Commit Graph

65 Commits

Author SHA1 Message Date
dak664
b438b78097 Fix configuration for RPL build (no packet queuing, default no TCP) 2010-12-18 22:37:02 +00:00
dak664
9575daede2 Add working cx-max configuration values. 2010-12-18 20:53:36 +00:00
dak664
aa7ad8c807 Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan. 2010-12-15 16:50:44 +00:00
dak664
ced88c2eff Give jackdaw fe80::0 address and number webservers from fe80::1 2010-12-14 23:22:01 +00:00
dak664
1d2a5ca671 Minor format and comment changes 2010-12-14 22:51:04 +00:00
dak664
d8fe44645c Refactor, tune, add SICSLOWPAN_CONF_ACK_ALL defines for testing radio acks 2010-12-14 22:39:38 +00:00
dak664
a9dedfee4f Refactor contiki-conf files, remove obsolete defines. 2010-12-13 23:31:13 +00:00
dak664
35b2ce0cdb Add status page link, show correct rssi, fix indexing off array in ipv4 builds 2010-12-04 21:32:35 +00:00
dak664
58b7a19803 Hardware/software radio HAL patch from Roger Larsson.
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664
3d3ad9e2c2 Fixes to allow ipv4 (hello world) builds 2010-12-01 16:23:55 +00:00
dak664
5a4fa388da Refuse to play ping-pong with host interface 2010-11-29 21:22:41 +00:00
dak664
0735b431aa Enable RPL neighbor webserver page 2010-11-29 21:21:36 +00:00
dak664
dc028b3f85 Get rssi correctly in either rx mode, clean up radio driver debugging 2010-11-26 20:39:15 +00:00
dak664
880233a451 RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing. 2010-11-24 18:46:57 +00:00
dak664
da8ad17c02 Save 256 bytes of RAM by excluding floating point routine 2010-11-21 17:56:36 +00:00
dak664
b3324c6d23 Add menu option to temporarily disable RS232 debug output for higher 6lowpan throughput.
Functional rpl with RNDIS/Ubuntu (tested on Raven single hops)
2010-11-19 20:02:25 +00:00
dak664
fe19719a16 Fix printf_P error 2010-11-18 14:33:10 +00:00
dak664
cc7fea92d2 Force ipv6 when building with fakeuip 2010-11-13 16:28:46 +00:00
dak664
72d49c20af Allow non-ipv6 build (hello world) 2010-11-12 20:49:03 +00:00
dak664
acd9d516d8 Add RPL neighbors and routes printout to Jackdaw menu 2010-11-05 20:35:15 +00:00
dak664
9194b3ac69 Fix error when RS232 not enabled 2010-10-28 19:31:28 +00:00
dak664
ad6712736b Fix Windows XP RNDIS+CDC serial port enumeration 2010-10-28 19:30:14 +00:00
dak664
258e3cc93a Allow simultaneous use of RS232 and USB serial ports 2010-10-27 14:51:20 +00:00
dak664
123e3cae41 Fix compiler warnings 2010-10-23 15:26:46 +00:00
adamdunkels
5585d72c86 A simple but substantial change: uIP used the htons()/HTONS() macro
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.

This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
2010-10-19 18:29:03 +00:00
dak664
110bc0242e Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum 2010-09-17 21:59:09 +00:00
dak664
dc9f16131c Make fake routines conditional on CONTIKI_NO_NET 2010-09-14 19:16:53 +00:00
dak664
6d3c276e7e Add rpl configuration and webserver options. 2010-09-14 19:13:05 +00:00
dak664
b9b4f07ad9 Add internal webserver option 2010-09-14 17:03:29 +00:00
dak664
0858f71e6a Add rpl webserver option 2010-09-14 16:59:44 +00:00
dak664
3bee71ad81 Add simple webserver for RPL status 2010-08-26 18:55:43 +00:00
dak664
885fee3561 Add RPL border router process 2010-08-06 17:39:31 +00:00
dak664
b706c48efd Add experimental RPL code
Change RF channel to 26 for econotag compatibility
2010-08-03 19:55:42 +00:00
dak664
08897e1c1f Add explicit queuebuf and packetbuf to build 2010-06-22 17:10:24 +00:00
joxe
c4278dedc2 replaced uip_buf with the new uip_aligned_buf 2010-06-03 11:37:50 +00:00
dak664
6909f291af Use siimple ethernet address translation for RF230BB by default.
That gets pings and webserver working again for Vista and W7.
Hopefully it won't break something that already works...
2010-05-08 17:17:17 +00:00
dak664
f03600d4e3 update to uip-ds6.c 2010-03-18 14:36:00 +00:00
dak664
cae40439d7 Add optional RS232 debugging 2010-03-15 18:56:13 +00:00
dak664
d3697344ec Update for NETSTACK_CONF_FRAMER 2010-03-02 16:25:47 +00:00
dak664
feb6aa0ed2 Change back to SICSLOWPAN_COMPRESSION_HC06 from SICSLOWPAN_COMPRESSION_HC01 2010-02-28 21:39:40 +00:00
dak664
39e6f6a830 Clean up, functional webserver for further testing of low power protocols 2010-02-28 21:29:19 +00:00
c_oflynn
b5b77ac47a Use new HC06 2010-02-26 10:55:00 +00:00
dak664
64d57a3dd8 Update jackdaw to new radio driver interface 2010-02-23 17:35:49 +00:00
dak664
a64a8674bc Remove debug print 2010-02-23 02:22:25 +00:00
dak664
6df1e0ca58 add experimental cxmac code 2010-02-18 17:24:12 +00:00
dak664
72e1528ea7 Make sicslowmac the default! 2010-02-16 23:42:06 +00:00
dak664
53801ffbb1 Add optional RF230BB radio driver 2010-02-16 22:17:51 +00:00
dak664
1bdff78e6e Remove compiler warnings 2010-02-15 20:54:37 +00:00
dak664
e12e794a74 QUEUEBUF fragmentation defines 2010-02-08 22:22:27 +00:00
c_oflynn
95d0b09954 -Fix that can cause USB stick to freeze up
-Add EEM Support
2010-02-04 10:40:00 +00:00