Commit Graph

11618 Commits

Author SHA1 Message Date
Atis Elsts
e233c3f27f cc26xx: change CCA logic to be standard-compatible; change receiving_packet to return true iff sync (SFD) has been seen 2016-06-14 00:54:33 +03:00
Atis Elsts
d85667d535 cc26xx: packet queue changes: allow to read packets after radio has been turned off; make pending_packet() return true when there is a packets being received 2016-06-14 00:54:33 +03:00
Atis Elsts
54e4b5f351 cc26xx: allow IEEE 802.15.4 frames with version 2, required for TSCH 2016-06-14 00:54:33 +03:00
Atis Elsts
80aa30c5da cc26xx: add support for RADIO_PARAM_TX_MODE getting and setting and for LAST_RSSI and LAST_LQI reading 2016-06-14 00:54:33 +03:00
Atis Elsts
25c5f0b744 cc26xx: implement support for CC2650_FAST_RADIO_STARTUP 2016-06-14 00:54:33 +03:00
Atis Elsts
97c1cfc3b4 cc26xx: return the expected value 0 from prepare() in ieee and prop mode radio 2016-06-14 00:54:33 +03:00
Atis Elsts
e19fbc996e cc26xx: use CMD_IEEE_MOD_FILT to change address filtering instead of fully restarting the radio 2016-06-14 00:54:33 +03:00
Atis Elsts
3a99639294 cc26xx: implement CC2650_FAST_RADIO_STARTUP option, required for TSCH 2016-06-14 00:54:33 +03:00
Atis Elsts
a47fb723e4 cc26xx: enable sync between radio timer and RTC, useful for TSCH 2016-06-14 00:54:33 +03:00
Atis Elsts
95b66657aa cc26xx: add TSCH-related rtimer defines 2016-06-14 00:54:32 +03:00
Atis Elsts
ac6f8008fd cc26xx: implement poll mode, hardware timestamps, and other minor changes in the IEEE radio driver 2016-06-14 00:54:32 +03:00
Atis Elsts
3ff8aa8ad8 srf06-cc26xx: add node_id variable 2016-06-14 00:54:32 +03:00
Atis Elsts
f99511f494 srf06-cc26xx: add default TSCH configuration for the platform 2016-06-14 00:54:32 +03:00
Simon Duquennoy
30e820ffa5 Merge pull request #1708 from atiselsts/tsch_enhancements
TSCH enhancements
2016-06-13 20:58:02 +02:00
George Oikonomou
4b67e21d2e Merge pull request #1714 from alignan/pull/add-relay
Added generic relay driver for the zoul-based platforms
2016-06-13 19:45:46 +01:00
Simon Duquennoy
4fd8f67053 Merge pull request #1715 from sumanpanchal/zoul-tsch
TSCH port for Zolertia ReMote/Zoul.
2016-06-13 09:03:16 +02:00
Sumankumar Panchal
373fda46f7 TSCH port for Zolertia ReMote/Zoul. 2016-06-12 16:37:01 +05:30
George Oikonomou
80e4ca7802 Merge pull request #1718 from bthebaudeau/print-cc2538-info-on-boot
Print CC2538 info on boot
2016-06-12 00:27:31 +01:00
Benoît Thébaudeau
9845973971 cc2538: Print SoC information upon startup
If STARTUP_CONF_VERBOSE is enabled, print SoC information upon startup.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-11 23:23:38 +02:00
Benoît Thébaudeau
b655d92aa4 cc2538: Provide SoC information
Add functions providing the SoC revision, SRAM size, and enabled
hardware features, as well as a function printing SoC information.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-11 23:23:38 +02:00
Benoît Thébaudeau
b3ea790449 cc2538: sys-ctrl: Provide last reset cause
Add functions providing the last reset cause, one as an integer (ID),
and one as a string.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-11 23:23:38 +02:00
Atis Elsts
f0fcff2d1a TSCH: declare radio_rx_mode only when HW timestamps are enabled to avoid warnings 2016-06-10 15:04:07 +03:00
Atis Elsts
5b728691ad TSCH: add missing include 2016-06-10 15:04:07 +03:00
Atis Elsts
fbb66f9cd5 TSCH: allow to configure channel scanning duration during the join phase 2016-06-10 15:04:07 +03:00
Atis Elsts
b57009e564 TSCH: fix signedness in adaptive timesync 2016-06-10 15:04:07 +03:00
Atis Elsts
03d511c2be tsch-slot-operation.c: use ABS() instead of abs() for consistency with the rest of Contiki 2016-06-10 15:04:06 +03:00
Atis Elsts
f6967c1f58 read RADIO_PARAM_LAST_RSSI and RADIO_PARAM_LAST_PACKET_TIMESTAMP only after the last packet has been read in TSCH: reading the packet might update these values 2016-06-10 15:04:06 +03:00
Atis Elsts
45510f57fa TSCH: add option to not to turn off radio during active TSCH timeslots 2016-06-10 15:04:06 +03:00
Atis Elsts
723c7e1117 print TSCH clock drift ppm whenever updated 2016-06-10 15:04:06 +03:00
Atis Elsts
b3afd65b1d fix a few comments in TSCH 2016-06-10 15:04:06 +03:00
Atis Elsts
0cb222e6e1 add 2-channel TSCH hopping sequence 2016-06-10 15:04:06 +03:00
Nicolas Tsiftes
8e6c6cc45b Merge pull request #1687 from tsparber/fix-rpl-ex-header-len-unit
rpl-ext-header: Use 8-octet unit for HBHO length
2016-06-09 16:28:27 +02:00
Antonio Lignan
092f0e62fe Added generic relay driver for the zoul-based platforms 2016-06-09 15:53:25 +02:00
Tommy Sparber
27cceda1e8
rpl-ext-header: Use 8-octet unit for HBHO length
According to RFC 2460 the length field of the Hop-by-Hop options header
should use a 8-octet unit (multiple of 8 byte).

In a normal configuration the RPL_HOP_BY_HOP_LEN define is 8, so the
current implementation works, but if RPL_HOP_BY_HOP_LEN is a multiple
of 8 the length is not calculated correctly.
2016-06-08 17:37:59 +02:00
Nicolas Tsiftes
10cd17b626 Merge pull request #1508 from simonduq/pr/rpl-non-storing
RPL non storing mode
2016-06-08 16:26:05 +02:00
Simon Duquennoy
535ff25da2 RPL non-storing defensive link update: make sure the topology is loop-free at all times 2016-06-08 14:14:03 +02:00
Simon Duquennoy
819916668e Incorporate latest changes on rpl tests to 23-rpl-non-storing 2016-06-08 14:09:43 +02:00
Simon Duquennoy
d5e74b9579 Code style 2016-06-08 14:05:37 +02:00
Simon Duquennoy
0f5e3413fa Simplify dao_input 2016-06-08 14:04:47 +02:00
Simon Duquennoy
6c4d5312ae uip-icmp6.c: call rpl_insert_header only when UIP_CONF_IPV6_RPL is set 2016-06-08 14:03:28 +02:00
Simon Duquennoy
4208973017 Fix DAO-ACK support for non-storing 2016-06-08 14:03:27 +02:00
Simon Duquennoy
6cdec70798 rpl_verify_header: do not select DAG in storing mode after updating neighbor rank, as this may result in a No-Path DAO being sent, which will drop the current packet. 2016-06-08 14:03:26 +02:00
Simon Duquennoy
343c274359 RPL: re-enable RPL_DIO_REFRESH_DAO_ROUTES by default as it is needed with DAO-ACK disabled. Now increments the DTSN only at the root 2016-06-08 14:03:25 +02:00
Simon Duquennoy
c3ea1f9fc6 Orchestra: added support for RPL non-storing mode 2016-06-08 14:03:24 +02:00
Simon Duquennoy
ded71a7400 RPL: add neighbor to cache on incoming DIO also at the root 2016-06-08 14:03:23 +02:00
Simon Duquennoy
b32b3f6666 RPL non-storing: add compile-test to also check for warnings 2016-06-08 14:03:22 +02:00
Simon Duquennoy
1a7133bbf2 Simplified configuration of RPL non-storing mode 2016-06-08 14:03:21 +02:00
Simon Duquennoy
f26ea34c61 Run RPL regression tests in non-storing mode 2016-06-08 14:03:19 +02:00
Simon Duquennoy
2fe2a28439 Make some of the rpl examples configurable in non-storing mode 2016-06-08 14:03:10 +02:00
Yasuyuki Tanaka
eef233ceab Clear the uIP buffer before calling dao_ack_output() 2016-06-08 14:02:52 +02:00