta GR8RAM -c GR8RAM
Info: qsta_default_script.tcl version: #1
Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance.
@ -753,22 +759,22 @@ Info (334004): Delay annotation completed successfully
Info (332104): Reading SDC File: 'GR8RAM.sdc'
Info: Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON
Info: Can't run Report Timing Closure Recommendations. The current device family is not supported.
Info (332146): Worst-case setup slack is 12.472
Info (332146): Worst-case setup slack is 14.252
Info (332119): Slack End Point TNS Clock
Info (332119): ========= =================== =====================
Info (332119): 12.472 0.000 C25M
Info (332146): Worst-case hold slack is 1.383
Info (332119): 14.252 0.000 C25M
Info (332146): Worst-case hold slack is 1.394
Info (332119): Slack End Point TNS Clock
Info (332119): ========= =================== =====================
Info (332119): 1.383 0.000 C25M
Info (332146): Worst-case recovery slack is 33.331
Info (332119): 1.394 0.000 C25M
Info (332146): Worst-case recovery slack is 33.179
Info (332119): Slack End Point TNS Clock
Info (332119): ========= =================== =====================
Info (332119): 33.331 0.000 C25M
Info (332146): Worst-case removal slack is 6.115
Info (332119): 33.179 0.000 C25M
Info (332146): Worst-case removal slack is 6.267
Info (332119): Slack End Point TNS Clock
Info (332119): ========= =================== =====================
Info (332119): 6.115 0.000 C25M
Info (332119): 6.267 0.000 C25M
Info (332146): Worst-case minimum pulse width slack is 19.734
Info (332119): Slack End Point TNS Clock
Info (332119): ========= =================== =====================
@ -778,9 +784,9 @@ Info (332001): The selected device family is not supported by the report_metasta
Info (332102): Design is not fully constrained for setup requirements
Info (332102): Design is not fully constrained for hold requirements
Info: Quartus Prime Timing Analyzer was successful. 0 errors, 1 warning
Info: Peak virtual memory: 13052 megabytes
Info: Processing ended: Tue Mar 28 05:06:39 2023
Info: Elapsed time: 00:00:01
Info: Peak virtual memory: 13051 megabytes
Info: Processing ended: Fri Apr 14 00:01:43 2023
Info: Elapsed time: 00:00:02
Info: Total CPU time (on all processors): 00:00:01

8
cpld/output_files/GR8RAM.sta.summary
View File

@ -3,19 +3,19 @@ Timing Analyzer Summary
------------------------------------------------------------
Type : Setup 'C25M'
Slack : 12.472
Slack : 14.252
TNS : 0.000
Type : Hold 'C25M'
Slack : 1.383
Slack : 1.394
TNS : 0.000
Type : Recovery 'C25M'
Slack : 33.331
Slack : 33.179
TNS : 0.000
Type : Removal 'C25M'
Slack : 6.115
Slack : 6.267
TNS : 0.000
Type : Minimum Pulse Width 'C25M'