mirror of
https://github.com/TomNisbet/TommyPROM.git
synced 2024-11-26 06:49:16 +00:00
48 lines
2.2 KiB
Markdown
48 lines
2.2 KiB
Markdown
---
|
|
title: "Getting Started"
|
|
permalink: /docs/getting-started
|
|
exerpt: "Introduction to the operation of TommyPROM"
|
|
---
|
|
|
|
|
|
|
|
To use the programmer, connect the Arduino USB to the host computer and run a terminal
|
|
program, such as TeraTerm (Windows) or Minicom (Linux). The Arduino development Serial
|
|
Monitor can also be used as a terminal initially, but it does not support XMODEM
|
|
transfers, so the READ and WRITE commands can't be used.
|
|
|
|
Disable both hardware and software flow control in the minicom settings for best results.
|
|
|
|
Set the terminal's serial parameters to 115200 baud, 8 bits, no parity, 1 stop bit to
|
|
match the Arduino. Press the Enter key. If the connection is successful, TommyPROM will
|
|
display a menu of options.
|
|
|
|
Most of the commands take a start address parameter, always entered as 1 to 5 hex
|
|
characters. Leading zeros are not required. If needed, the end address parameter is also
|
|
in hex. Parameters are separated by a space. For example, either of the commands:
|
|
|
|
d0000 01ff
|
|
d0 1ff
|
|
|
|
will dump memory from 0000H to 01ffH. Note that commands and parameters can be entered in
|
|
uppercase or lowercase.
|
|
|
|
The R command is used to read from a PROM and save a binary image on the host. The W
|
|
command receives a file from the host and writes (burns) it into the device. The R
|
|
command needs a start and end address. The W command determines the end address from the
|
|
received file size.
|
|
|
|
Once the READ or WRITE command is issued to the programmer, the transfer must
|
|
be started on the host program.
|
|
|
|
Note that previous versions of TommyPROM used the XMODEM-CRC protocol to complete the file
|
|
transfers for the READ and WRITE commands. This did not work well with minicom and other
|
|
Linux programs that rely on the sz/rz commands. Versions 2.5 and later of TommyPROM now
|
|
use basic XModem with the 8-bit checksum. The XModem-CRC support is still available as a
|
|
compile-time option. See [issue #19](https://github.com/TomNisbet/TommyPROM/issues/19)
|
|
for details.
|
|
|
|
The files used for READ and WRITE are simple binary images. This can be created directly
|
|
by [asm85](http://github.com/TomNisbet/asm85) or can be converted from S-record or Intel
|
|
HEX using an external utility.
|