ole00
90f107f33e
bom.txt : updated for PCB 3.0
2023-04-07 20:08:14 +01:00
ole00
9bc3c889a2
README.md fixed typos
2023-04-07 19:29:16 +01:00
ole00
c16e145f83
updated .gitignore
2023-04-07 19:17:20 +01:00
ole00
1fa2d8c5fd
PC app releases version 0.5.1
2023-04-07 19:17:20 +01:00
ole00
cff8fb40a7
PC app compilation scripts: use NO_CLOSE
...
Force serial port not to be closed.
2023-04-07 19:17:20 +01:00
ole00
4d98e66cbc
removed win32 compilaton script: obsolete target
2023-04-07 19:17:20 +01:00
ole00
fae2d96e7e
removed old releases
2023-04-07 19:17:20 +01:00
ole00
4bb44e8ac3
removed case - needs a redesign to fit the new board
2023-04-07 19:17:20 +01:00
ole00
70c29929ce
README.md - new design info
2023-04-07 19:17:18 +01:00
ole00
97f8ece5af
added new design pcb
2023-04-07 19:16:43 +01:00
ole00
4c27435161
removed old pcb design
2023-04-07 19:16:43 +01:00
ole00
325b51d722
added new design gerbers
2023-04-07 19:16:43 +01:00
ole00
7ed84ffa63
removed old design gerbers
2023-04-07 19:16:43 +01:00
ole00
f9660f8eaf
added new design schematics
2023-04-07 19:16:43 +01:00
ole00
30f4590d4e
removed old schematics
2023-04-07 19:16:43 +01:00
ole00
4e3d4dafd9
images: added new design images
2023-04-07 19:16:43 +01:00
ole00
80d40e24a3
images: remove old design images
2023-04-07 19:16:43 +01:00
ole00
5bcb23f1a2
sketch: GAL20V8 - disable pull-up on DOUT when inactive
2023-04-07 19:16:43 +01:00
ole00
8d12ec9e58
sketch: default VPP for non-Atmel chips set as 12V
...
Also, the defaults are used if no PES check is requested.
2023-04-07 19:16:43 +01:00
ole00
7d332acae6
PC app: support for new board design
...
Added:
* detection of the new board design
* VPP measurement (use 'm' commands)
* setting of calibration offset (use '-co' parameter)
2023-04-07 19:16:41 +01:00
ole00
4db4108d4a
Sketch: added support for new board design (v 3.0)
...
New features:
* unified socket for 20 pin and 24 devices (including GAL20V8)
* variable VPP via digi pot
* VPP measurement via A0 ADC (used for VPP calibration)
2023-04-07 19:15:36 +01:00
ole00
48982f241a
Readme.md : updated VPP values for ATFs and Lattice GALs
2023-03-30 23:53:45 +01:00
ole00
7774c76626
sketch: added support for erase-all and write-pes commands
2023-03-30 23:34:28 +01:00
ole00
7b9ccc9f8d
sketch: removed obsolete variable
2023-03-30 23:34:28 +01:00
ole00
1a3a009885
PC app: added support for erase-all and write-pes commands
2023-03-30 23:34:23 +01:00
ole00
c67ced85e7
Readme.md - added ATF16V8CZ to the list of supported GALs
2023-03-28 21:38:37 +01:00
ole00
76a5d7fa9c
Sketch: added support for ATF16V8CZ
2023-03-28 21:30:15 +01:00
ole00
c6087fdfed
Readme.md - fixed dead link to CUPL Reference book
2023-03-25 23:35:14 +00:00
ole00
45f7fea022
Update Readme.md
2023-03-25 21:44:51 +00:00
ole00
65443dd5f2
added precompiled binaries for ver 0.4.2
2023-03-25 21:30:31 +00:00
ole00
81382a0e91
Afterburner sketch: updated top comments
2023-03-25 21:30:31 +00:00
ole00
630851857a
Removed old releases.
2023-03-25 21:30:31 +00:00
ole00
e9d005213e
Added support for Power-Down pin on ATF16V8C
...
The PD feature is now selectively enabled or disabled based
on the JED contents. Also, when fuses are read the printout
of the JED file reflects the PD fuse bit state. So, when
the PD fuse bit is enabled then the JED file contains an extra
fuse bit set to 1. The ATF22V10C now behaves the same way regarding
the PD fuse bit (previously Afterburner always disabled the PD
function).
credits: GALmate software
2023-03-25 21:30:31 +00:00
ole00
317b3520d8
Added support for securing/protecting the GAL
...
credits: GALmate software
2023-03-25 21:30:31 +00:00
ole00
ba15a74dee
Readme.md: support for ATF16V8C
...
Also added links to GALmate by Yorck and credited him for the ATF16V8C programming algorithm.
2023-03-21 23:43:02 +00:00
ole00
ffa637eb8e
PC app: lunx serial port read tweak
...
This change seems to fix a weird issue where some of the lines were split
in two lines. This could be reproduced when using 'i' command with ATF22V10C
or ATF16V8B repeatedly.
2023-03-21 23:23:24 +00:00
ole00
f48513f05b
sketch: read write and verify ATF16V8C
...
Based on GALmate by Yorck
https://www.ythiee.com/2021/06/06/galmate-hardware/
2023-03-21 20:48:47 +00:00
ole00
1dc2836125
sketch: reduced static memory allocation
2023-03-21 20:07:52 +00:00
ole00
45eb04de80
sketch: added detection of ATF16V8C
2023-03-21 19:58:40 +00:00
ole00
d393e0fcc8
Rewadme.md : update about the latest fix
2023-01-24 20:34:45 +00:00
ole00
f57bf6a1ef
version 0.4.1
2023-01-24 20:19:24 +00:00
ole00
ae955a8b6b
ensure GPIOs are set to Input when not active
...
This should prevent accidental damage of the GAL chip
during insertion into the socket.
2023-01-24 20:17:49 +00:00
ole00
ed14f825a5
fixed web url
2023-01-24 20:12:35 +00:00
ole00
9cf30e1611
updated title picture
2023-01-16 21:26:53 +00:00
ole00
aa53a480e7
added 3D printed case files
...
* use OpenScad to open the design .scad file
* the design file contains top part, bottom part and on/off switch
* .stl files are exported for your convenience
* .stl files can also be exported from OpenScad.
2023-01-15 22:04:20 +00:00
ole00
5689697b99
updated BOM
2023-01-07 11:45:47 +00:00
ole00
14c4eafc93
added adapter20v8 gerbers archive
2023-01-07 11:27:20 +00:00
ole00
52c63a60c8
fixed adapter PCB design for GAL20V8
...
* added SMT pads for resistors
* fixed bottom layer status
2023-01-07 11:25:48 +00:00
ole00
d19f8cc52f
new gerbers with R4 pull up resistor
2022-12-16 10:53:24 +00:00
ole00
996dfd8e93
Schematics: added pull up resistor R4 to SDOUT
...
Some GAL IC require pull-up on SDOUT
2022-12-15 19:55:14 +00:00
