updated readme.md - fixed typos
This commit is contained in:
parent
ebea9e87c6
commit
2824eebfbc
18
README.md
18
README.md
|
@ -79,7 +79,7 @@ Setup:
|
||||||
</pre>
|
</pre>
|
||||||
|
|
||||||
* Erase the GAL chip. Before writing / programming the chip it must
|
* Erase the GAL chip. Before writing / programming the chip it must
|
||||||
be erased - even if it is a branch new chip that has not been used
|
be erased - even if it is a brand new chip that has not been used
|
||||||
before. Use the following command:
|
before. Use the following command:
|
||||||
<pre>
|
<pre>
|
||||||
./afterburner e -t [GAL type]
|
./afterburner e -t [GAL type]
|
||||||
|
@ -92,24 +92,24 @@ Setup:
|
||||||
|
|
||||||
How aferburner works:
|
How aferburner works:
|
||||||
---------------------
|
---------------------
|
||||||
* PC code reads and parses .jad files, then produces a binary which
|
- PC code reads and parses .jad files, then produces a binary which
|
||||||
can be the uploaded to Arduino via serial port. By default
|
can be then uploaded to Arduino via serial port. By default
|
||||||
/dev/ttyUSB0 is used, but that can be changed to any other device
|
/dev/ttyUSB0 is used, but that can be changed to any other device
|
||||||
by passing the following option to afterburner:
|
by passing the following option to afterburner:
|
||||||
<pre>
|
<pre>
|
||||||
-d /my/serial/device
|
-d /my/serial/device
|
||||||
</pre>
|
</pre>
|
||||||
|
|
||||||
* PC code of afterburner communicates with Arduino UNO's afterburner
|
- PC code of afterburner communicates with Arduino UNO's afterburner
|
||||||
sketch by a trivial text based protocol. You can also connect directly
|
sketch by a trivial text based protocol. You can also connect directly
|
||||||
to Arduino UNO via serial terminal of your choice and issue some basic
|
to Arduino UNO via serial terminal of your choice and issue some basic
|
||||||
commands manually.
|
commands manually.
|
||||||
|
|
||||||
* Arduino UNO's afterburner sketch does 2 things:
|
- Arduino UNO's afterburner sketch does 2 things:
|
||||||
1) parses commands and data sent from the PC afterburner code
|
* parses commands and data sent from the PC afterburner code
|
||||||
2) toggles the GPIO pins and drives programming of the GAL content
|
* toggles the GPIO pins and drives programming of the GAL content
|
||||||
|
|
||||||
* more information about GAL chips and their programming can be found here:
|
- more information about GAL chips and their programming can be found here:
|
||||||
|
|
||||||
http://www.bhabbott.net.nz/atfblast.html
|
http://www.bhabbott.net.nz/atfblast.html
|
||||||
|
|
||||||
|
@ -187,7 +187,6 @@ Troubleshooting:
|
||||||
* this happens for example on ATF devices when VPP is set to 12V. ATF should use VPP
|
* this happens for example on ATF devices when VPP is set to 12V. ATF should use VPP
|
||||||
set to 10V when programmed by Afterburner.
|
set to 10V when programmed by Afterburner.
|
||||||
|
|
||||||
|
|
||||||
- afterburner reports it can not connect to /dev/ttyUSB0, permission denied
|
- afterburner reports it can not connect to /dev/ttyUSB0, permission denied
|
||||||
|
|
||||||
* ensure your user is member of the of the dialup group or alernatively run
|
* ensure your user is member of the of the dialup group or alernatively run
|
||||||
|
@ -253,6 +252,7 @@ Troubleshooting:
|
||||||
* the same way as on Linux: compile the source code
|
* the same way as on Linux: compile the source code
|
||||||
* OR use pre-compiled afterburner binaries located in 'releases' directory
|
* OR use pre-compiled afterburner binaries located in 'releases' directory
|
||||||
* then run afterburner in terminal (use 'cmd' on WinXX) as described above
|
* then run afterburner in terminal (use 'cmd' on WinXX) as described above
|
||||||
|
* ensure your serial device name is passed via '-d' option. For example -d COM5 on WinXX
|
||||||
|
|
||||||
- what are the .jed files and how to produce them
|
- what are the .jed files and how to produce them
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue