fros4943
faec70dee0
test app update: print sensor type
2009-05-19 17:54:08 +00:00
fros4943
d54176205c
decreased default elfloader memory usage for sky platform
2009-05-18 10:32:56 +00:00
nvt-se
bcc5084564
removed delay because while loop waits until completion anyway.
2009-05-15 13:54:08 +00:00
nvt-se
f9b35795c7
minor refactoring.
2009-05-14 12:18:49 +00:00
adamdunkels
bc6c9410cc
Print out the gateway's IP address more prominently
2009-05-12 17:32:49 +00:00
adamdunkels
00890caca8
Make sure that symbols.c is included in every native cpu build, not just the native target
2009-05-12 17:23:23 +00:00
nvt-se
74e9bc8789
Added flash reads and writes to energest.
2009-05-11 15:26:24 +00:00
adamdunkels
900480959b
Increased the default number of queue buffers: there usually is plenty of RAM left, so we should be able to afford it
2009-05-10 21:15:16 +00:00
joxe
6a7bc4c3a5
added mcu-chip temperature to accelerometer sensor - value 3
2009-05-08 16:03:50 +00:00
adamdunkels
6fcca2d545
Initialize ctimer, add IPv6 address configuration for the aaaa prefix
2009-04-29 11:49:27 +00:00
adamdunkels
e6215712ca
When a node is configured as an IP gateway, we switch off the power-saving MAC protocolto improve performance and to avoid problems with the serial communication that X-MACs use of rtimers can cause
2009-04-29 11:46:20 +00:00
adamdunkels
064f4488d4
Increase default CPU speed from 2.4576 MHz to 3.9 MHz. Communication works better, at a low power cost
2009-04-29 11:43:48 +00:00
adamdunkels
bbab7ba55c
When the tmote-bsl binary is found, program only one mote at once (parallel programming with tmote-bsl doesn't seem to work)
2009-04-29 11:42:56 +00:00
fros4943
9f299c277e
added experimental slip support for contiki motes
2009-04-23 09:15:51 +00:00
fros4943
9bd3d07510
implemented slip_arch_writeb() function
2009-04-23 09:02:06 +00:00
fros4943
b65014d1be
bugfix by Wolf-Bastian Pttner: check buffer size at incoming radio data
2009-04-16 14:38:41 +00:00
fros4943
bc6704079c
cc2420 checksums temporarily disabled, due to timing problems with the x-mac unicast optimization
2009-04-16 14:34:51 +00:00
adamdunkels
2e37fca49f
Check for tmote-bsl-linux binary under linux, and use it is available
2009-04-10 07:43:29 +00:00
adamdunkels
2545fd9069
Hack to make DS2411 ID useable as an Ethernet MAC address (remove multicast bit)
2009-04-10 00:40:08 +00:00
adamdunkels
3415ff26bd
Added CC2420 checksums to non-ipv6 packets. Set a conservative TCP MSS
2009-04-10 00:39:19 +00:00
nvt-se
172ffb74c7
fix compiler warnings. patch from Jesper Karlsson.
2009-04-08 14:56:00 +00:00
nifi
b41b79e3a9
Disable timestamp when using 802.15.4 frames (CC2420_CONF_TIMESTAMPS adds timestamp to radio packets).
2009-04-06 17:18:20 +00:00
nifi
900d8d8e17
changed to use HC01 compression for uip6
2009-04-06 16:01:11 +00:00
nifi
8b41f3a6a8
set rime addr size to 8 for uip6, restored clock resolution
2009-04-06 14:59:49 +00:00
nifi
76b7bf43d0
added setup for uip6 with 802.15.4 frames and routing using Rime
2009-04-06 14:12:58 +00:00
nifi
a36e529df1
added configuration for panid
2009-04-06 13:31:00 +00:00
nvt-se
f53560f6a5
enabled multihop routing, increased uip buffer size.
2009-04-06 13:23:14 +00:00
nifi
c1d490b6a7
added workaround for memcpy/memset bug in mspgcc
2009-04-06 13:07:37 +00:00
adamdunkels
58331e6802
Made tick resultion more fine-grained to support a shorter LPP listen time
2009-04-03 11:46:48 +00:00
fros4943
b730fb329d
changed upload rules due to problems on linux platforms
2009-04-02 11:15:30 +00:00
fros4943
3b3580e439
disabled writing IP addresses from inside COOJA, since the these should rather be determined by Contiki
2009-04-01 18:11:48 +00:00
fros4943
aa736322e1
removed unused uip/uaodv cooja comm stack. mesh-uip should be used instead
2009-04-01 17:17:55 +00:00
fros4943
3665422d8d
simplified cooja communication stacks initialization + added uipv6 stack
2009-04-01 13:50:12 +00:00
fros4943
6a99a82516
copied uipv6 configuration from native platform
2009-04-01 13:46:56 +00:00
fros4943
1c031504e5
no need to initialize serial line
2009-04-01 13:46:16 +00:00
fros4943
892bfb5678
moved radio-uip link functionality directly to comm stack sources
2009-04-01 13:45:41 +00:00
fros4943
eddd8350c5
renamed radio driver
2009-04-01 13:44:34 +00:00
fros4943
afed9bb2d0
icnlude packet radio by default
2009-04-01 13:39:54 +00:00
nifi
c6b15c289e
* show radio channel at startup
...
* only initialize timesynch when timesynch is enabled
2009-03-31 13:25:50 +00:00
nvt-se
e90149b7b4
avoid switching mode when tx or rx is active.
...
based on suggestions from Frederik Hermans and some code from Jesper Karlsson.
2009-03-30 14:07:34 +00:00
fros4943
5f1fda0406
removed unused variables + writing serial data in timeevent
2009-03-26 16:23:47 +00:00
fros4943
dda6de8438
+ clock stub functions
2009-03-26 16:22:36 +00:00
fros4943
ac22ad5081
changed the Makefile rules for uploading to sky-nodes.
...
the earlier approach caused problems sometimes, resulting in command succeeding without all nodes being reprogrammed
2009-03-26 13:29:44 +00:00
nvt-se
04bd414e1c
enabled LPP by default.
2009-03-26 12:51:55 +00:00
nvt-se
90b9b9bae3
configure LPP parameters with slightly longer listen time since the CC1020
...
driver switches from TX mode to RX mode rather slowly.
decreased CCA check timeout.
2009-03-26 12:47:12 +00:00
nvt-se
25cc327acc
avoid hanging in TX mode after CCA check failed.
...
minor memory savings.
2009-03-25 15:25:05 +00:00
nvt-se
96fbf3b853
use old style C comments.
...
convert printf to PRINTF.
remove unnecessary MS_DELAY calls from setupTX and setupRX.
2009-03-24 15:32:26 +00:00
nvt-se
15c447e57e
remove some unnecessary instructions and function calls. patch from Jesper Karlsson.
2009-03-24 15:13:11 +00:00
nvt-se
143c7f9cea
switched from serial to serial_line. patch from Jesper Karlsson.
2009-03-24 15:02:03 +00:00
fros4943
c76f34ff98
minor serial test application update
2009-03-21 15:47:40 +00:00
fros4943
9c9165dc90
start cooja with more memory to avoid outofmemory problems when running mspsim-based simulations
2009-03-20 13:23:44 +00:00
nvt-se
6b22fa60e8
- avoid costly rx state initialization if the radio is already on.
...
- code formatting.
2009-03-19 14:43:31 +00:00
nvt-se
8f85355f02
print the MAC protocol name when starting the node
2009-03-19 14:14:06 +00:00
nvt-se
b9ef907690
enable serial line tools using the same commands as the sky platform's Makefile
2009-03-17 22:27:14 +00:00
nvt-se
7e329ab467
removed obsolete file.
2009-03-17 22:20:04 +00:00
adamdunkels
b1cd9c207a
Removed serial.c, which is obsoleted by serial-line.c, which in turn now resides in Makefile.include
2009-03-17 21:51:13 +00:00
adamdunkels
727c5a2dbe
Renamed serial module to serial-line
2009-03-17 20:32:22 +00:00
adamdunkels
b20f0884ed
Renamed serial module to serial-line
2009-03-17 20:19:11 +00:00
adamdunkels
0076bfe8a5
Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy
2009-03-17 15:56:32 +00:00
nvt-se
7f3def31b7
removed duplicate inclusion of header, and sorted the entries.
2009-03-17 15:02:19 +00:00
nvt-se
6d0fc26ec1
disabled unstable SD driver.
2009-03-17 15:01:40 +00:00
fros4943
d6ebba536c
minor 64 bit fix: divide by sizeof(unsigned long) instead of constant 4
2009-03-13 14:40:07 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
dak664
932fc9f748
Remove tab that was preventing cgi invokation
2009-03-12 21:37:22 +00:00
adamdunkels
5920a86312
Moved the Raven-specific applications from the generic apps/ directory to the platform-specific platform/avr-raven/apps
2009-03-12 19:15:23 +00:00
fros4943
99b9e80de9
make all quickstart target phony
2009-03-12 17:48:23 +00:00
fros4943
72fdf5b379
make quickstart goal precious
2009-03-12 15:12:50 +00:00
fros4943
063bf88f90
cooja quickstart should be started from normal cooja working directory, otherwise config relative paths won't work
...
+
cygwin path fix for quickstart
2009-03-12 13:04:10 +00:00
nvt-se
80bbc92ffe
patch from Jesperk Karlsson. ensures that the fp_uart_handler type is known
...
in the header.
2009-03-12 12:23:22 +00:00
fros4943
5d27841807
+ contiki app object
2009-03-11 08:40:37 +00:00
fros4943
bcb34297df
reimplemented quickstart functionality
2009-03-11 07:45:54 +00:00
fros4943
0bc10750bc
added rule for .cooja target.
...
compiling for cooja is now similar to other platforms, for example:
make hello-world.cooja TARGET=cooja
2009-03-10 21:23:38 +00:00
julienabeille
0395ff5f39
sicslowpan Typo
2009-03-09 08:19:07 +00:00
c_oflynn
41c19115d2
fix compiling ravenusb platform
2009-03-06 15:21:45 +00:00
adamdunkels
3848bba210
Added support for serial data input
2009-03-06 00:13:56 +00:00
adamdunkels
8afff893f1
Removed old \mainpage documentation to avoid confusion with the main \mainpage
2009-03-02 22:04:14 +00:00
fros4943
3774395c82
cfs example updated
2009-03-02 09:44:07 +00:00
fros4943
286065b584
cfs updated
2009-03-02 09:34:47 +00:00
adamdunkels
e3043b1be2
Enable communication power accounting for xmac by default
2009-03-01 20:43:37 +00:00
adamdunkels
ac9ab9c582
#include lib/random.h
2009-03-01 20:42:10 +00:00
nvt-se
47d70f2ae3
Switched name to CFS_CONF_OFFSET_TYPE to emphasize that it is a configurable option.
2009-03-01 12:00:00 +00:00
nvt-se
b47221672a
switched cfs offset type to signed long to allow backward movements with cfs_seek.
2009-02-28 13:41:16 +00:00
fros4943
9c8c4898f7
updating cooja cfs stubs according to recent commits
2009-02-27 16:06:25 +00:00
nvt-se
9f8f773b43
use unsigned long as cfs offset type.
2009-02-27 14:53:15 +00:00
oliverschmidt
03e7eb2535
Fixed comment (just to make sure that committing still works after all these months).
2009-02-27 07:57:13 +00:00
nvt-se
9b548619ed
removed redundant definitions.
2009-02-25 23:57:13 +00:00
adamdunkels
d761dfebd1
Bugfix: reduced the size of the uIP buffer to account for MAC header space
2009-02-25 10:23:03 +00:00
nvt-se
c148e2e7ea
Do not include codeprop.h by default.
2009-02-23 14:44:26 +00:00
nifi
0db6403c5d
removed unnecessary reference to codeprop.h
2009-02-21 11:23:54 +00:00
adamdunkels
7781bbea58
Enabled X-MAC announcements by default, disabled polite broadcast announcements by default
2009-02-14 22:52:24 +00:00
adamdunkels
585620c102
Reverted the recent change from random_rand() to rand(). It turned out that
...
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
fros4943
f1fc4c879f
cfs_coffee_get_fd_set() was renamed
2009-02-09 10:09:13 +00:00
nvt-se
d0a546b049
A long refactoring session yielded the following.
...
Technical changes:
* Factored out file specific information from the file descriptor
structure into a new file structure.
- Useful file metadata can be stored after the file is closed.
- File descriptors become much smaller.
- Significantly reduces the need to scan for the file end.
* Use correct types in all function signatures.
* Removed the directory cache.
Results:
* Enormous speed increase when opening cached files (10x-20x.)
* Multiple fd:s pointing to the same file have the correct semantics.
* About 100 bytes smaller ROM size.
* Slightly smaller static RAM size.
2009-02-08 17:08:13 +00:00
adamdunkels
440899e4cb
Seed rand() with the node ID + MAC address
2009-02-07 16:49:36 +00:00
adamdunkels
5cf0c25ca6
A few more minor fixes
2009-02-04 20:58:05 +00:00
adamdunkels
96882c402a
Fixed conformance to Contiki code style :)
2009-02-04 20:55:41 +00:00
joxe
9689a579be
added DCO/CPU speed re-synch each 30 seconds
2009-02-04 19:32:20 +00:00
fros4943
c16921f108
checkpointing library implemented for the sky platform (cfs interface is currently not optimized)
2009-02-04 17:51:49 +00:00
zhitao
5789bf5596
Modified comments for receiver filter bandwidth settings
2009-02-02 08:52:49 +00:00
joxe
e5f0d786a8
fixed sky platform to use the new uart1_active api to avoid messing up last chars transmitted
2009-01-31 12:45:03 +00:00
fros4943
603740b13b
removed compiler warning by returning 0 at undefined value
2009-01-23 17:08:17 +00:00
fros4943
ebcaf8eec8
removed compilation warning due to unused is_gateway variable (outside uIP mode)
2009-01-19 13:44:04 +00:00
adamdunkels
e70b45c102
Updated to make use of the tmote-bsl instead of msp430-bsl (needed for the Sentilla JCreate) if it exists
2009-01-15 22:12:46 +00:00
adamdunkels
29fe3d8741
Added acc-sensor.c, dDriver for the acceleromenter sensors on the Sentilla JCreate board
2009-01-15 21:07:03 +00:00
adamdunkels
9f0006fde0
Driver for the acceleromenter sensors on the JCreate board
2009-01-15 21:06:02 +00:00
fros4943
5f3c1a0e12
elfloader executing loaded programs from ram (not rom) by default on msp430 platforms.
2009-01-15 09:04:04 +00:00
joxe
d2dc732435
changed list_pop to return removed element
2008-12-16 09:59:42 +00:00
c_oflynn
5ec6412fbc
*Support for Atmel 'Router Under Mac' (RUM) in Jackdaw
2008-12-10 21:26:05 +00:00
zhitao
a50d5b701e
direct the UART input stream to the default Contiki serial process
2008-12-09 15:56:39 +00:00
nvt-se
79d4d22ee7
replaced usage of 16-bit rimeaddr field.
2008-12-02 16:00:15 +00:00
fros4943
0ab57730f8
removed reference to the removed u16 rime address field
2008-12-01 13:20:51 +00:00
c_oflynn
9fb2c9d836
* Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com>
...
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
2008-11-29 15:55:02 +00:00
fros4943
6150d13254
support for contiki-node simulation on 64-bit architectures (contributed by Jesper Karlsson and David Gustafsson)
2008-11-28 16:41:26 +00:00
zhitao
6b33cf434f
bug fix: using memcpy() to append CRC checksum to odd-size payload caused memory corruption, use individual byte assignments instead
2008-11-25 16:05:22 +00:00
joxe
55280131fc
added printout of MAC protocol name
2008-11-24 14:31:08 +00:00
fros4943
720357bc60
added log_message() implementation
2008-11-21 10:35:46 +00:00
c_oflynn
8bae6890a8
Changes by "David Kopf" <dak664@embarqmail.com> to:
...
-Add hit counter to index.html
-Adding link to favicon.png
-Fix serving of binary (image) files in avr-makefsdata file
Changes by Colin O'Flynn:
-Removed extra linebreak in tutorial-raven.txt
-Fix to contiki-conf.h in avr-rcb platform
2008-11-18 22:03:12 +00:00
oliverschmidt
7cf3165155
Replaced NETSIM macro with general (and now actually working) solution in Makefile.include.
2008-11-17 22:52:10 +00:00
oliverschmidt
7ac49a573b
Reverted recent change as there's now a general (and actually working) solution in Makefile.include.
2008-11-17 22:40:10 +00:00
nvt-se
98a42524d3
minor formatting changes
2008-11-17 16:18:52 +00:00
zhitao
0be308b7ce
changed RSSI samples count to maximum (=16)
2008-11-17 16:14:09 +00:00
c_oflynn
42dd7c37fc
Changed timeout to 1 second on fragmentation
2008-11-16 16:07:13 +00:00
oliverschmidt
a844636218
Minor docu update.
2008-11-13 20:26:27 +00:00
c_oflynn
699c493866
forgot these files for RCB...
2008-11-13 15:07:52 +00:00
zhitao
29b0d010d5
added #define for platform check
2008-11-13 14:25:47 +00:00
nvt-se
90691eb6a2
crc calculation contributed by Carlo Alberto Buano + some refactoring.
2008-11-11 12:24:43 +00:00
oliverschmidt
d08a218a7a
Minor formatting change.
2008-11-10 22:52:43 +00:00
oliverschmidt
24f04a57b2
Include wget shell command in "standard" shell environments.
2008-11-10 22:23:50 +00:00
oliverschmidt
c109e102c4
Include wget shell command in "standard" shell environments.
2008-11-10 22:10:32 +00:00
nvt-se
1a6c909736
added sd_write declaration.
2008-11-10 14:32:49 +00:00
adamdunkels
34e2734cd9
Use the uip-over-mesh network gateway functionality
2008-11-09 12:30:32 +00:00
adamdunkels
83155d48f9
Moved the network gateway logic to the uip-over-mesh module.
2008-11-09 12:22:04 +00:00
c_oflynn
b6e76a4947
Fixed serious bug which causes RNDIS task to end when non-data message are sent via RNDIS interface
2008-11-08 17:11:18 +00:00
c_oflynn
f13ec95efa
*** empty log message ***
2008-11-08 03:29:15 +00:00
nvt-se
0c4f7bed8f
temporary fix to get sicslowpan.c working on the Sky platform:
...
conventional MAC implementations require a call to the MAC driver's
read function.
2008-11-06 20:45:06 +00:00
nvt-se
21e4b4be80
map rime address to mac address for ipv6
2008-11-06 15:14:24 +00:00
nvt-se
c5d9795f92
added initialization for uip6
2008-11-05 15:34:04 +00:00
nvt-se
d1d09ea1fd
added IPV6 configuration.
2008-11-05 14:31:06 +00:00
nvt-se
7ac98ee257
added missing watchdog_periodic
2008-11-04 15:46:59 +00:00
adamdunkels
1d56451d11
Changed the default IP address to match the default setting in tapdev
2008-10-31 18:11:44 +00:00
oliverschmidt
072830d4f2
Migrated project files from VC++ 2005 (Express Edition) to VC++ 2008 (Express Edition). Almost all changes were required because VC++ 2008 does a parallel build. Therefore all intermediate files need to have unique names. This wasn't the case by default because VC++ doesn't presume seperate projects to build into the same directory - as it is the case with all the *.prg and *.dsc files of Contiki.
2008-10-29 15:03:34 +00:00
oliverschmidt
ebcafc68c8
Migrated solution file from VC++ 2005 (Express Edition) to VC++ 2008 (Express Edition).
2008-10-29 14:59:35 +00:00
joxe
bc39f2a86c
added get_rssi_packet for getting RSSI from the last packet received
2008-10-29 09:22:39 +00:00
fros4943
641c48ee00
not limiting random seed to 99
2008-10-28 15:37:34 +00:00
nvt-se
4829ffea50
removed supererogatory file
2008-10-28 14:07:32 +00:00
nvt-se
59012007b9
added an SD example application
2008-10-28 12:56:57 +00:00
nvt-se
1fdb3c21f0
fixed problems with uart and sd cards.
2008-10-28 12:42:53 +00:00
c_oflynn
f301f9d118
Changed copyright.
2008-10-15 15:59:38 +00:00
mvidales
2e2eb8d387
changed stabs to dwarf-2 for debugging.
2008-10-15 15:42:18 +00:00
c_oflynn
1375511179
Fix to allow building without LCD interface
2008-10-15 14:38:20 +00:00
mdurvy
acfe78a51a
last version of the raven lcd user interface
2008-10-15 13:13:49 +00:00
adamdunkels
3428e17cea
Changed the \mainpage doxygen tag to avoid confusion with the main Contiki \mainpage
2008-10-15 12:37:59 +00:00
adamdunkels
ba43d94ef7
Define IPv6 options only if UIP_CONF_IPV6 is defined (which should be defined by the Makefile.include if IPv6 is enabled)
2008-10-15 09:14:25 +00:00
c_oflynn
1c5a27f693
Moved raven-lcd.h file
2008-10-14 22:05:09 +00:00
c_oflynn
6e42bd3496
example\webserver-ipv6-raven works!
2008-10-14 21:29:23 +00:00
c_oflynn
d5865cb2b6
-Change needed for ravenusb to build
...
-Reverts Makefile.include back to 1.57, then apply the needed change
2008-10-14 20:31:46 +00:00
c_oflynn
a520fe4646
Lots of changes / commits! This allows ravenusbstick example to build at least.
2008-10-14 19:06:51 +00:00
julienabeille
2238f2e7da
Debugged autoconf for ethernet
2008-10-14 16:50:11 +00:00
julienabeille
08465a6c19
new-ipv6 compiles on native cygwin
2008-10-14 14:00:58 +00:00
julienabeille
4f9bc05f90
ping-ipv6 example compiles on native cygwin
2008-10-14 13:39:12 +00:00
julienabeille
9b2961046a
Modifs to minimal-net for IPv6 support
2008-10-14 10:06:26 +00:00
adamdunkels
0a961b2ada
Contiki port for the Atmel AVR Raven board
2008-10-14 09:40:30 +00:00
nvt-se
aff141f56e
reduced default sizes
2008-10-09 14:56:53 +00:00
fros4943
115a2b0782
renaming printf/putchar/puts symbols to avoid jni library loading overriding our custom implementations
...
experimental: directly references objcopy (tested on win32+linux)
2008-10-05 15:43:09 +00:00
fros4943
d79b1d55f7
not implementing putc(..FILE*) function, only stdout
2008-10-05 15:40:27 +00:00
nvt-se
10639bc982
use abstract types for offsets and pages so that we can easily port it to
...
very large or small memories.
2008-10-03 19:27:28 +00:00
fros4943
4cc56a741d
printf implementation towards cooja
2008-10-03 09:41:16 +00:00
fros4943
08502eb344
removed refences to printf2log.h
2008-10-03 09:39:38 +00:00
fros4943
2fb6410e4d
removed old printf output conversion method, instead implementing putchar() and printf()
2008-10-03 09:37:32 +00:00
joxe
1a1ddd0bd5
removed energest-arch from sky and esb platforms
2008-09-29 12:38:18 +00:00
nvt-se
9c3f5beec7
added a small guide.
2008-09-26 18:14:12 +00:00
nvt-se
37fa4da899
support 9600 baud
2008-09-19 12:18:04 +00:00
joxe
5b1c229754
fixed battery sensor for sky platform
2008-09-18 21:29:06 +00:00
joxe
5d860b1df2
changed sleep to go into LPM3
2008-09-18 17:58:21 +00:00
joxe
8aa8e26c54
removed redundant sensor initialization, added comment
2008-09-14 20:47:30 +00:00
adamdunkels
0f82635dc9
Bugfix: avoid overflowing the event queue
2008-08-15 19:54:58 +00:00
adamdunkels
35d85897b9
Minor bugfix: the printf() must include the n
2008-08-15 19:34:07 +00:00
nvt-se
deefb97c16
Changed clock value so it is a power of two.
2008-08-14 11:11:34 +00:00
matsutsuka
6c9291f38b
Removed dependency of Cygwin from hexameter.
2008-07-20 07:44:39 +00:00
oliverschmidt
f822ac9797
Added clock_seconds() implementation.
2008-07-12 14:44:37 +00:00
nvt-se
2b68f88e77
moved platform independent definitions
2008-07-11 21:39:26 +00:00
nvt-se
e757cae8ea
removed obsolete definition
2008-07-11 21:36:45 +00:00
nvt-se
e8a85b3726
moved platform independent code to the right place
2008-07-11 21:35:10 +00:00
nifi
9952ee8f26
Ported Coffee to the ESB platform
2008-07-11 15:27:57 +00:00
adamdunkels
b18b84bb0e
Added clock_seconds implementation to minimal-net port
2008-07-10 17:10:39 +00:00
adamdunkels
a8f2e8ca48
Added clock_seconds implementation to win32 port
2008-07-10 17:08:54 +00:00
adamdunkels
6bfe18bce1
Changed startup message
2008-07-09 20:58:25 +00:00
nifi
0d87322a18
minor documentation update and removed unused function prototypes
2008-07-09 20:45:06 +00:00
adamdunkels
710f9cf54b
Removed debug printout
2008-07-09 09:37:50 +00:00
adamdunkels
2023a692d4
Added clock_second() implementation to make th shell work
2008-07-09 09:34:29 +00:00
nifi
f93f501a4d
updated tr1001_send and tr1001_read to match radio driver api
2008-07-08 13:22:31 +00:00
nifi
8718c41945
Fixed compiler warning.
2008-07-08 12:35:05 +00:00
nifi
8db3671d65
- Replaced TR1001 statistics with rimestats
...
- Fixed typo in constant name
- Changed all occurences of u8_t and u16_t to uint8_t and uint16_t
2008-07-08 12:27:22 +00:00
nifi
6e657ad3d8
Moved old Makefile from platform/esb to backyard/platform/esb
2008-07-08 11:21:51 +00:00
nifi
16f7888b52
changed clock resolution to 64 (needs to be a power of 2) and updated uIP settings
2008-07-08 09:36:48 +00:00
adamdunkels
8e5d255b5b
Moved initialization of the SHT11 until after other initialization: this seems to fix a bug where the SHT11 temperature and humidity values started varying wildly.
2008-07-08 08:23:24 +00:00
adamdunkels
84e4bf7a15
Changed order of initialization to make light sensors work again: a previous change to irq.c seems to have conflicted with light sensor initialization
2008-07-07 23:44:58 +00:00
oliverschmidt
9ac4123f00
Adjusted VC++ project file to recent change regarding cfs implementation (and added preprocessor define _CRT_NONSTDC_NO_DEPRECATE).
2008-07-06 11:06:14 +00:00
oliverschmidt
9d5ae4864e
Added preprocessor define _CRT_NONSTDC_NO_DEPRECATE to allow usage of open(), close(), read(), write() and lseek().
2008-07-06 11:04:33 +00:00
oliverschmidt
c60e91bf59
Moved Win32 cfs directory functions from cfs-win32.c to cfs-win32-dir.c.
2008-07-06 10:24:38 +00:00
oliverschmidt
bf3c92e98c
Leverage split of cfs-posix and cfs-posix-dir by reusing cfs-posix for win32 and replacing only cfs-posix-dir with cfs-win32-dir.
2008-07-06 08:29:37 +00:00
oliverschmidt
86bd7e9829
Added lseek dummy.
2008-07-06 07:34:34 +00:00
oliverschmidt
fa956117f7
Dummies should rather return errors.
2008-07-06 07:32:20 +00:00
oliverschmidt
c00de08dec
Added lseek dummy.
2008-07-06 07:28:42 +00:00
nvt-se
133a314b1c
energest.h moved to sys/
2008-07-04 02:58:58 +00:00
adamdunkels
64b6663b11
moved energest from lib/ to sys/
2008-07-03 23:59:20 +00:00
adamdunkels
c6579d4f08
CFS Coffee arch file for the native platform
2008-07-03 23:13:55 +00:00
adamdunkels
51f4ab8b2c
Changed type from off_t (that potentially conflicts with existing types.h typedefs) to unsigned long
2008-07-03 23:12:10 +00:00
adamdunkels
84a42a0bb3
xmem implementation for the native platform
2008-07-03 23:11:27 +00:00
matsutsuka
28bcff539f
path misconfiguration has been fixed
2008-07-02 15:04:07 +00:00
matsutsuka
4cf1687845
shell is removed temporarily since it doesn't work in the current version.
2008-07-02 15:03:44 +00:00
adamdunkels
28331191b3
Changed name of simple-cc2420 to cc2420
2008-07-02 09:38:06 +00:00
adamdunkels
66876625d4
Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.
2008-07-02 09:05:40 +00:00
adamdunkels
dafa1d89a2
Added cc2420-aes.c (functions for interfacing the build-in AES support of the CC2420)
2008-07-02 08:47:05 +00:00
matsutsuka
4ecebdd842
A binary conversion tool has been modified to support variations.
2008-07-02 07:17:14 +00:00
adamdunkels
1586d8f36f
Changed filename of the CC2420 driver from simple-cc2420 to cc2420.
2008-07-01 21:02:51 +00:00
oliverschmidt
c2bec97eef
Added some info on the Apple2 PFS (and AppleCommander).
2008-06-12 22:45:17 +00:00
oliverschmidt
433518c3cb
Just some minor reformatting.
2008-06-12 22:16:50 +00:00
nvt-se
f83000af8a
clear bit when uart edge is set.
2008-05-29 22:06:18 +00:00
nvt-se
36fec8dd01
moved sdspi.c to the sd file list.
2008-05-29 22:04:30 +00:00
adamdunkels
d134a1fcb1
Moved sky-specific make targets from the tools/sky/Makefile to the more natural platform/sky/Makefile.sky. Added a number of convenient targets for accessing the serial port.
2008-05-29 20:15:49 +00:00
nvt-se
44c93fcd93
cleared lock semantics
2008-05-28 13:17:08 +00:00
adamdunkels
7ca33e2285
Reverted inadvertedly committed change to lpp instead of nullmac
2008-05-27 19:07:20 +00:00
nvt-se
fed62e1642
added timeout
2008-05-27 14:22:55 +00:00
nvt-se
07f8875963
added missing header
2008-05-27 14:05:09 +00:00
nvt-se
f2c6f77f7d
removed debug print
2008-05-27 14:04:15 +00:00
adamdunkels
1263eb8455
Moved old unused files to backyard
2008-05-27 13:16:34 +00:00
nvt-se
ce84dce702
reset locks on forced mode switch
2008-05-27 13:05:52 +00:00
nvt-se
9c9c2573c3
lock UART for RS232 in putchar
2008-05-27 13:03:19 +00:00
nvt-se
bff587e32c
lock SPI bus when erasing
2008-05-27 13:01:27 +00:00
nvt-se
a26bcf30f7
added SPI parameters.
2008-05-27 12:25:48 +00:00
oliverschmidt
2ede893aa6
The feature set of gnumake is really frightening: This time I discovered 'target-specific variable values'...
2008-05-26 11:26:57 +00:00
oliverschmidt
f74503c23c
Replace non-fully-functional hack with the new gnumake variable CONTIKI_PROJECT.
2008-05-26 10:13:32 +00:00
oliverschmidt
356f5cfa04
The recent optimizations (usage of language card bank2 through new C-library, logging through ROM routine, removal of unused IP forwarding code) allowed to increase the number of concurrent HTTP conntections from 3 to 7 :-)
2008-05-23 23:13:41 +00:00
oliverschmidt
a78a7dedbc
Added make target 'disk' for creating a .dsk disk image using AppleCommander.
2008-05-22 22:21:43 +00:00
oliverschmidt
7120cf4404
Added make target 'disk' for creating a .d71 disk image using c1541.
2008-05-22 22:19:30 +00:00
oliverschmidt
dc63b33956
Added make target 'disk' for creating a .d64 disk image using c1541.
2008-05-22 22:18:25 +00:00
oliverschmidt
cd1608aa08
Activate uIP forwarding support.
2008-05-22 19:49:48 +00:00
oliverschmidt
e914302e94
Removed check already done in Makefile.include.
2008-05-22 19:45:47 +00:00
oliverschmidt
b750e8cc42
Moved platform/c64/contiki.cfg to tools/c64/sample.cfg
2008-05-21 08:13:04 +00:00
oliverschmidt
5dba39fab1
Moved platform/c128/contiki.cfg to tools/c128/sample.cfg
2008-05-21 08:09:46 +00:00
oliverschmidt
a341f981aa
Moved platform/apple2enh/contiki.cfg to tools/apple2enh/sample.cfg
2008-05-21 07:59:43 +00:00
adamdunkels
8b4179cf45
Moved ctimer_init() so that MAC protocols can use ctimers in their initialization code
2008-05-19 12:07:49 +00:00
adamdunkels
7aa8508e0b
Added display of radio status: a green ring appears around nodes with their radio turned on. Added a command that prints out a .fig file that shows the current network setup (press the 'd' key).
2008-05-14 19:22:57 +00:00
adamdunkels
31ea41d8db
Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level
2008-05-14 19:19:28 +00:00
nvt-se
776f377a69
Configuration for the Sky platform.
2008-04-28 10:34:33 +00:00
joxe
7be3aeeeb5
added sampling mode in sound sensor
2008-04-25 15:55:37 +00:00
fros4943
c4df31376e
cooja hello world (+ include printf2log.h)
2008-04-22 13:07:49 +00:00
nvt-se
73978e3133
only include sdspi.h if WITH_SDC is on.
2008-03-31 14:33:23 +00:00
nvt-se
acf01a0c58
fixed compilation error.
2008-03-31 14:32:00 +00:00