mirror of
https://github.com/osiweb/unified_retro_keyboard.git
synced 2024-06-13 10:29:29 +00:00
Clarification of when to tightnet nuts
parent
7c04dd9b5d
commit
7bc7872e74
|
@ -91,7 +91,7 @@ the torsion-box structure, along with the soldered-in keyswitches.
|
||||||
4. Secure the screws by installing lockwashers and hex nuts on the back of the
|
4. Secure the screws by installing lockwashers and hex nuts on the back of the
|
||||||
PCB. Lightly finger-tighten the nuts just enough to stabilize the assembly,
|
PCB. Lightly finger-tighten the nuts just enough to stabilize the assembly,
|
||||||
while allowing adjustment of the alignment if needed when installing
|
while allowing adjustment of the alignment if needed when installing
|
||||||
switches.
|
switches in the next step.
|
||||||
|
|
||||||
[[images/aligner-assembly-complete.jpg]]
|
[[images/aligner-assembly-complete.jpg]]
|
||||||
|
|
||||||
|
@ -108,9 +108,10 @@ the torsion-box structure, along with the soldered-in keyswitches.
|
||||||
|
|
||||||
[[images/keys-boundaries.jpg]]
|
[[images/keys-boundaries.jpg]]
|
||||||
|
|
||||||
2. It may be necessary to adjust the alignment of the main PCB and aligner to
|
2. It may be necessary to slightly adjust the alignment of the main PCB and
|
||||||
ensure the keys snap in place smoothly. At this point, tighten the hext nuts
|
aligner to ensure the keys snap in place smoothly. Once these keys have been
|
||||||
with sufficient torque to flatten and fully engage the lockwashers.
|
installed, tighten the hext nuts with sufficient torque to flatten and fully
|
||||||
|
engage the lockwashers.
|
||||||
|
|
||||||
3. Install the rest of the keys, filling in the rows between the "boundary"
|
3. Install the rest of the keys, filling in the rows between the "boundary"
|
||||||
keys.
|
keys.
|
||||||
|
|
Loading…
Reference in New Issue
Block a user