mirror of
https://github.com/TomNisbet/TommyPROM.git
synced 2025-02-19 14:31:06 +00:00
36 lines
1.3 KiB
Markdown
36 lines
1.3 KiB
Markdown
---
|
|
title: PCB
|
|
description: "TommyPROM Arduino 28C256 programmer PCB"
|
|
has_children: false
|
|
nav_order: 35
|
|
---
|
|
|
|
# Printed Circuit Board
|
|
|
|
Although it was originally designed as a one-off programmer to be used on a breadboard,
|
|
there are now some PCB versions.
|
|
|
|
## 28C256 PCB
|
|
|
|
I built a PCB version for the 28C256 and 28C64 chips because so many burns of these were
|
|
needed for a SAP-1 TTL breadboard computer. The PCB version with the ZIF socket was much
|
|
easier to work with, compared to prying the chips out of a breadboard without disturbing
|
|
any of the wires.
|
|
|
|
The [KiCad design files](https://github.com/TomNisbet/TommyPROM/tree/master/schematics)
|
|
are in the project repo.
|
|
|
|
[](images/TommyPROM-pcb.jpg)
|
|
|
|
## TommyPROM-32
|
|
|
|
A new PCB is in progress for 32-pin EEPROM and Flash chips. This design uses a set of
|
|
headers that allow any of the signals to the target chip to be re-routed. The default
|
|
configuration, with just jumper shunts installed, is wired for the SST39SF0x0 chips.
|
|
|
|
Many other chips, particularly if they follow JEDEC standards, can be supported be adding
|
|
just a few jumpers.
|
|
|
|
Chips with few pins can also be supported. There are power pins in place to support
|
|
28-pin and 24-pin chips with a shunt to the correct VCC pin.
|