ole00
29df84d42e
PC APP: released updated app with ATF150X support
2024-04-13 00:06:13 +01:00
ole00
e745ae9919
Image: added ATF150X adapter image
2024-04-13 00:02:44 +01:00
ole00
6230e7c55e
PCB: updated ATF150X adapter
...
Previously the TDO pull-up was not properly connected
to VCC. The Rev.2 adapter can still be used, either
without the pull-up or with a small mod-wire to
connect the pull-up with the VCC."
2024-04-13 00:02:44 +01:00
ole00
18b3cea6a2
added JTAG utils for .jed to .xsvf conversion
2024-04-13 00:02:39 +01:00
ole00
7d20d778c6
jtag player: implement XWAITSTATE and XTRST
...
These new instructions are used by svf2xsvf OpenOCD tool.
2024-04-12 22:41:59 +01:00
ole00
fb22c14e9f
jtag player: reduce serial buffer size to 62 bytes
...
Values bigger than 63 bytes seem to cause issue on AVR MCUs.
2024-04-12 22:41:49 +01:00
ole00
316d103456
PC app: JTAG player - decrease initial over-buffering
...
This change improves XSVF upload reliability.
2024-04-12 22:41:42 +01:00
ole00
cce891c513
PC app: play JTAG file: improved progress bar updates
...
When the chunk sizes were not power of 2 the progress bar
updates were irregular. This change ensures that any
upload progress is regularly updated."
2024-04-12 22:41:33 +01:00
ole00
ad9308e291
PC app: print file size of JED or XSVF in verbose mode
2024-04-12 22:41:19 +01:00
ole00
32468f6dd8
jtag: optimise memory usage
2024-04-09 21:07:33 +01:00
ole00
2b83233399
jtag: removed initialisation within the struct
2024-04-09 21:04:05 +01:00
ole00
56b687017a
PC app: close serial port at the end of xsvf playback
2024-04-04 23:33:28 +01:00
ole00
c205579e9b
Gerbers: added ATF150xAS and ATF150xASL adapter
2024-04-03 22:16:46 +01:00
ole00
7a3981a9b3
PCB: added ATF150xAS and ATF150xASL adapter
2024-04-03 22:16:46 +01:00
ole00
54600a153a
XSVF: added xsvf files for ATF150X id and erase
2024-04-03 22:16:46 +01:00
ole00
a8ecb518cf
PC APP: released updated app with ATF150X support
2024-04-03 22:16:46 +01:00
ole00
eac70f6c68
PC app: serial - add support for NO_CLOSE on Windows
2024-04-03 22:16:46 +01:00
ole00
0367a8b127
sketch: added JTAG XSVF player
2024-04-03 22:16:46 +01:00
ole00
718a908a9d
sketch: improve pinmuxing when inactive
...
Previously unused pins were always set as output low.
Now, they are output low when active operation is in
progress, and they are set as input when inactive.
2024-04-03 22:16:46 +01:00
ole00
0e99f07370
PC app: added support for JTAG and ATF1502 and ATF1504
2024-04-03 22:16:46 +01:00
ole00
5621df2f1f
PC app: format the list of GAL names
...
Up to 8 GAL names on the same line.
2024-04-03 22:16:46 +01:00
ole00
b733cd5e6a
PC app: added progress bar update function
2024-04-03 22:16:46 +01:00
ole00
0761907067
PC App: fixed help text: serial port information
2024-04-03 21:43:32 +01:00
ole00
a3968f5c00
PC app release v.0.5.8 - updated
2024-03-23 16:20:30 +00:00
ole00
3b4921daa2
build script for OSX: compile with preprocessor _OSX_
...
The preprocessor symbol helps to distinguish the serial port
detection rule (OSX/Linux).
2024-03-23 16:16:46 +00:00
ole00
4238800190
PC App: guesses the serial port device name
...
When the serial device name is not passed with paramerer -d
then the PC app will try to find an existing serial device.
* On Windows: selects the COM device with the highest number.
* On Linux: selects the serial usb device in any order, but
priority is given to devices with Arduino name.
* ON MAC OS: selects the last /dev/tty.* or /dev/tty/wchusb*
device in the order that OS lists them.
This serial port detection should work OK if you have only one
Arduino attached. If you have (and need to have) several
Arduinos or serial ports connected at the same time then pass
the '-d' parameter to specify which one to use.
2024-03-23 16:08:29 +00:00
ole00
e9aaf41c48
PC app release v.0.5.8 - updated
2024-03-23 11:04:36 +00:00
ole00
a48de726bf
PC app: fix progress bar compatibility
...
The proress bar cusros hiding/revealing sequence was not
compatible with some Windows versions / shells.
This fix removes the escaped sequences and ensures the progress
bar is fully printed at the end of each iteration, which prevents
the visual artefacts caused by the jumping cursor.
2024-03-23 11:01:00 +00:00
ole00
1589119e7c
sketch: setPinMux: unset internal pull-up on DOUT when inactive
...
See issue #61
2024-03-22 07:14:51 +00:00
ole00
37f93be2d3
PC app release v.0.5.8 - updated
2024-03-19 21:05:47 +00:00
ole00
757e13e55f
build scripts: pass git commit hash as preprocessor symbol
2024-03-19 21:05:47 +00:00
ole00
52466f64c6
PC app: added git commit to version info
2024-03-19 21:05:47 +00:00
ole00
a9bf98b719
Sketch: reduced duration on VPP ramp-up
...
The VPP ramp-up was too long after the change of the calibration
scale in recent commits.
2024-03-19 21:05:32 +00:00
ole00
dabfcf5aad
PC app: increase maximum time to wait for VPP measurement
2024-03-19 20:43:23 +00:00
ole00
79e33ab2a5
PC app: fix serial port read buffer overflow
...
Overflow happened when verbose printouts were enabled
in the Arduino sketch.
2024-03-19 20:41:43 +00:00
ole00
2754ff5c47
PC app: fixed typos in help text
2024-03-19 18:58:25 +00:00
ole00
49342b2174
README.md updated info about tap indices during calibration
...
The latest calibration indices are 2x higher than in previous version.
2024-03-18 20:23:50 +00:00
ole00
e6d9a6ea2e
README.md: re-calibration needed for ver. 0.5.8
2024-03-17 21:32:57 +00:00
ole00
941142df71
PC app release v.0.5.8
2024-03-17 21:24:54 +00:00
ole00
733ea3c8e3
version increased to v.0.5.8
2024-03-17 21:15:05 +00:00
ole00
3ee0147d88
sketch: improved calibration, mcp4151 uses full tap scale
...
This change stores the digi pot indices in the scale 1-255
(previously 1 -128) so the stored values for calibration
are no longer valid after this change is uploaded to Arduino.
Please re-run the full calibration on your Afterburner!
2024-03-17 21:15:05 +00:00
ole00
103a99ab7a
pc app: calibration takes longer time, wait longer
...
This is because the voltage settle time delay was increased
and also now 255 taps are scanned.
2024-03-17 21:15:05 +00:00
ole00
460d0f2caa
improve calibration offset resolution and range
...
range: -0.32V to +0.32V
steps: by 0.01V
2024-03-17 21:14:52 +00:00
ole00
a559e10612
mt3608 wire: added resistance test indicators
2024-03-16 11:06:09 +00:00
ole00
e5ffe7ec19
README.md - added safety step when installing the pot wire
2024-03-16 11:01:23 +00:00
ole00
6b6bbd76e2
Update README.md - ATF750C is now supported
...
AFT750C support ported over from Michael D. afterburner's fork.
2024-02-16 20:06:48 +00:00
ole00
0b865d4892
PC app release v.0.5.7
2024-02-16 19:57:43 +00:00
ole00
cc64a29953
version increased to 0.5.7
2024-02-16 19:55:41 +00:00
ole00
7ef0038209
sketch: ensure sparse fusemap is enabled only for ATF750C
2024-02-16 19:44:52 +00:00
ole00
5f2105680f
PC app: increase maximum wait time for operations
...
This fixes reading erased ATF750C when using sparse fusemap.
2024-02-16 19:44:52 +00:00
