- in header files, change ASDF_ARCH_DEFAULT_SCANNER to
ASDF_ARCH_DEFAULT_ROW_SCANNER
- remove unused ASDF_NUM_KEYMAPS definition in asdf_keymap_setup.h.in
- added keymap_setup() function to keymap tests
- The test string was not long enough to overflow the larger buffer.
Switched to use pseudo-random sequence intstead of a fixe test string.
- Added the apple 2 CAPS map
- auto-generate a function to check validity of a keymap index
- Added buffered message printing. This is different from keycode
buffering, since an extra delay is added for each message character to
allow polling hosts to keep up. Keycodes are generated at human speeds
and need no further slowdown.
- Added a message character delay to the arch-* modules
- enlarged the buffer pool, and created a buffer for messages
- bumped version number
This appears to have been a cut-paste typo in the asdf_arch_out2_set() function
in asdf_arch_atmega328p.c. The port was set to OUT2, but the bit was OUT1.
Remove initialization from data structure.
Replace the previous virtual_init() with a virtual_init() that initializes the
data structures to a default state
Create virtual_sync() function to push the state of virtual devices to the
physical outputs. Moved from the previous virtual_init() function.
The virtual device table is now built by direct calls to virtual_add() from the
setup function.
Toward issue [#23]
(WARNING: WIP) Gathered Work-in-progress on alternate keymap defs
Exploratory branch. Code is messy and untested.
Examining creating a module for each keymap rather than header file.
- arch-* files: replace private arch_strobe_init() function with public
arch_set_neg_strobe() and arch_set_pos_strobe() functions
- asdf.c,h: add ACTION hooks to set strobe polarity and enable/disable
autorepeat
- break out DIP switch definitions into a separate header file, included by each
keymap. This ensures consistent DIP switch behavior across keymaps.
- Replace V_PULSE with V_PULSE_LONG and V_PULSE_SHORT functions.
- replace the asdf_arch_pulse_delay() with asdf_arch_pulse_delay_short() and
asdf_arch_pulse_delay_long() functions.
- modify keymaps to use long and short pulses.
- long pulse is 50 ms. Short pulse is 10 us.
- Added localizing prefix to keymap definitions to avoid conflicts.
The apple 1 CLEAR input requires a high-impedance inactive state to avoid
conflict with the pin output of the 7404 at D12 (via CR4). So, to cover this
condition most generally, this patch changes the adds a Hi-Z when low physical
device for each output line, to complement the Hi-Z-when-high open collector
emulation. The nomenclature is changed from OUT*_OC (emulated open collector) to
OUT*_OPEN_HI and OUT*_OPEN_LO to indicate which condition gets the Hi-Z state.
- added the set() functions to the asdf_arch_atmega328p.[ch] files and applied
the above nomenclature.
- Added the set() functions to the asdf_physical.[ch] files and applied the
above nomenclature
- Modified the SCREEN_CLEAR device to PHYSICAL_OUT1_OPEN_LO in the apple2 and
ascii keymaps.
- Changed the RESET from PHYSICAL_OUT1_OC to PHYSICAL_OUT1_OPEN_HI in the apple2
and ascii keymaps.
- Split asdf_virtual.c into asdf_physical.c and asdf_virtual.c, moving the
functions that handle the physical resources to asdf_physical.c
- cleaned up nomenclature to be more consistent and less confusing.
- fixed keymap files and tests to use asdf_physical.c/h and new nomenclature.
- added asdf_physical.c to Makefiles.
* Created test fixture for virtual outputs
* Added virtual output configuration to keymap definitions removed special
actions_send_reset() and actions_send_screenclear() functions, and replaced with
virtual output definitions.
* asdf_actions.c is removed from build.
* asdf_arch_atmega328p.c: added functions to set/clear each real output
* asdf_arch_atmega328p.c: added pulse_delay() function
* asdf_arch_test.c: added mock machinery to emulate outputs, test output
settings, and detect properly and improperly-formed pulses on the outputs.
* asdf_keymaps.c: allocate initialzer array. asdf_keymaps_select_keymap() calls
asdf_virtual_init() with initializer list for the keymap to set up the LEDS and
outputs every time a new keymap is selected.
- asdf_modifier.c: refactor CAPS LOCK setting and add LED setting
- asdf_arch_atmega328p.[ch]: add in LED definitions and functions
- add dummy asdf_arch_caps_led() function to arch files so test can compile.
- Break out initialization of SYS_RESET, CLEAR, STROBE, and CAPS LED into
separate functions.
- Emulate open collector output for SYS_RESET: OFF=input with weak pullup.
ON=output low.
- Add function to cap CAPS LED.
- Separate the "asdf_keymaps.h" files into
-- "asdf_keymaps.h" which is not keymap dependent and contains keymap function
prototypes
-- "asdf_keymap_defs.h" which contains the keymap definitions
-- Move definitions of number of rows and columns from asdf.h to keymaps_defs.h.
-- keymap_defs.h is copied from the keymaps directory depending on which keymap
is specified in the Makefile.
-- Makefile fixes for the above changes
-- Fix includes in several files to reflect the above changes.
- added asdf_actions.c, asdf_actions.h to place misc. key actions
- asdf.c: asdf_activate_action(): added actions for screen clear and reset
- asdf_config.h, Arch/asdf_arch_atmega328p.c: added defs to specify polarity of data,
strobe, SCREEN_CLEAR and reset outputs.
- Arch/asdf_arch_atmega328p.h: fixed pin definitions for RESET and SCREEN_CLEAR
