kasunch
|
1ee52635c8
|
1. Changed fuse bits to preserve EEPROM through the chip erase when uploading a new OS image.
2. Added a new make rule to erase EEPROM through the chip erase.
|
2009-09-24 07:09:31 +00:00 |
|
kasunch
|
71b5872045
|
Added node id restoring at the boot-up.
|
2009-09-24 06:53:35 +00:00 |
|
kasunch
|
5e1db8b6fa
|
Added node id restoring and burning functions.
|
2009-09-24 06:51:22 +00:00 |
|
kasunch
|
f617b77b87
|
Added the EEPROM starting address of node id.
|
2009-09-24 06:45:48 +00:00 |
|
nvt-se
|
fc34a4572b
|
Removed the deprecated COFFEE_DIR_CACHE_ENTRIES parameter.
|
2009-09-22 16:31:36 +00:00 |
|
nvt-se
|
3b205a8912
|
removed compiler warning about missing declaration.
|
2009-09-22 16:27:17 +00:00 |
|
nvt-se
|
19d697fd37
|
use megabyte unit for printing SD card capacity.
|
2009-09-22 16:24:03 +00:00 |
|
nvt-se
|
aef32d8144
|
moved synchronization word definition to the right place.
removed memcpy call for a two byte copy. also led to a relocation error
in some versions of the mspgcc linker.
|
2009-09-22 16:20:39 +00:00 |
|
nvt-se
|
ce32792812
|
define U1IFG if it is missing.
|
2009-09-22 16:04:03 +00:00 |
|
nvt-se
|
f698ce2577
|
Adapted the simple SD test to the new driver and its interface.
|
2009-09-22 15:37:18 +00:00 |
|
nvt-se
|
12c6dbb7c6
|
switched to emulated random I/O functions in the SD driver
|
2009-09-22 15:36:33 +00:00 |
|
nvt-se
|
1fb5841454
|
introduced WITH_SD parameter. added missing variable.
|
2009-09-22 15:35:45 +00:00 |
|
nvt-se
|
ea56edc5c2
|
added a simple driver for using SD devices through the SPI.
|
2009-09-22 15:20:51 +00:00 |
|
nifi
|
a71cd04144
|
reconfigured coffee to use larger sectors and no micrologs, changed the architecture specific erase function accordingly
|
2009-09-21 14:16:32 +00:00 |
|
nvt-se
|
4fd4cb1238
|
Architecture-dependent Coffee functions for SD cards.
|
2009-09-17 14:37:32 +00:00 |
|
nvt-se
|
20f449c3e8
|
micro logs are not needed in SD memory.
|
2009-09-17 14:19:06 +00:00 |
|
nvt-se
|
519532183f
|
do not enable Coffee until the new SD driver is in place.
|
2009-09-17 13:28:41 +00:00 |
|
nvt-se
|
84b0ec7798
|
Removed unstable SD driver (to be replaced.)
|
2009-09-17 13:24:49 +00:00 |
|
kasunch
|
4319e8b82e
|
1. Add MAC address displaying during the booting.
2. Set LEDs to turn on at different stages of the booting process.
|
2009-09-13 21:42:43 +00:00 |
|
kasunch
|
7444c41da9
|
Adding device driver files for the Dallas Semiconductor DS2401 chip to the CONTIKI_TARGET_SOURCEFILES list.
|
2009-09-13 21:28:48 +00:00 |
|
kasunch
|
e2224a8384
|
Device driver for the Dallas Semiconductor DS2401 chip.
|
2009-09-13 21:21:16 +00:00 |
|
oliverschmidt
|
392c3aa2b6
|
Updated URL from Loader 1.3 to Loader 1.4.
|
2009-09-13 19:59:34 +00:00 |
|
oliverschmidt
|
daf29d0a87
|
Supply prototype even if there's no implementation (yet) to keep compiler happy.
|
2009-09-13 19:07:34 +00:00 |
|
zdshelby
|
ec02eab6bc
|
- Upgraded the Sensinode platform to use sicslowmac.c
- Improved the rime address setup, setting the RF driver addresses (byte order may not be correct)
|
2009-09-11 08:03:42 +00:00 |
|
adamdunkels
|
bddd31abf2
|
Fixed compiler warnings
|
2009-09-09 21:06:51 +00:00 |
|
zdshelby
|
c4ae18e37b
|
Initial commit of Sensinode platform files.
|
2009-09-08 20:06:28 +00:00 |
|
zhitao
|
bdce08d39d
|
augmented CFS compliance for a RAM-based, one-file-only file system in Cooja.
|
2009-09-08 15:08:20 +00:00 |
|
kasunch
|
1bede62d2a
|
Initial files of the MICAz port.
|
2009-09-08 08:59:29 +00:00 |
|
joxe
|
ae8bd7a7b6
|
added inclusion of radio Makefile for the raven platforms
|
2009-09-07 12:06:33 +00:00 |
|
nifi
|
d4b619bcc5
|
Renamed SPI_WAITFOREOTxBUF to SPI_WAITFORTxREADY for clarity and generalized SPI transmission status checks to work with both AVR and MSP430
|
2009-09-07 11:31:26 +00:00 |
|
nvt-se
|
9d7bdad864
|
use CLOCK_CONF_SECOND.
|
2009-09-04 13:59:37 +00:00 |
|
nvt-se
|
fed4a58102
|
return the amount of seconds elapsed in clock_seconds()
|
2009-09-04 13:57:17 +00:00 |
|
nvt-se
|
cd96248306
|
only turn off if we are not in CC1020_OFF state. (patch by Jesper Karlsson)
|
2009-09-04 11:00:48 +00:00 |
|
nvt-se
|
a21dece53f
|
removed unused state codes and unused printf statements
|
2009-09-03 12:57:57 +00:00 |
|
nifi
|
3a8ee769cb
|
Changed to monitor the UART transmitter buffer ready flag instead of the UART transmitter empty flag. This almost doubles the speed of transmitting data to CC2420. Patch by James Brown.
|
2009-08-31 12:06:34 +00:00 |
|
nvt-se
|
ebd91b9f9d
|
Removed deprecated dir cache macro.
|
2009-08-30 20:36:32 +00:00 |
|
adamdunkels
|
b71faae330
|
ext-sensor: new driver for external sensors (e.g. Phidgets) on the Sentilla JCreate, developed by Marcus Lunden
|
2009-08-25 16:24:49 +00:00 |
|
nifi
|
e41de15c85
|
use nodeid 0 if no nodeid has been set
|
2009-08-24 15:44:45 +00:00 |
|
nvt-se
|
5e0d762e79
|
Call BIC_SR_IRQ to properly go switch of IRQ mode in the saved flag in the stack.
|
2009-08-17 11:32:17 +00:00 |
|
oliverschmidt
|
f606253f58
|
Minor adjustment to predominant coding style.
|
2009-08-09 20:51:19 +00:00 |
|
dak664
|
d5047f43c1
|
Change ip4 addresses to agree with wiki
|
2009-08-08 11:42:05 +00:00 |
|
dak664
|
283d288f1a
|
Allow hello-world to build, fix makefile ignoring rf230bb
|
2009-07-26 12:10:38 +00:00 |
|
dak664
|
8ea4b747d0
|
Add httpd_s* function layer and HTTPD_STRING_ATTR for strings in different memory types
|
2009-07-24 15:41:52 +00:00 |
|
dak664
|
a41efba6b4
|
Add makefsdata.h, remove httpd-fsdata.c, make now creates with /tools/ makefsdata.
|
2009-07-23 17:43:51 +00:00 |
|
dak664
|
928bbc206a
|
Add static coffee file system to webserver
|
2009-07-23 16:16:07 +00:00 |
|
dak664
|
c1b7375a5a
|
*** empty log message ***
|
2009-07-23 16:13:48 +00:00 |
|
nvt-se
|
34a6fc82a3
|
Backup all the infomem before erasing the segment. Thanks to Frederik Hermans for reporting this.
|
2009-07-21 16:56:33 +00:00 |
|
dak664
|
af981496b1
|
Optional complemented writes/reads and faster word reads
|
2009-07-15 22:10:08 +00:00 |
|
dak664
|
8e3c2e6334
|
Passed tests on Raven 1284p in 3 seconds with 56KB program memory disk
|
2009-07-14 19:23:22 +00:00 |
|
nvt-se
|
b0431cc688
|
removed obsolete offset type definitions.
|
2009-07-13 20:02:16 +00:00 |
|
ksb
|
292e69a468
|
Missing file
|
2009-07-11 15:23:24 +00:00 |
|
ksb
|
3c3714c178
|
Use IP over Rime
|
2009-07-11 15:07:59 +00:00 |
|
ksb
|
88669e1675
|
Test application for USB mass storage
|
2009-07-11 14:53:02 +00:00 |
|
matsutsuka
|
2aa41337bc
|
followed the name change of serial-line.c
|
2009-07-09 18:28:20 +00:00 |
|
matsutsuka
|
9a752dab15
|
aligned the usage of LOADER_UNLOAD macro with other sources
|
2009-07-09 18:24:56 +00:00 |
|
dak664
|
49989dbe45
|
Add rf230bb radio driver with conditional make on RF230BB=1
|
2009-07-08 15:26:17 +00:00 |
|
nifi
|
c436b99887
|
added configuration of MAC driver
added missing initialization of serial-line
added periodic DCO/CPU speed re-synch
|
2009-07-07 13:06:56 +00:00 |
|
nvt-se
|
1e0ca9ceac
|
Made the use of micro logs configurable to make file modifications
more efficient on storage types that support inline updates.
The sky platform uses logs, and the native platform uses no logs.
|
2009-06-29 13:30:16 +00:00 |
|
nvt-se
|
828439c922
|
code style compliancy
|
2009-06-29 12:46:49 +00:00 |
|
nifi
|
05d4bc4532
|
allow UIP_CONF_ROUTER to be set as compilation flag
|
2009-06-29 09:54:39 +00:00 |
|
joxe
|
1cc33ac451
|
configured routing to off for sky-IPv6
|
2009-06-26 12:01:23 +00:00 |
|
joxe
|
e16d4b0f06
|
fixed IPV6 flags for sky
|
2009-06-26 12:00:49 +00:00 |
|
nvt-se
|
b912a41ea3
|
use polite announcements when running Rime over UDP.
|
2009-06-24 16:44:26 +00:00 |
|
nifi
|
912aba7280
|
added init function in MAC driver for easier configuration
|
2009-06-22 11:14:11 +00:00 |
|
dak664
|
17da57e989
|
All static strings to flash, add wildcard to file-stats cgi
|
2009-06-19 17:11:28 +00:00 |
|
dak664
|
6c30271ade
|
Fix html compliance, use wildcard in file-stats cgi
|
2009-06-19 17:09:51 +00:00 |
|
nifi
|
16a9656abd
|
Bugfix: output function was not called with latest version of tcpip. Identified by Pierre de Vos.
|
2009-06-01 15:13:30 +00:00 |
|
nvt-se
|
a7faaa9aaa
|
a bit more documentation.
|
2009-05-26 14:34:22 +00:00 |
|
fros4943
|
300f3396ac
|
allow contiki motes to handle several contiki events each tick + corrected variables types
|
2009-05-26 14:08:51 +00:00 |
|
nvt-se
|
cd00bd3fdc
|
switched to calm mode as default.
|
2009-05-26 13:23:59 +00:00 |
|
nvt-se
|
06a2fc40ec
|
switched to 32-bit iteration variable for long-running tests.
|
2009-05-26 13:03:44 +00:00 |
|
nvt-se
|
0f6954cc43
|
added test options for stressing the card and for switching blocks randomly.
|
2009-05-26 13:00:37 +00:00 |
|
nvt-se
|
28619eabc0
|
bug fix with sdspi select.
code style fixes.
|
2009-05-26 13:00:07 +00:00 |
|
nvt-se
|
e9d279620f
|
more protection against interrupts that might spoil SPI sequences.
made coding style more like that of contiki.
|
2009-05-26 12:15:46 +00:00 |
|
nvt-se
|
09a1c115fe
|
initial test port of Coffee for the MSB-430 platform.
|
2009-05-25 14:14:32 +00:00 |
|
nvt-se
|
8f7f7fb896
|
enabled random I/O in the SD driver.
|
2009-05-25 14:13:47 +00:00 |
|
nvt-se
|
da91d87ae6
|
switch of interrupts while writing and reading to the SPI. avoids
desynchronization problems.
|
2009-05-25 13:19:04 +00:00 |
|
fros4943
|
faec70dee0
|
test app update: print sensor type
|
2009-05-19 17:54:08 +00:00 |
|
fros4943
|
d54176205c
|
decreased default elfloader memory usage for sky platform
|
2009-05-18 10:32:56 +00:00 |
|
nvt-se
|
bcc5084564
|
removed delay because while loop waits until completion anyway.
|
2009-05-15 13:54:08 +00:00 |
|
nvt-se
|
f9b35795c7
|
minor refactoring.
|
2009-05-14 12:18:49 +00:00 |
|
adamdunkels
|
bc6c9410cc
|
Print out the gateway's IP address more prominently
|
2009-05-12 17:32:49 +00:00 |
|
adamdunkels
|
00890caca8
|
Make sure that symbols.c is included in every native cpu build, not just the native target
|
2009-05-12 17:23:23 +00:00 |
|
nvt-se
|
74e9bc8789
|
Added flash reads and writes to energest.
|
2009-05-11 15:26:24 +00:00 |
|
adamdunkels
|
900480959b
|
Increased the default number of queue buffers: there usually is plenty of RAM left, so we should be able to afford it
|
2009-05-10 21:15:16 +00:00 |
|
joxe
|
6a7bc4c3a5
|
added mcu-chip temperature to accelerometer sensor - value 3
|
2009-05-08 16:03:50 +00:00 |
|
adamdunkels
|
6fcca2d545
|
Initialize ctimer, add IPv6 address configuration for the aaaa prefix
|
2009-04-29 11:49:27 +00:00 |
|
adamdunkels
|
e6215712ca
|
When a node is configured as an IP gateway, we switch off the power-saving MAC protocolto improve performance and to avoid problems with the serial communication that X-MACs use of rtimers can cause
|
2009-04-29 11:46:20 +00:00 |
|
adamdunkels
|
064f4488d4
|
Increase default CPU speed from 2.4576 MHz to 3.9 MHz. Communication works better, at a low power cost
|
2009-04-29 11:43:48 +00:00 |
|
adamdunkels
|
bbab7ba55c
|
When the tmote-bsl binary is found, program only one mote at once (parallel programming with tmote-bsl doesn't seem to work)
|
2009-04-29 11:42:56 +00:00 |
|
fros4943
|
9f299c277e
|
added experimental slip support for contiki motes
|
2009-04-23 09:15:51 +00:00 |
|
fros4943
|
9bd3d07510
|
implemented slip_arch_writeb() function
|
2009-04-23 09:02:06 +00:00 |
|
fros4943
|
b65014d1be
|
bugfix by Wolf-Bastian Pttner: check buffer size at incoming radio data
|
2009-04-16 14:38:41 +00:00 |
|
fros4943
|
bc6704079c
|
cc2420 checksums temporarily disabled, due to timing problems with the x-mac unicast optimization
|
2009-04-16 14:34:51 +00:00 |
|
adamdunkels
|
2e37fca49f
|
Check for tmote-bsl-linux binary under linux, and use it is available
|
2009-04-10 07:43:29 +00:00 |
|
adamdunkels
|
2545fd9069
|
Hack to make DS2411 ID useable as an Ethernet MAC address (remove multicast bit)
|
2009-04-10 00:40:08 +00:00 |
|
adamdunkels
|
3415ff26bd
|
Added CC2420 checksums to non-ipv6 packets. Set a conservative TCP MSS
|
2009-04-10 00:39:19 +00:00 |
|
nvt-se
|
172ffb74c7
|
fix compiler warnings. patch from Jesper Karlsson.
|
2009-04-08 14:56:00 +00:00 |
|
nifi
|
b41b79e3a9
|
Disable timestamp when using 802.15.4 frames (CC2420_CONF_TIMESTAMPS adds timestamp to radio packets).
|
2009-04-06 17:18:20 +00:00 |
|
nifi
|
900d8d8e17
|
changed to use HC01 compression for uip6
|
2009-04-06 16:01:11 +00:00 |
|
nifi
|
8b41f3a6a8
|
set rime addr size to 8 for uip6, restored clock resolution
|
2009-04-06 14:59:49 +00:00 |
|
nifi
|
76b7bf43d0
|
added setup for uip6 with 802.15.4 frames and routing using Rime
|
2009-04-06 14:12:58 +00:00 |
|
nifi
|
a36e529df1
|
added configuration for panid
|
2009-04-06 13:31:00 +00:00 |
|
nvt-se
|
f53560f6a5
|
enabled multihop routing, increased uip buffer size.
|
2009-04-06 13:23:14 +00:00 |
|
nifi
|
c1d490b6a7
|
added workaround for memcpy/memset bug in mspgcc
|
2009-04-06 13:07:37 +00:00 |
|
adamdunkels
|
58331e6802
|
Made tick resultion more fine-grained to support a shorter LPP listen time
|
2009-04-03 11:46:48 +00:00 |
|
fros4943
|
b730fb329d
|
changed upload rules due to problems on linux platforms
|
2009-04-02 11:15:30 +00:00 |
|
fros4943
|
3b3580e439
|
disabled writing IP addresses from inside COOJA, since the these should rather be determined by Contiki
|
2009-04-01 18:11:48 +00:00 |
|
fros4943
|
aa736322e1
|
removed unused uip/uaodv cooja comm stack. mesh-uip should be used instead
|
2009-04-01 17:17:55 +00:00 |
|
fros4943
|
3665422d8d
|
simplified cooja communication stacks initialization + added uipv6 stack
|
2009-04-01 13:50:12 +00:00 |
|
fros4943
|
6a99a82516
|
copied uipv6 configuration from native platform
|
2009-04-01 13:46:56 +00:00 |
|
fros4943
|
1c031504e5
|
no need to initialize serial line
|
2009-04-01 13:46:16 +00:00 |
|
fros4943
|
892bfb5678
|
moved radio-uip link functionality directly to comm stack sources
|
2009-04-01 13:45:41 +00:00 |
|
fros4943
|
eddd8350c5
|
renamed radio driver
|
2009-04-01 13:44:34 +00:00 |
|
fros4943
|
afed9bb2d0
|
icnlude packet radio by default
|
2009-04-01 13:39:54 +00:00 |
|
nifi
|
c6b15c289e
|
* show radio channel at startup
* only initialize timesynch when timesynch is enabled
|
2009-03-31 13:25:50 +00:00 |
|
nvt-se
|
e90149b7b4
|
avoid switching mode when tx or rx is active.
based on suggestions from Frederik Hermans and some code from Jesper Karlsson.
|
2009-03-30 14:07:34 +00:00 |
|
fros4943
|
5f1fda0406
|
removed unused variables + writing serial data in timeevent
|
2009-03-26 16:23:47 +00:00 |
|
fros4943
|
dda6de8438
|
+ clock stub functions
|
2009-03-26 16:22:36 +00:00 |
|
fros4943
|
ac22ad5081
|
changed the Makefile rules for uploading to sky-nodes.
the earlier approach caused problems sometimes, resulting in command succeeding without all nodes being reprogrammed
|
2009-03-26 13:29:44 +00:00 |
|
nvt-se
|
04bd414e1c
|
enabled LPP by default.
|
2009-03-26 12:51:55 +00:00 |
|
nvt-se
|
90b9b9bae3
|
configure LPP parameters with slightly longer listen time since the CC1020
driver switches from TX mode to RX mode rather slowly.
decreased CCA check timeout.
|
2009-03-26 12:47:12 +00:00 |
|
nvt-se
|
25cc327acc
|
avoid hanging in TX mode after CCA check failed.
minor memory savings.
|
2009-03-25 15:25:05 +00:00 |
|
nvt-se
|
96fbf3b853
|
use old style C comments.
convert printf to PRINTF.
remove unnecessary MS_DELAY calls from setupTX and setupRX.
|
2009-03-24 15:32:26 +00:00 |
|
nvt-se
|
15c447e57e
|
remove some unnecessary instructions and function calls. patch from Jesper Karlsson.
|
2009-03-24 15:13:11 +00:00 |
|
nvt-se
|
143c7f9cea
|
switched from serial to serial_line. patch from Jesper Karlsson.
|
2009-03-24 15:02:03 +00:00 |
|
fros4943
|
c76f34ff98
|
minor serial test application update
|
2009-03-21 15:47:40 +00:00 |
|
fros4943
|
9c9165dc90
|
start cooja with more memory to avoid outofmemory problems when running mspsim-based simulations
|
2009-03-20 13:23:44 +00:00 |
|
nvt-se
|
6b22fa60e8
|
- avoid costly rx state initialization if the radio is already on.
- code formatting.
|
2009-03-19 14:43:31 +00:00 |
|
nvt-se
|
8f85355f02
|
print the MAC protocol name when starting the node
|
2009-03-19 14:14:06 +00:00 |
|
nvt-se
|
b9ef907690
|
enable serial line tools using the same commands as the sky platform's Makefile
|
2009-03-17 22:27:14 +00:00 |
|
nvt-se
|
7e329ab467
|
removed obsolete file.
|
2009-03-17 22:20:04 +00:00 |
|
adamdunkels
|
b1cd9c207a
|
Removed serial.c, which is obsoleted by serial-line.c, which in turn now resides in Makefile.include
|
2009-03-17 21:51:13 +00:00 |
|
adamdunkels
|
727c5a2dbe
|
Renamed serial module to serial-line
|
2009-03-17 20:32:22 +00:00 |
|
adamdunkels
|
b20f0884ed
|
Renamed serial module to serial-line
|
2009-03-17 20:19:11 +00:00 |
|
adamdunkels
|
0076bfe8a5
|
Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy
|
2009-03-17 15:56:32 +00:00 |
|
nvt-se
|
7f3def31b7
|
removed duplicate inclusion of header, and sorted the entries.
|
2009-03-17 15:02:19 +00:00 |
|
nvt-se
|
6d0fc26ec1
|
disabled unstable SD driver.
|
2009-03-17 15:01:40 +00:00 |
|
fros4943
|
d6ebba536c
|
minor 64 bit fix: divide by sizeof(unsigned long) instead of constant 4
|
2009-03-13 14:40:07 +00:00 |
|
adamdunkels
|
65eb5fd4e8
|
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
|
2009-03-12 21:58:20 +00:00 |
|
dak664
|
932fc9f748
|
Remove tab that was preventing cgi invokation
|
2009-03-12 21:37:22 +00:00 |
|
adamdunkels
|
5920a86312
|
Moved the Raven-specific applications from the generic apps/ directory to the platform-specific platform/avr-raven/apps
|
2009-03-12 19:15:23 +00:00 |
|
fros4943
|
99b9e80de9
|
make all quickstart target phony
|
2009-03-12 17:48:23 +00:00 |
|
fros4943
|
72fdf5b379
|
make quickstart goal precious
|
2009-03-12 15:12:50 +00:00 |
|
fros4943
|
063bf88f90
|
cooja quickstart should be started from normal cooja working directory, otherwise config relative paths won't work
+
cygwin path fix for quickstart
|
2009-03-12 13:04:10 +00:00 |
|
nvt-se
|
80bbc92ffe
|
patch from Jesperk Karlsson. ensures that the fp_uart_handler type is known
in the header.
|
2009-03-12 12:23:22 +00:00 |
|
fros4943
|
5d27841807
|
+ contiki app object
|
2009-03-11 08:40:37 +00:00 |
|
fros4943
|
bcb34297df
|
reimplemented quickstart functionality
|
2009-03-11 07:45:54 +00:00 |
|
fros4943
|
0bc10750bc
|
added rule for .cooja target.
compiling for cooja is now similar to other platforms, for example:
make hello-world.cooja TARGET=cooja
|
2009-03-10 21:23:38 +00:00 |
|
julienabeille
|
0395ff5f39
|
sicslowpan Typo
|
2009-03-09 08:19:07 +00:00 |
|