George Oikonomou
6e7d52b5df
Improve MPU power-cycling logic:
...
* Keep MPU_PWR low when the sensor is not in use
* Deselect the sensor when not in use, in order to restore the I2C ping state
* Explicitly control the MPU_INT pin
* Don't shutdown the sensor when it's shut down
* Remove explicit shutdown-related API extension. It is no longer required
2015-05-15 09:21:04 +01:00
George Oikonomou
dcf0d11050
Re-map tag UART-related IOID defines
2015-05-15 09:21:03 +01:00
George Oikonomou
2cc59c524a
Configure pins for unused tag peripherals
2015-05-15 09:21:03 +01:00
George Oikonomou
e893c914b6
Set SPI pins to a low leakage state
2015-05-15 09:21:03 +01:00
George Oikonomou
421fbfae25
Change the LPM locks API:
...
Instead of using a separate data structure to request that a PD remain powered during deep sleep,
we do the same within the main LPM data structure through an additional field.
This allows us to maintain only one linked list of LPM modules and overall improves code clarity
2015-05-15 09:21:02 +01:00
George Oikonomou
0e92b508b3
Don't clock GPT0 on device startup
2015-05-15 09:21:02 +01:00
George Oikonomou
6611acadc7
Don't fire-up SERIAL automatically
2015-05-15 09:21:02 +01:00
George Oikonomou
34be012661
Improve I2C power-cycling logic:
...
We only power, clock and enable the peripepheral when / if we need it
* We no longer automatically turn on the SERIAL PD when the CM3 is running
* Make sure the I2C peripheral is accessible (powered and clocked) before any operation
* If the peripheral is not accessible, automatically power it up and run the clock
* Put SDA, SCL, SDA HP and SCL HP in a low-leakage state when shutting down
* Don't automatically fire up the I2C controller when we wake up
2015-05-15 09:21:02 +01:00
George Oikonomou
0ad4b5f323
Add the ability to put the I2C in a known/default state
2015-05-15 09:21:01 +01:00
George Oikonomou
d1a1c16bd0
Define pins for more sensortag peripherals
2015-05-15 09:21:01 +01:00
George Oikonomou
4378217462
Improve sensortag external flash power management:
...
* Explicitly put in deep sleep on device startup
* Verify that the flash has actually dropped to deep sleep
* Update CLK pin to match the one used on the v1.2 sensortag
Obsoletes and Closes #988
2015-05-15 09:21:01 +01:00
George Oikonomou
cf99160706
Change lpm_shutdown() API call:
...
So that the caller can specify pin pull and wakeup state
2015-05-15 09:21:01 +01:00
George Oikonomou
5644e95fb6
Fix global interrupt manipulation
2015-05-15 09:21:00 +01:00
George Oikonomou
3f310e462f
Tidy-up clock configuration
2015-05-15 09:20:59 +01:00
George Oikonomou
450550a7d1
Explicitly configure Srf pins for unused peripherals
2015-05-15 09:20:59 +01:00
George Oikonomou
7a189d010b
Don't power on SERIAL in the Srf's board_init
2015-05-15 09:20:59 +01:00
George Oikonomou
00a6c31158
Improve OPT sensor driver and usage
...
* Query the sensor about its state, rather than using variables in the driver
* Correctly put the sensor to deep sleep
* Fix doxygen comments
* Don't turn off the sensor in examples since it is no longer needed
2015-05-15 09:20:59 +01:00
George Oikonomou
3ab1b836c4
Configure button pins with hysterisis
2015-05-15 09:20:58 +01:00
George Oikonomou
7641aa89f2
Tidy-up macro semicol usage
2015-05-15 09:20:58 +01:00
George Oikonomou
0b6813513c
Undefine CTS/RTS pins for the SmartRF
2015-05-15 09:20:58 +01:00
George Oikonomou
883c30b4ac
Handle the configuration of the TMP_RDY pin
2015-05-15 09:20:58 +01:00
George Oikonomou
cee6c190c5
Use the BMP in 'forced' mode and reduce startup delay
...
In forced mode, the BMP will turn itself off after a reading
2015-05-15 09:20:57 +01:00
Antonio Lignan
b50ae639b3
Merge pull request #986 from g-oikonomou/cc26xx-hdc-sensor
...
Replace STH21 with HDC1000 for the CC2650 SensorTag
2015-05-15 10:12:08 +02:00
Benoît Thébaudeau
c9324d133f
Merge pull request #1060 from g-oikonomou/cc26xx/contrib/ihex
...
Produce ihex files usable with TI's Flash Programmer
2015-05-14 19:24:36 +02:00
Benoît Thébaudeau
d64927397f
Merge pull request #968 from g-oikonomou/cc2538-contrib-on-chip-sensors
...
Move CC2538 VDD/3 and On-Chip Temp sensors to the CPU dir
2015-05-14 19:21:56 +02:00
Benoît Thébaudeau
71f22b1775
Merge pull request #966 from g-oikonomou/cc2538-startup-to-cpu-dir
...
Move cc2538 startup-gcc.c to the CPU dir
2015-05-14 18:43:39 +02:00
George Oikonomou
69c4f19336
Produce ihex files usable with TI's Flash Programmer
2015-05-14 13:22:11 +01:00
George Oikonomou
6507112b33
Remove SHT21 sources
2015-05-14 13:20:40 +01:00
George Oikonomou
d5f458509d
Adjust the CC26xx README to reflect new sensors
2015-05-14 13:20:39 +01:00
George Oikonomou
1384030d6e
Replace SHT21 with HDC1000 driver in the tag build
2015-05-14 13:20:39 +01:00
George Oikonomou
7e3b8d6fcc
Add a driver for the HDC1000 sensor
2015-05-14 13:20:39 +01:00
George Oikonomou
a32598f658
Merge pull request #1059 from g-oikonomou/cc26xx/contrib/xxware-instructions
...
Update CC26xxware download instructions
2015-05-13 12:21:48 +01:00
George Oikonomou
96e1647270
Move cc2538 startup-gcc.c to the CPU dir
2015-05-13 01:31:10 +01:00
George Oikonomou
4de471478a
Link and build tmp, vdd and als sensors
2015-05-12 23:42:20 +01:00
George Oikonomou
12ac8e1fb5
Initialise ADC in main, not in sensor drivers
2015-05-12 23:42:20 +01:00
George Oikonomou
3717522680
Re-work the CC2538 driver to be a driver for the Srf06 ALS only
2015-05-12 23:42:19 +01:00
Nicolas Tsiftes
44af0fa66b
Merge pull request #1003 from adamdunkels/pr/http-socket-dns64-tcp-socket
...
New HTTP socket, DNS64, IP64 Cooja tests
2015-05-10 17:14:31 +02:00
George Oikonomou
351b16c43c
Update CC26xxware download instructions
2015-05-10 14:53:05 +01:00
Adam Dunkels
64bae5b38d
Include the ip64-addr module, to make http-socket compile
2015-05-10 10:51:12 +02:00
Adam Dunkels
4a85d49a09
Include a subplatform-conf.h, which may override configuration parameters set by the cooja/contiki-conf.h
2015-05-10 10:51:12 +02:00
Adam Dunkels
81391c11a7
Need to specify the target name, which allows us to have platforms that inherit from the cooja platform, like the cooja-ip64 platform
2015-05-10 10:51:12 +02:00
Adam Dunkels
bab1c48912
New Cooja platform designed for runnig IP64 routers for automated testing
2015-05-10 10:51:11 +02:00
George Oikonomou
447be526ae
Merge pull request #1046 from g-oikonomou/cc26xx/contrib/slip-and-br
...
Enable slip-radio and rpl-border-router for CC26xx
2015-05-09 22:51:06 +01:00
George Oikonomou
598fd770b8
Merge pull request #960 from g-oikonomou/travis-arm-aapcs-tests
...
Test cc2538dk with the recommended toolchain
2015-05-09 22:31:18 +01:00
George Oikonomou
bd5e35c968
Merge pull request #1052 from simonduq/packetbuf-cleanup
...
Packetbuf cleanup
2015-05-09 22:30:21 +01:00
Simon Duquennoy
bb76bb8beb
Remove unused flag SICSLOWPAN_CONF_ACK_ALL. Include packetbuf attribute PACKETBUF_ATTR_RELIABLE only when RIME is compiled.
2015-05-06 16:34:26 +02:00
George Oikonomou
d808978149
Improve platform README
2015-05-03 22:36:04 +01:00
George Oikonomou
0327eea109
Printf Driverlib version at startup
2015-05-03 22:36:04 +01:00
George Oikonomou
77874dc02b
Remove unused configuration defines
2015-05-03 22:36:03 +01:00
George Oikonomou
f83c4e7286
Improve code style
2015-05-03 22:36:03 +01:00
