mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-12-23 01:29:33 +00:00
Add a driver for the HDC1000 sensor
This commit is contained in:
George Oikonomou
parent
540838be94
commit
7e3b8d6fcc
304
platform/srf06-cc26xx/sensortag/hdc-1000-sensor.c
Normal file
304
platform/srf06-cc26xx/sensortag/hdc-1000-sensor.c
Normal file
@ -0,0 +1,304 @@
|
||||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-hdc-sensor
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Driver for the Sensortag-CC26xx HDC sensor
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "contiki-conf.h"
|
||||
#include "sys/ctimer.h"
|
||||
#include "lib/sensors.h"
|
||||
#include "hdc-1000-sensor.h"
|
||||
#include "sensor-common.h"
|
||||
#include "board-i2c.h"
|
||||
|
||||
#include "ti-lib.h"
|
||||
|
||||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
#include <stdbool.h>
|
||||
#include <stdio.h>
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define DEBUG 0
|
||||
#if DEBUG
|
||||
#define PRINTF(...) printf(__VA_ARGS__)
|
||||
#else
|
||||
#define PRINTF(...)
|
||||
#endif
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Sensor I2C address */
|
||||
#define SENSOR_I2C_ADDRESS 0x43
|
||||
|
||||
/* Registers */
|
||||
#define HDC1000_REG_TEMP 0x00 /* Temperature */
|
||||
#define HDC1000_REG_HUM 0x01 /* Humidity */
|
||||
#define HDC1000_REG_CONFIG 0x02 /* Configuration */
|
||||
#define HDC1000_REG_SERID_H 0xFB /* Serial ID high */
|
||||
#define HDC1000_REG_SERID_M 0xFC /* Serial ID middle */
|
||||
#define HDC1000_REG_SERID_L 0xFD /* Serial ID low */
|
||||
#define HDC1000_REG_MANF_ID 0xFE /* Manufacturer ID */
|
||||
#define HDC1000_REG_DEV_ID 0xFF /* Device ID */
|
||||
|
||||
/* Fixed values */
|
||||
#define HDC1000_VAL_MANF_ID 0x5449
|
||||
#define HDC1000_VAL_DEV_ID 0x1000
|
||||
#define HDC1000_VAL_CONFIG 0x1000 /* 14 bit, acquired in sequence */
|
||||
|
||||
/* Sensor selection/deselection */
|
||||
#define SENSOR_SELECT() board_i2c_select(BOARD_I2C_INTERFACE_0, SENSOR_I2C_ADDRESS)
|
||||
#define SENSOR_DESELECT() board_i2c_deselect()
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Byte swap of 16-bit register value */
|
||||
#define HI_UINT16(a) (((a) >> 8) & 0xFF)
|
||||
#define LO_UINT16(a) ((a) & 0xFF)
|
||||
|
||||
#define SWAP(v) ((LO_UINT16(v) << 8) | HI_UINT16(v))
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/* Raw data as returned from the sensor (Big Endian) */
|
||||
typedef struct sensor_data {
|
||||
uint16_t temp;
|
||||
uint16_t hum;
|
||||
} sensor_data_t;
|
||||
|
||||
/* Raw data, little endian */
|
||||
static uint16_t raw_temp;
|
||||
static uint16_t raw_hum;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static bool success;
|
||||
static sensor_data_t data;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static int enabled = HDC_1000_SENSOR_STATUS_DISABLED;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/*
|
||||
* Maximum measurement durations in clock ticks. We use 14bit resolution, thus:
|
||||
* - Tmp: 6.35ms
|
||||
* - RH: 6.5ms
|
||||
*/
|
||||
#define MEASUREMENT_DURATION 2
|
||||
|
||||
/*
|
||||
* Wait SENSOR_STARTUP_DELAY clock ticks between activation and triggering a
|
||||
* reading (max 15ms)
|
||||
*/
|
||||
#define SENSOR_STARTUP_DELAY 3
|
||||
|
||||
static struct ctimer startup_timer;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Initialise the humidity sensor driver
|
||||
* \return True if I2C operation successful
|
||||
*/
|
||||
static bool
|
||||
sensor_init(void)
|
||||
{
|
||||
uint16_t val;
|
||||
|
||||
SENSOR_SELECT();
|
||||
|
||||
/* Enable reading data in one operation */
|
||||
val = SWAP(HDC1000_VAL_CONFIG);
|
||||
success = sensor_common_write_reg(HDC1000_REG_CONFIG, (uint8_t *)&val, 2);
|
||||
|
||||
SENSOR_DESELECT();
|
||||
|
||||
return success;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Start measurement
|
||||
*/
|
||||
static void
|
||||
start(void)
|
||||
{
|
||||
if(success) {
|
||||
SENSOR_SELECT();
|
||||
|
||||
success = board_i2c_write_single(HDC1000_REG_TEMP);
|
||||
SENSOR_DESELECT();
|
||||
}
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Take readings from the sensor
|
||||
* \return true of I2C operations successful
|
||||
*/
|
||||
static bool
|
||||
read_data()
|
||||
{
|
||||
bool valid;
|
||||
|
||||
if(success) {
|
||||
SENSOR_SELECT();
|
||||
|
||||
success = board_i2c_read((uint8_t *)&data, sizeof(data));
|
||||
SENSOR_DESELECT();
|
||||
|
||||
/* Store temperature */
|
||||
raw_temp = SWAP(data.temp);
|
||||
|
||||
/* Store humidity */
|
||||
raw_hum = SWAP(data.hum);
|
||||
}
|
||||
|
||||
valid = success;
|
||||
success = true;
|
||||
|
||||
return valid;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Convert raw data to temperature and humidity
|
||||
* \param temp - converted temperature
|
||||
* \param hum - converted humidity
|
||||
*/
|
||||
static void
|
||||
convert(float *temp, float *hum)
|
||||
{
|
||||
/* Convert temperature to degrees C */
|
||||
*temp = ((double)(int16_t)raw_temp / 65536) * 165 - 40;
|
||||
|
||||
/* Convert relative humidity to a %RH value */
|
||||
*hum = ((double)raw_hum / 65536) * 100;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
static void
|
||||
notify_ready(void *not_used)
|
||||
{
|
||||
enabled = HDC_1000_SENSOR_STATUS_READINGS_READY;
|
||||
|
||||
/* Latch readings */
|
||||
read_data();
|
||||
|
||||
sensors_changed(&hdc_1000_sensor);
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Returns a reading from the sensor
|
||||
* \param type HDC_1000_SENSOR_TYPE_TEMP or HDC_1000_SENSOR_TYPE_HUMIDITY
|
||||
* \return Temperature (centi degrees C) or Humidity (centi %RH)
|
||||
*/
|
||||
static int
|
||||
value(int type)
|
||||
{
|
||||
int rv;
|
||||
float temp;
|
||||
float hum;
|
||||
|
||||
if(enabled != HDC_1000_SENSOR_STATUS_READINGS_READY) {
|
||||
PRINTF("Sensor disabled or starting up (%d)\n", enabled);
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
}
|
||||
|
||||
if((type != HDC_1000_SENSOR_TYPE_TEMP) &&
|
||||
type != HDC_1000_SENSOR_TYPE_HUMIDITY) {
|
||||
PRINTF("Invalid type\n");
|
||||
return CC26XX_SENSOR_READING_ERROR;
|
||||
} else {
|
||||
convert(&temp, &hum);
|
||||
PRINTF("HDC: %04X %04X t=%d h=%d\n", raw_temp, raw_hum,
|
||||
(int)(temp * 100), (int)(hum * 100));
|
||||
|
||||
if(type == HDC_1000_SENSOR_TYPE_TEMP) {
|
||||
rv = (int)(temp * 100);
|
||||
} else if(type == HDC_1000_SENSOR_TYPE_HUMIDITY) {
|
||||
rv = (int)(hum * 100);
|
||||
}
|
||||
}
|
||||
return rv;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Configuration function for the HDC1000 sensor.
|
||||
*
|
||||
* \param type Activate, enable or disable the sensor. See below
|
||||
* \param enable
|
||||
*
|
||||
* When type == SENSORS_HW_INIT we turn on the hardware
|
||||
* When type == SENSORS_ACTIVE and enable==1 we enable the sensor
|
||||
* When type == SENSORS_ACTIVE and enable==0 we disable the sensor
|
||||
*/
|
||||
static int
|
||||
configure(int type, int enable)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_HW_INIT:
|
||||
raw_temp = 0;
|
||||
raw_hum = 0;
|
||||
memset(&data, 0, sizeof(data));
|
||||
|
||||
sensor_init();
|
||||
enabled = HDC_1000_SENSOR_STATUS_INITIALISED;
|
||||
break;
|
||||
case SENSORS_ACTIVE:
|
||||
/* Must be initialised first */
|
||||
if(enabled == HDC_1000_SENSOR_STATUS_DISABLED) {
|
||||
return HDC_1000_SENSOR_STATUS_DISABLED;
|
||||
}
|
||||
if(enable) {
|
||||
start();
|
||||
ctimer_set(&startup_timer, SENSOR_STARTUP_DELAY, notify_ready, NULL);
|
||||
enabled = HDC_1000_SENSOR_STATUS_TAKING_READINGS;
|
||||
} else {
|
||||
ctimer_stop(&startup_timer);
|
||||
enabled = HDC_1000_SENSOR_STATUS_INITIALISED;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return enabled;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \brief Returns the status of the sensor
|
||||
* \param type SENSORS_ACTIVE or SENSORS_READY
|
||||
* \return One of the SENSOR_STATUS_xyz defines
|
||||
*/
|
||||
static int
|
||||
status(int type)
|
||||
{
|
||||
switch(type) {
|
||||
case SENSORS_ACTIVE:
|
||||
case SENSORS_READY:
|
||||
return enabled;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return HDC_1000_SENSOR_STATUS_DISABLED;
|
||||
}
|
||||
/*---------------------------------------------------------------------------*/
|
||||
SENSORS_SENSOR(hdc_1000_sensor, "HDC1000", value, configure, status);
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @} */
|
||||
116
platform/srf06-cc26xx/sensortag/hdc-1000-sensor.h
Executable file
116
platform/srf06-cc26xx/sensortag/hdc-1000-sensor.h
Executable file
@ -0,0 +1,116 @@
|
||||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*
|
||||
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of the copyright holder nor the names of its
|
||||
* contributors may be used to endorse or promote products derived
|
||||
* from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
||||
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \addtogroup sensortag-cc26xx-peripherals
|
||||
* @{
|
||||
*
|
||||
* \defgroup sensortag-cc26xx-hdc-sensor SensorTag 2.0 TI HDC1000 Sensor
|
||||
*
|
||||
* Due to the time required for the sensor to startup, this driver is meant to
|
||||
* be used in an asynchronous fashion. The caller must first activate the
|
||||
* sensor by calling SENSORS_ACTIVATE(). This will trigger the sensor's startup
|
||||
* sequence, but the call will not wait for it to complete so that the CPU can
|
||||
* perform other tasks or drop to a low power mode. Once the sensor has taken
|
||||
* readings, it will automatically go back to low power mode.
|
||||
*
|
||||
* Once the sensor is stable, the driver will retrieve readings from the sensor
|
||||
* and latch them. It will then generate a sensors_changed event.
|
||||
*
|
||||
* The user can then retrieve readings by calling .value() and by passing
|
||||
* either HDC_1000_SENSOR_TYPE_TEMP or HDC_1000_SENSOR_TYPE_HUMIDITY as the
|
||||
* argument. Multiple calls to value() will not trigger new readings, they will
|
||||
* simply return the most recent latched values.
|
||||
*
|
||||
* The user can query the sensor's status by calling .status()
|
||||
*
|
||||
* To get a fresh reading, the user must trigger a new reading cycle by calling
|
||||
* SENSORS_ACTIVATE().
|
||||
* @{
|
||||
*
|
||||
* \file
|
||||
* Header file for the Sensortag-CC26ss TI HDC1000 sensor
|
||||
*/
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#ifndef HDC_1000_SENSOR_H
|
||||
#define HDC_1000_SENSOR_H
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#include "lib/sensors.h"
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#define HDC_1000_SENSOR_TYPE_TEMP 1
|
||||
#define HDC_1000_SENSOR_TYPE_HUMIDITY 2
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* \name HDC1000 driver states
|
||||
* @{
|
||||
*/
|
||||
#define HDC_1000_SENSOR_STATUS_DISABLED 0 /**< Not initialised */
|
||||
#define HDC_1000_SENSOR_STATUS_INITIALISED 1 /**< Initialised but idle */
|
||||
#define HDC_1000_SENSOR_STATUS_TAKING_READINGS 2 /**< Readings in progress */
|
||||
#define HDC_1000_SENSOR_STATUS_READINGS_READY 3 /**< Both readings ready */
|
||||
/** @} */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
extern const struct sensors_sensor hdc_1000_sensor;
|
||||
/*---------------------------------------------------------------------------*/
|
||||
#endif /* HDC_1000_SENSOR_H */
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
* @}
|
||||
*/
|
||||
Loading…
Reference in New Issue
Block a user