dak664
b438b78097
Fix configuration for RPL build (no packet queuing, default no TCP)
2010-12-18 22:37:02 +00:00
dak664
9575daede2
Add working cx-max configuration values.
2010-12-18 20:53:36 +00:00
dak664
aa7ad8c807
Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan.
2010-12-15 16:50:44 +00:00
dak664
ced88c2eff
Give jackdaw fe80::0 address and number webservers from fe80::1
2010-12-14 23:22:01 +00:00
dak664
1d2a5ca671
Minor format and comment changes
2010-12-14 22:51:04 +00:00
dak664
d8fe44645c
Refactor, tune, add SICSLOWPAN_CONF_ACK_ALL defines for testing radio acks
2010-12-14 22:39:38 +00:00
dak664
a9dedfee4f
Refactor contiki-conf files, remove obsolete defines.
2010-12-13 23:31:13 +00:00
dak664
35b2ce0cdb
Add status page link, show correct rssi, fix indexing off array in ipv4 builds
2010-12-04 21:32:35 +00:00
dak664
58b7a19803
Hardware/software radio HAL patch from Roger Larsson.
...
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664
3d3ad9e2c2
Fixes to allow ipv4 (hello world) builds
2010-12-01 16:23:55 +00:00
dak664
5a4fa388da
Refuse to play ping-pong with host interface
2010-11-29 21:22:41 +00:00
dak664
0735b431aa
Enable RPL neighbor webserver page
2010-11-29 21:21:36 +00:00
dak664
dc028b3f85
Get rssi correctly in either rx mode, clean up radio driver debugging
2010-11-26 20:39:15 +00:00
dak664
880233a451
RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing.
2010-11-24 18:46:57 +00:00
dak664
da8ad17c02
Save 256 bytes of RAM by excluding floating point routine
2010-11-21 17:56:36 +00:00
dak664
b3324c6d23
Add menu option to temporarily disable RS232 debug output for higher 6lowpan throughput.
...
Functional rpl with RNDIS/Ubuntu (tested on Raven single hops)
2010-11-19 20:02:25 +00:00
dak664
fe19719a16
Fix printf_P error
2010-11-18 14:33:10 +00:00
dak664
cc7fea92d2
Force ipv6 when building with fakeuip
2010-11-13 16:28:46 +00:00
dak664
72d49c20af
Allow non-ipv6 build (hello world)
2010-11-12 20:49:03 +00:00
dak664
acd9d516d8
Add RPL neighbors and routes printout to Jackdaw menu
2010-11-05 20:35:15 +00:00
dak664
9194b3ac69
Fix error when RS232 not enabled
2010-10-28 19:31:28 +00:00
dak664
ad6712736b
Fix Windows XP RNDIS+CDC serial port enumeration
2010-10-28 19:30:14 +00:00
dak664
258e3cc93a
Allow simultaneous use of RS232 and USB serial ports
2010-10-27 14:51:20 +00:00
dak664
123e3cae41
Fix compiler warnings
2010-10-23 15:26:46 +00:00
adamdunkels
5585d72c86
A simple but substantial change: uIP used the htons()/HTONS() macro
...
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.
This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
2010-10-19 18:29:03 +00:00
dak664
110bc0242e
Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum
2010-09-17 21:59:09 +00:00
dak664
dc9f16131c
Make fake routines conditional on CONTIKI_NO_NET
2010-09-14 19:16:53 +00:00
dak664
6d3c276e7e
Add rpl configuration and webserver options.
2010-09-14 19:13:05 +00:00
dak664
b9b4f07ad9
Add internal webserver option
2010-09-14 17:03:29 +00:00
dak664
0858f71e6a
Add rpl webserver option
2010-09-14 16:59:44 +00:00
dak664
3bee71ad81
Add simple webserver for RPL status
2010-08-26 18:55:43 +00:00
dak664
885fee3561
Add RPL border router process
2010-08-06 17:39:31 +00:00
dak664
b706c48efd
Add experimental RPL code
...
Change RF channel to 26 for econotag compatibility
2010-08-03 19:55:42 +00:00
dak664
08897e1c1f
Add explicit queuebuf and packetbuf to build
2010-06-22 17:10:24 +00:00
joxe
c4278dedc2
replaced uip_buf with the new uip_aligned_buf
2010-06-03 11:37:50 +00:00
dak664
6909f291af
Use siimple ethernet address translation for RF230BB by default.
...
That gets pings and webserver working again for Vista and W7.
Hopefully it won't break something that already works...
2010-05-08 17:17:17 +00:00
dak664
f03600d4e3
update to uip-ds6.c
2010-03-18 14:36:00 +00:00
dak664
cae40439d7
Add optional RS232 debugging
2010-03-15 18:56:13 +00:00
dak664
d3697344ec
Update for NETSTACK_CONF_FRAMER
2010-03-02 16:25:47 +00:00
dak664
feb6aa0ed2
Change back to SICSLOWPAN_COMPRESSION_HC06 from SICSLOWPAN_COMPRESSION_HC01
2010-02-28 21:39:40 +00:00
dak664
39e6f6a830
Clean up, functional webserver for further testing of low power protocols
2010-02-28 21:29:19 +00:00
c_oflynn
b5b77ac47a
Use new HC06
2010-02-26 10:55:00 +00:00
dak664
64d57a3dd8
Update jackdaw to new radio driver interface
2010-02-23 17:35:49 +00:00
dak664
a64a8674bc
Remove debug print
2010-02-23 02:22:25 +00:00
dak664
6df1e0ca58
add experimental cxmac code
2010-02-18 17:24:12 +00:00
dak664
72e1528ea7
Make sicslowmac the default!
2010-02-16 23:42:06 +00:00
dak664
53801ffbb1
Add optional RF230BB radio driver
2010-02-16 22:17:51 +00:00
dak664
1bdff78e6e
Remove compiler warnings
2010-02-15 20:54:37 +00:00
dak664
e12e794a74
QUEUEBUF fragmentation defines
2010-02-08 22:22:27 +00:00
c_oflynn
95d0b09954
-Fix that can cause USB stick to freeze up
...
-Add EEM Support
2010-02-04 10:40:00 +00:00
