Commit Graph

221 Commits

Author SHA1 Message Date
fros4943
3033201d24 longer send period + forcing example to wait until an ongoing transmission is finished before initiating a new transmission 2008-11-11 13:50:21 +00:00
fros4943
92ecda2202 using the same addresses in both netsim and non-netsim 2008-11-11 11:25:39 +00:00
oliverschmidt
57f8e86532 Minor formatting change. 2008-11-10 22:47:10 +00:00
oliverschmidt
c109e102c4 Include wget shell command in "standard" shell environments. 2008-11-10 22:10:32 +00:00
adamdunkels
de601c9523 Added battery voltage level readout & SHT11 low-voltage indicator 2008-11-10 21:14:20 +00:00
adamdunkels
5e772838eb Remove debug printouts. Increase neighbor advertisement timers. 2008-11-06 08:24:20 +00:00
adamdunkels
2ac1c3e231 avr-raven needs to be built with uIPv6 - this should hopefully fix the nightly builds 2008-10-30 21:28:20 +00:00
adamdunkels
de084cecfb Corrected mistake in the avr makefile target 2008-10-17 20:23:32 +00:00
adamdunkels
e3c1d488be Added avr-raven to compilation targets 2008-10-17 17:55:13 +00:00
nvt-se
ea9c3ab98c allow in-page offets 2008-10-16 10:14:41 +00:00
c_oflynn
778f51f445 Change makefile to build with just 'make' 2008-10-15 20:52:03 +00:00
mdurvy
33f9b07915 warning for prefix lifetimes 2008-10-15 08:55:25 +00:00
c_oflynn
1726c10a46 Forgot these files! 2008-10-14 22:04:16 +00:00
c_oflynn
d5865cb2b6 -Change needed for ravenusb to build
-Reverts Makefile.include back to 1.57, then apply the needed change
2008-10-14 20:31:46 +00:00
c_oflynn
a520fe4646 Lots of changes / commits! This allows ravenusbstick example to build at least. 2008-10-14 19:06:51 +00:00
julienabeille
2238f2e7da Debugged autoconf for ethernet 2008-10-14 16:50:11 +00:00
julienabeille
f5f0044578 examples for uIPv6 2008-10-14 10:01:52 +00:00
fros4943
27bc3f771a printing message when packet sent
+ changed period to 2 seconds (can be run unchanged with x-mac)
2008-10-02 21:08:58 +00:00
nvt-se
3c5ed37751 basic tests of Coffee. 2008-09-18 10:35:30 +00:00
nifi
4206ff28a2 Fixed problem with programming Sky nodes using the Java interface under Linux 2008-09-03 13:35:21 +00:00
nifi
822726f817 Added system time when the sensordata is received at the base station and fixed sensor data log to be flushed. 2008-08-29 10:00:23 +00:00
nifi
ec69c1c825 Added menu option to send init script to nodes. Added charts 'Average Power' and 'Average Temperature'. Limited the number of displayed chart items to 250 in the time charts 2008-08-29 09:00:15 +00:00
nifi
71c219f5fc added option to limit the number of displayed chart items 2008-08-29 08:42:30 +00:00
nifi
dbde68654a Only show nodes with sensor data by default 2008-08-28 07:32:24 +00:00
adamdunkels
9f9ba7d6d9 Added the 6502 targets to the default nightly build checks 2008-08-19 09:20:27 +00:00
oliverschmidt
59c5d05388 Presuming that all platforms based on a certain cpu should be listed here... 2008-08-17 09:56:58 +00:00
adamdunkels
96c47c8ef8 Prepared for automatic cc65 compilation 2008-08-16 13:08:36 +00:00
adamdunkels
d0f8770263 Bugfix: dates are now correctly displayed. Capped humidity values at 100% 2008-08-15 18:47:13 +00:00
adamdunkels
46b824d80f Enable rime debug commands (broadcast, unicast) 2008-08-15 18:46:28 +00:00
adamdunkels
5991bc0d67 Milliseconds -> seconds 2008-07-10 20:05:09 +00:00
nifi
c4b197a2a4 added option to program Sky nodes from the Java interface 2008-07-10 14:52:59 +00:00
nifi
e75579623a setup library for tools 2008-07-10 00:23:30 +00:00
nifi
09197c7ad0 moved range configuration to initialization 2008-07-10 00:19:20 +00:00
nifi
5c37342e14 bug fix 2008-07-09 23:33:33 +00:00
nifi
0fa1ae0fce Java interface using the shell to collect and visualize sensor values from Sky nodes 2008-07-09 23:18:05 +00:00
nifi
551056f263 updated for the latest CC2420 api 2008-07-09 21:49:20 +00:00
adamdunkels
d89256c272 Changed from shell app to serial-shell app 2008-07-09 20:57:58 +00:00
adamdunkels
329cea44d7 Replaced the sky-shell with the new sky-shell-collect and removed sky-shell-collect 2008-07-09 20:39:27 +00:00
nifi
e92b7178b9 fixed compiler warning 2008-07-08 12:54:41 +00:00
adamdunkels
082efade5b Removed netfile command, added net debug commands 2008-07-07 23:45:35 +00:00
adamdunkels
10f3964be1 Added an AJAX-style web server app that continously updates a web page with data from the Tmote Sky on-board sensors 2008-07-07 23:42:32 +00:00
adamdunkels
b88b231c62 Removed ps command to make code fit in memory 2008-07-04 00:01:06 +00:00
adamdunkels
93ce938d8d enable coffee code coffee and netcmd commands 2008-07-03 23:32:03 +00:00
adamdunkels
aed5ea1720 Bugfix in netsend commands 2008-07-03 23:31:38 +00:00
adamdunkels
4687c2c948 Renamed Rime module mh to multihop 2008-07-03 22:36:02 +00:00
adamdunkels
c2c3835110 Changed name of Rime module ruc to unicast 2008-07-03 21:52:25 +00:00
adamdunkels
8b91a56a4e Added target for sky-shell-collect.c data collection 2008-07-03 18:48:53 +00:00
adamdunkels
96fb8163e6 Shell program that sends a lot of data: sensor data, power data, neighbor data 2008-07-03 18:40:18 +00:00
adamdunkels
da4803e4d4 Updated window title and heading 2008-07-02 14:12:48 +00:00
adamdunkels
66876625d4 Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*. 2008-07-02 09:05:40 +00:00
adamdunkels
1586d8f36f Changed filename of the CC2420 driver from simple-cc2420 to cc2420. 2008-07-01 21:02:51 +00:00
adamdunkels
63c620303a Changed the 'ibc' and 'uc' Rime modules into the more descriptive names 'broadcast' and 'unicast' 2008-06-26 11:19:22 +00:00
adamdunkels
61bd8009f1 Reverted mistake commit 2008-06-02 08:42:34 +00:00
adamdunkels
199a14150b Removed redundant targets 2008-05-29 20:30:44 +00:00
adamdunkels
cbca96c545 Example code for multi-hop Tmote Sky telnet server and web server 2008-05-29 20:17:48 +00:00
oliverschmidt
4dcbc3273e Now that we started adding files to the CVS which are normally generated with a 'save...' make goal we can remove the DEFAULT_TARGET mechanism altogether and just add Makefile.target files. 2008-05-26 10:09:12 +00:00
oliverschmidt
1cab294517 The Contiki 2.x build system allows to define arbitrary macros for the C compiler preprocessor (in other word add -d<macro[=value]>'s to the C compiler command line) directly from the gnumake command line by setting the gnumake variable DEFINES to a comma-seperated list of macros (and optionally values) like this:
make TARGET=mytarget DEFINES=MYLOG, MYSIZE=100, MYTRACE

The build system does however _NOT_ take care to rebuild things if the DEFINES change so most likely a 'make clean' is advisable. To ease usage the DEFINES may be saved individually per target with the goal 'savedefines' similiar to savinf the target.

The 6502-based target leverage the DEFINES mechanism by introducing so-called 'high level config macros' which allow to configure Contiki per target AND per project.

Most of the time there's exactly one reasonable set of high level config macros for every combination of target and project. Therefore it makes sense to place them into CVS.
2008-05-26 09:28:28 +00:00
oliverschmidt
8248685dcf Not all targets support stdio. There I replaced stdio output with log output (and streamlined the source). 2008-05-26 09:12:22 +00:00
oliverschmidt
b2810f02e1 Many project Makefiles build just one Contiki binary. Up to now the name of this binary was only available to the 'all' goal as prerequisite. So it was possible to create a non-project-specific rule to i.e. load that binary into the target device.
Therefore I introduced the make variable CONTIKI_PROJECT. Now a typical project Makefile starts with:

CONTIKI_PROJECT = hello-world
all: $(CONTIKI_PROJECT)
2008-05-26 07:37:24 +00:00
oliverschmidt
ad7ad61482 Added some sample content for the webserver example using CFS. 2008-05-21 07:43:53 +00:00
joxe
7722a73abf modified API for fft 2008-04-25 22:12:25 +00:00
joxe
faf0f2ea0a added fft test program sampling using the esb-mic. 2008-04-25 16:34:31 +00:00
fros4943
e9f8102fec added netsim address style support 2008-04-24 11:50:04 +00:00
fros4943
01fba84c16 sending from node 2 to node 1 2008-04-24 11:41:50 +00:00
zhitao
23d437e656 synched with the new mac->off function parameter 2008-04-16 10:49:50 +00:00
oliverschmidt
12f6b3c206 Removing (the now obsolete) tcpip_set_forwarding(0) shouldn't hurt. 2008-03-29 15:20:48 +00:00
oliverschmidt
0fc8481f15 As adding some commands to the telnet server shell doesn't seem to be desirable in the application it's now done in the example. 2008-02-28 23:12:47 +00:00
thiemovoigt
f464ae3cc4 update to conform to newer Contiki, in particular set_channel stuff 2008-02-25 12:04:41 +00:00
thiemovoigt
b79cb25ccd update to conform to newer Contiki, i.e. set_channel for radio 2008-02-25 12:03:25 +00:00
adamdunkels
8f6d2d6c3f Added simple-cc2420 include, added argument to mac->off() 2008-02-24 22:27:41 +00:00
adamdunkels
ad2a8e5e97 Changed all occurences of u8_t and u16_t to uint8_t and uint16_t 2008-02-24 22:15:46 +00:00
adamdunkels
17f13e38e8 TCP/IP-networking examples for the Tmote Sky platform 2008-02-24 21:33:57 +00:00
oliverschmidt
2632f8f937 Removed finally unnecessary cast. 2008-02-10 22:36:36 +00:00
adamdunkels
136ad1e48c Example application that runs the Contiki shell on the Tmote Sky 2008-02-04 23:52:33 +00:00
adamdunkels
44d7d9a9a4 Changed names of the Rime examples from test-* to example-* and added examples for ruc and uc 2008-01-25 18:00:50 +00:00
adamdunkels
68523814c5 Moved from examples/sky into generic platform/sky/apps so that all examples can use it 2008-01-23 20:34:37 +00:00
zhitao
10ce1ed03e Pulled in updated defines for the sky platform 2008-01-22 15:00:24 +00:00
zhitao
b9c34bf835 Removed redundant initialization 2008-01-22 14:58:41 +00:00
nifi
3739cd8eea corrected comment 2008-01-10 13:40:20 +00:00
nifi
75784e2314 simple application to indicate connectivity between two nodes 2008-01-10 09:59:33 +00:00
adamdunkels
df9d43c62d Fixes to total power plot generation 2008-01-08 08:28:09 +00:00
adamdunkels
ff42002bc5 Added extraction of power data (not just energy) 2008-01-08 08:07:23 +00:00
adamdunkels
bfd894c7bd Made graphs nicer by using gnuplot's mulitplot functionality, added power graph 2008-01-08 08:06:41 +00:00
adamdunkels
12bbe80003 Added timestamps and radio signal noise measurements 2008-01-08 08:05:34 +00:00
adamdunkels
b71224b438 tree.h -> collect.h 2007-12-16 14:37:02 +00:00
oliverschmidt
4ffca4c3b8 Introduced web browser as new example using ctk fullscreen mode. 2007-12-15 22:05:34 +00:00
nifi
a8313c3b39 removed unused include 2007-11-29 10:29:03 +00:00
nifi
242c88497a Rime port of the radio test 2007-11-28 23:10:38 +00:00
nifi
1c5fd0aa86 fixed compiler warning 2007-11-28 20:31:30 +00:00
nifi
1c7c74a6ad replaced blink with blinker that uses more sensors 2007-11-28 20:28:56 +00:00
adamdunkels
20cab2ba22 Print out system and c compiler version 2007-11-28 20:05:51 +00:00
adamdunkels
8d96443a3b A set of scripts for producing plots from the output of the sky-collect program 2007-11-28 16:56:37 +00:00
adamdunkels
1b659316b7 Updated to use the 'collect' module instead of the old 'tree' module 2007-11-28 16:52:22 +00:00
adamdunkels
6dfeb266ff Fixed to use the 'collect' module instead of the 'tree' module 2007-11-28 16:05:32 +00:00
adamdunkels
13ca6c9946 It now says if it succeeded as well as failed 2007-11-28 12:53:39 +00:00
nifi
8cf6ac9212 ESB examples 2007-11-27 22:32:38 +00:00
adamdunkels
0074e4248b Fixed problem that made error output not visible 2007-11-27 21:58:07 +00:00
adamdunkels
64a2602183 Makefile for compiling a set of Contiki platforms and produce error messages for those platforms that do not compile 2007-11-27 20:50:54 +00:00
adamdunkels
a677abb6b1 Fixed compiler warning 2007-11-26 23:36:09 +00:00
adamdunkels
4edbad10a7 Fixed so that it runs with multiple Tmote Sky boards attached; it now uses the first one 2007-11-26 23:34:52 +00:00