Apple-2-SW/contiki
1
0
Fork 0
mirror of https://github.com/oliverschmidt/contiki.git synced 2024-12-21 19:29:18 +00:00
Code Issues Projects Releases Wiki Activity

Merge pull request #1507 from Zolertia/remote-voc-test

Browse Source 
Added VOC (iAQ-Core) drivers and test application
This commit is contained in:
Antonio Lignan 2016-02-15 12:21:32 +01:00
commit 0dbed519a5
4 changed files with 441 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
examples/zolertia/zoul/Makefile
View File

@ -3,12 +3,12 @@ DEFINES+=PROJECT_CONF_H=\"project-conf.h\"
CONTIKI_PROJECT = zoul-demo test-tsl2563 test-sht25 test-power-mgmt
CONTIKI_PROJECT += test-bmp085-bmp180 test-motion test-rotation-sensor
CONTIKI_PROJECT += test-grove-light-sensor test-grove-loudness-sensor
CONTIKI_PROJECT += test-weather-meter test-grove-gyro test-lcd
CONTIKI_PROJECT += test-weather-meter test-grove-gyro test-lcd test-iaq
CONTIKI_PROJECT += test-pm10-sensor test-vac-sensor test-aac-sensor
CONTIKI_TARGET_SOURCEFILES += tsl2563.c sht25.c bmpx8x.c motion-sensor.c
CONTIKI_TARGET_SOURCEFILES += adc-sensors.c weather-meter.c grove-gyro.c
CONTIKI_TARGET_SOURCEFILES += rgb-bl-lcd.c pm10-sensor.c
CONTIKI_TARGET_SOURCEFILES += rgb-bl-lcd.c pm10-sensor.c iaq.c
all: $(CONTIKI_PROJECT)

112
examples/zolertia/zoul/test-iaq.c Normal file
View File

@ -0,0 +1,112 @@
/*
* Copyright (c) 2016, Zolertia - http://www.zolertia.com
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
/**
* \addtogroup remote-examples
* @{
* \defgroup remote-iaq-test
*
* RE-Mote external IAQ test application
* Example of iAQ-Core implementation and simple operation reading the value
* of CO2, TVOC sensor and Status. The test checks for a each 5 minutes in
* order to get the first true measurement as datasheet recomendation
* (standard result of 0x82 is obtained in first time).
* Then, once initialized, periodically each 5 seconds reads
* the values of the IAQ sensor and shows in the screen, toggling the LED
* red if CO2 was not initialized and LED green if the reading was succeed.
*
* @{
* \file
* RE-Mote implementation of external IAQ-CORE-C test application
* \author
* Aitor Mejias <amejias@zolertia.com>
*/
/*---------------------------------------------------------------------------*/
#include "contiki.h"
#include "iaq.h"
#include "dev/i2c.h"
#include "dev/leds.h"
#include <stdio.h>
#include <stdlib.h>
/*---------------------------------------------------------------------------*/
/* Standard warm up time iAQ Sensor */
#define IAQ_INIT_WAIT 325L
#define LOOP_PERIOD 5L
#define LOOP_INTERVAL (CLOCK_SECOND * LOOP_PERIOD)
/*---------------------------------------------------------------------------*/
PROCESS(test_remote_iaq_process, "Test IAQ driver process");
AUTOSTART_PROCESSES(&test_remote_iaq_process);
/*---------------------------------------------------------------------------*/
static struct etimer et;
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(test_remote_iaq_process, ev, data)
{
static uint16_t count_delay = 0;
static uint16_t status = 0;
PROCESS_BEGIN();
/* Configure IAQ and return structure with all parameters */
SENSORS_ACTIVATE(iaq);
while(1) {
/* Wait a bit */
etimer_set(&et, (LOOP_INTERVAL));
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
status = iaq.status(IAQ_DRIVER_STATUS);
if(status == IAQ_INIT_STATE) {
count_delay += LOOP_PERIOD;
leds_toggle(LEDS_RED);
printf("Test-IAQ: Initializing Time-elapsed: %u seconds of aprox. %lu sec.\n",
count_delay, IAQ_INIT_WAIT);
} else if(status == IAQ_ACTIVE) {
leds_off(LEDS_RED);
leds_toggle(LEDS_GREEN);
/* Get data from sensor: VOC, CO2 and internal status */
printf("CO2 current value is: %d ppm\n", iaq.value(IAQ_VOC_VALUE));
printf("TIAQ current value is: %d ppb\n", iaq.value(IAQ_CO2_VALUE));
printf("Status is: 0x%0X\n", iaq.value(IAQ_STATUS));
}
else {
printf("iAQ-Core Error: 0x%02X\n", status);
}
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
/**
* @}
* @}
*/

202
platform/zoul/dev/iaq.c Normal file
View File

@ -0,0 +1,202 @@
/*
* Copyright (c) 2016, Zolertia <http://www.zolertia.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/*---------------------------------------------------------------------------*/
/**
* \addtogroup zoul-iaq-sensor
* @{
* Driver for the RE-Mote IAQ iAQ-Core (Indoor Air Quality Sensor)
* \file
* Driver for the RE-Mote RF IAQ iAQ-Core sensor (IAQ)
* \author
* Aitor Mejias <amejias@zolertia.com>
*/
/*---------------------------------------------------------------------------*/
#include <stdio.h>
#include "contiki.h"
#include "dev/gpio.h"
#include "dev/i2c.h"
#include "iaq.h"
#include "sys/timer.h"
#include "sys/etimer.h"
#include "lib/sensors.h"
/*---------------------------------------------------------------------------*/
#define DEBUG 0
#if DEBUG
#define PRINTF(...) printf(__VA_ARGS__)
#else
#define PRINTF(...)
#endif
/*---------------------------------------------------------------------------*/
/* Callback pointers when interrupt occurs */
void (*iaq_enable_callback)(uint16_t value);
/*---------------------------------------------------------------------------*/
static int16_t enabled;
/*---------------------------------------------------------------------------*/
static struct etimer et;
static simple_iaq_data iaq_data;
static uint8_t iaq_buffer[IAQ_FRAME_SIZE+1];
/*---------------------------------------------------------------------------*/
PROCESS(iaq_process, "IAQ process handler");
/*---------------------------------------------------------------------------*/
static int
status(int type)
{
/* Return the status of the iAQ-Core or the status of the driver */
if (type == IAQ_STATUS) {
return (uint16_t)iaq_data.status;
} else if (type == IAQ_DRIVER_STATUS) {
return enabled;
}
return 0;
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(iaq_process, ev, data)
{
#if DEBUG
uint8_t i = 0;
#endif
PROCESS_EXITHANDLER();
PROCESS_BEGIN();
i2c_init(I2C_SDA_PORT, I2C_SDA_PIN, I2C_SCL_PORT, I2C_SCL_PIN,
I2C_SCL_NORMAL_BUS_SPEED);
while(1) {
etimer_set(&et, (IAQ_POLLING_TIME));
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
i2c_master_enable();
if(i2c_burst_receive(IAQ_ADDR, &iaq_buffer[0], IAQ_FRAME_SIZE) !=
I2C_MASTER_ERR_NONE) {
PRINTF("IAQ: Failed to retrieve data from IAQ\n");
enabled = IAQ_ERROR;
iaq_data.status = IAQ_INTERNAL_ERROR;
} else {
#if DEBUG
PRINTF("IAQ: Buffer ");
for (i=1;i<10;i++) {
PRINTF("[%d] %x, ", i-1, iaq_buffer[i-1]);
}
PRINTF("\n");
#endif
/* Update the status of the sensor. This value readed represents the
internal status of the external driver. */
switch (iaq_buffer[2]) {
case IAQ_INTERNAL_SUCCESS:
enabled = IAQ_ACTIVE;
break;
case IAQ_INTERNAL_RUNIN:
enabled = IAQ_INIT_STATE;
break;
case IAQ_INTERNAL_BUSY:
case IAQ_INTERNAL_ERROR:
enabled = IAQ_ERROR;
break;
default:
enabled = IAQ_ERROR;
break;
}
iaq_data.tvoc = ((uint16_t)iaq_buffer[0] << 8) + iaq_buffer[1];
iaq_data.co2 = ((uint16_t)iaq_buffer[7] << 8) + iaq_buffer[8];
iaq_data.status = iaq_buffer[2];
}
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
static int
value(int type)
{
if (!enabled) {
PRINTF("IAQ: Sensor not enabled\n");
return IAQ_ERROR;
}
if (enabled == IAQ_INIT_STATE) {
PRINTF("IAQ: Sensor initializing\n");
return IAQ_INIT_STATE;
}
if (type == IAQ_CO2_VALUE) {
return iaq_data.co2;
}
if (type == IAQ_VOC_VALUE) {
return iaq_data.tvoc;
}
if (type == IAQ_STATUS) {
#if DEBUG
switch (iaq_data.status) {
case IAQ_INTERNAL_SUCCESS:
PRINTF("IAQ Status: SUCCESS\n");
break;
case IAQ_INTERNAL_RUNIN:
PRINTF("IAQ Status: WARM UP\n");
break;
case IAQ_INTERNAL_BUSY:
case IAQ_INTERNAL_ERROR:
PRINTF("IAQ Status: ERROR\n");
break;
default:
PRINTF("IAQ Status: UNKNOWN STATUS %d\n", iaq_data.status);
break;
}
#endif
return iaq_data.status;
}
return IAQ_ERROR;
}
/*---------------------------------------------------------------------------*/
static int
configure(int type, int value)
{
/* Check the current status. If is initialized or is active, return the same
state */
if ((enabled == IAQ_INIT_STATE) || (enabled == IAQ_ACTIVE)) {
return IAQ_ERROR;
}
/* Fix the status in initial wait status */
enabled = IAQ_INIT_STATE;
/* Start Internal process to measure the iAQ Sensor */
process_start(&iaq_process, NULL);
return enabled;
}
/*---------------------------------------------------------------------------*/
/* name, type, value, configure, status */
SENSORS_SENSOR(iaq, IAQ_SENSOR, value, configure, status);
/*---------------------------------------------------------------------------*/
/**
* @}
*/

125
platform/zoul/dev/iaq.h Normal file
View File

@ -0,0 +1,125 @@
/*
* Copyright (c) 2016, Zolertia <http://www.zolertia.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/* -------------------------------------------------------------------------- */
/**
* \addtogroup zoul-sensors
* @{
* \defgroup zoul-iaq-sensor IAQ driver (Indoor Air Quality) Sensor Module
* IAQ driver RE-Mote Indoor Air Quality Sensor Module
* Driver for the RE-Mote Sensor pack: Air Quality Sensor Module (IAQ)
* @{
* \file
* Header file for the RE-Mote Sensor IAQ
*/
/* -------------------------------------------------------------------------- */
#ifndef IAQ_H_
#define IAQ_H_
/* -------------------------------------------------------------------------- */
#include <stdio.h>
#include "lib/sensors.h"
#include "dev/zoul-sensors.h"
#include "iaq.h"
#include "i2c.h"
#include "sys/timer.h"
#include "sys/rtimer.h"
/* -------------------------------------------------------------------------- */
/** \name IAQ address and definition
* @{
*/
/* Address of the sensor: 1011010(1) Addr (R/W bit) */
#define IAQ_ADDR 0x5A
#define IAQ_SENSOR "iAQ"
/** @} */
/* -------------------------------------------------------------------------- */
/** \name IAQ sensor types in iAQ-Core module
* @{
*/
extern const struct sensors_sensor iaq;
/** @} */
/* -------------------------------------------------------------------------- */
/** \name IAQ error values and definitions
* @{
*/
#define IAQ_ACTIVE SENSORS_ACTIVE
#define IAQ_INIT_STATE SENSORS_HW_INIT
#define IAQ_ERROR (-1)
#define IAQ_SUCCESS 0x00
#define IAQ_FRAME_SIZE 0x09
/* Variables used by external driver to get the state */
#define IAQ_INTERNAL_SUCCESS 0x00
#define IAQ_INTERNAL_RUNIN 0x10
#define IAQ_INTERNAL_BUSY 0x01
#define IAQ_INTERNAL_ERROR 0x80
/* Value types for the sensor readings */
#define IAQ_CO2_VALUE 0x00
#define IAQ_VOC_VALUE 0x01
#define IAQ_STATUS 0x02
#define IAQ_DRIVER_STATUS 0x03
/* Definition that corresponds with the two models of iAQ Sensor */
#ifdef IAQ_PULSE_MODE
#define IAQ_POLLING_TIME (CLOCK_SECOND * 11)
#else
#define IAQ_POLLING_TIME (CLOCK_SECOND)
#endif
/** @} */
/* -------------------------------------------------------------------------- */
/** \name IAQ enumeration and options
* @{
*/
enum {
IAQ_INIT = 0,
IAQ_STARTED,
};
/** @} */
/* -------------------------------------------------------------------------- */
/** \name Readable IAQ-Core interface result conversion implementation as
* datasheet specification.
*
* @{
*/
typedef struct iaq_struct_simple_td_reg {
uint16_t co2;
uint8_t status;
int32_t resistance;
uint16_t tvoc;
} __attribute__ ((packed)) simple_iaq_data;
/** @} */
/* -------------------------------------------------------------------------- */
#endif
/* -------------------------------------------------------------------------- */
/**
* @}
* @}
*/