Cleaning up markdown formatting
This commit is contained in:
parent
0b4deef806
commit
4e44d6f8b0
34
README.md
34
README.md
|
@ -3,29 +3,27 @@
|
||||||
Generating VGA video with an Arduino Uno / Atmega16u2 Microcontroller.
|
Generating VGA video with an Arduino Uno / Atmega16u2 Microcontroller.
|
||||||
|
|
||||||
**To Connect (atmega16u2):**
|
**To Connect (atmega16u2):**
|
||||||
Connect all grounds on the VGA connector together.
|
* Connect all grounds on the VGA connector together.
|
||||||
Connect VGA ground to the Arduino Gnd.
|
* Connect VGA ground to the Arduino Gnd.
|
||||||
Place a 120ohm resistor from the MOSI2 pin (Pin 4 on ICSP) to PB7 (Pin 4 on JP2)
|
* Place a 120ohm resistor from the MOSI2 pin (Pin 4 on ICSP) to PB7 (Pin 4 on JP2)
|
||||||
*Optional Protection* Place a 1N4148 diode from PB7 (anode) to Gnd (cathode).
|
* Connect the VGA red, blue and green inputs together and connect to PB7.
|
||||||
Connect the VGA red, blue and green inputs together and connect to PB7.
|
* Connect VGA vsync to PB5 (Pin 3 on JP2).
|
||||||
Connect VGA vsync to PB5 (Pin 3 on JP2).
|
* Connect VGA hsync to PB4 (Pin 1 on JP2).
|
||||||
Connect VGA hsync to PB4 (Pin 1 on JP2).
|
|
||||||
|
|
||||||
**To Assemble:**
|
**To Assemble:**
|
||||||
avr-as -mmcu=atmega16u2 -o ghettovga.o ghettovga.s
|
* avr-as -mmcu=atmega16u2 -o ghettovga.o ghettovga.s
|
||||||
avr-ld -m avr35 -o ghettovga.bin ghettovga.o
|
* avr-ld -m avr35 -o ghettovga.bin ghettovga.o
|
||||||
avr-objcopy -j .text -j .data -O ihex ghettovga.bin vghettovga.hex
|
* avr-objcopy -j .text -j .data -O ihex ghettovga.bin vghettovga.hex
|
||||||
|
|
||||||
**To Upload:**
|
**To Upload:**
|
||||||
Temporarily short pins 5 and 6 on the atmega16u2 ICSP header.
|
* Temporarily short pins 5 and 6 on the atmega16u2 ICSP header.
|
||||||
dfu-programmer atmega16u2 erase
|
* dfu-programmer atmega16u2 erase
|
||||||
dfu-programmer atmega16u2 flash "./ghettovga.hex"
|
* dfu-programmer atmega16u2 flash "./ghettovga.hex"
|
||||||
dfu-programmer atmega16u2 reset
|
* dfu-programmer atmega16u2 reset
|
||||||
|
|
||||||
**To Restore Arduino Bootloader**
|
**To Restore Arduino Bootloader**
|
||||||
Temporarily short pins 5 and 6 on the atmega16u2 ICSP header.
|
* Temporarily short pins 5 and 6 on the atmega16u2 ICSP header.
|
||||||
Retrieve the appropriate usb-serial hex from:
|
* Retrieve the appropriate usb-serial hex from: http://bit.ly/1E3pMbU
|
||||||
https://github.com/arduino/Arduino/tree/master/hardware/arduino/avr/firmwares/atmegaxxu2/arduino-usbserial
|
* Use dfu-programmer to flash hex to atmega16u2
|
||||||
Use dfu-programmer to flash hex to atmega16u2
|
|
||||||
|
|
||||||
Font glyphs copyright (c) 1981 Michael C. Koss http://mckoss.com/jscript/tinyalice.htm
|
Font glyphs copyright (c) 1981 Michael C. Koss http://mckoss.com/jscript/tinyalice.htm
|
Loading…
Reference in New Issue