Michael Richardson
f1433f7d5f
tunslip6: option to turn off processing of IPA= address allocation
2015-05-24 18:55:07 -04:00
Michael Richardson
6608b62b01
tunslip6: make printing of sensible strings from mote more reliable
2015-05-24 18:55:02 -04:00
Michael Richardson
6b473301c5
tunslip6: removed commented out line printing IP address
2015-05-24 18:54:55 -04:00
Michael Richardson
ab2c110c70
tunslip6: show progres with -P argument
2015-05-24 18:54:49 -04:00
Michael Richardson
6232cc488c
tunslip6: remove trailing whitespace
2015-05-24 18:54:38 -04:00
Fredrik Österlind
d1f976886f
Merge pull request #1040 from atiselsts/cooja_multichannel
...
Improve multichannel support in Cooja
2015-05-19 08:59:06 +02:00
Moritz 'Morty' Strübe
c4f8f0acfb
Add regression-test for tools
2015-05-17 12:26:08 +02:00
Simon Duquennoy
f45c6ad1b0
Merge pull request #1048 from cmorty/pull/serialdump
...
Fix and clean up serialdump.c
2015-05-15 20:12:58 +02:00
Fredrik Österlind
9261ff5d13
Merge pull request #979 from TheGeorge/drifting-motes
...
Time Drifting Motes
2015-05-13 11:21:34 +02:00
Moritz 'Morty' Strübe
23d6250584
Turn on optimization
2015-05-11 10:43:05 +02:00
Moritz 'Morty' Strübe
16f7c2448c
Improve error message
2015-05-11 10:43:05 +02:00
Moritz 'Morty' Strübe
1e359d2324
Improve O_SYNC logic
2015-05-11 10:43:04 +02:00
Moritz 'Morty' Strübe
425c58e79d
Set default speed to 115200
2015-05-11 10:43:04 +02:00
Moritz 'Morty' Strübe
d26afef966
Fix serialdump.c
...
_GNU_SOURCE is needed for O_DIRECT
time.h is needed for strftime
2015-05-11 10:43:04 +02:00
Moritz 'Morty' Strübe
016bcdb8a8
Fix indentation
2015-05-11 10:42:54 +02:00
Adam Dunkels
fb64e64ae2
Java code to let Cooja connect to a serial port
2015-05-10 10:51:12 +02:00
Andreas Löscher
abe8e024ce
fixed a bug where the scheduled time is not the executed one
2015-05-07 13:24:30 +02:00
Andreas Löscher
44c317ce1c
Fix: the last execution time must be carried over when skipping
2015-05-07 13:24:30 +02:00
Andreas Löscher
2bd50bcbdc
better implementation of the drifting
2015-05-07 13:24:30 +02:00
Andreas Löscher
21a22caf33
Added GUI and config file handling for Clock
2015-05-07 13:24:30 +02:00
Andreas Löscher
cb6759c0a9
Time deviation support for Mica Motes
2015-05-07 13:24:30 +02:00
Andreas Löscher
efbd170733
standart deviation is 1.0
2015-05-07 13:24:30 +02:00
Andreas Löscher
97da226255
time deviation for MSP based nodes
2015-05-07 13:24:30 +02:00
Andreas Löscher
1c4a6f701e
No deviation support for Contiki motes
2015-05-07 13:24:30 +02:00
Andreas Löscher
d2ddafb1d2
typos
2015-05-07 13:24:30 +02:00
Andreas Löscher
ff4aee68bd
Support in the mote clock interface for time deviation
2015-05-07 13:24:30 +02:00
Atis Elsts
67427b9b86
Improve multichannel support for Cooja.
...
* Fix CCA detection in Cooja in the case when the receiver swicthes on the right channel during an ongoing transmission. Always add a connection on transmission, even when the channel is not correct. Initially the connection is in a dormant state; this mimics what Cooja is doing when the receiver radio is turned off;
when the receiver is turned on and switched to the right channel, `updateSignalStrengths()` is called, and the connection starts to recieve PHY-level traffic.
* Add "channel" property for DGRM edges.
* Avoid cross-channel interference on DGRM and MRM radio mediums
2015-04-28 18:43:55 +02:00
Oliver Schmidt
a824722862
Merge remote-tracking branch 'upstream/master'
2015-04-26 14:35:40 +02:00
Oliver Schmidt
da536cb07c
Removed superfluous AppleCommander parameters.
2015-02-21 17:16:08 +01:00
Andreas Löscher
a4206273a5
Fixed HC analyser for SAC and DAC fields
2015-02-16 13:58:36 +01:00
Jelmer Tiete
44d1a376ec
Updated cc2538-bsl submodule to version 1.1 (d6711e2). Most important changes include support for Python3, fixed a bug that would make synch fail on first try, added support for DTR and RTS pins driving Bootloader_enable and Reset pins, versioning system, setting of secondary IEEE address, general clean-up.
2015-02-12 20:13:40 +01:00
Simon Duquennoy
a9cc909794
Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_*
2014-12-01 21:02:57 +01:00
Simon Duquennoy
722b3258d1
Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack.
2014-12-01 20:13:09 +01:00
kkrentz
fb00a217f5
packetbuf: Use packetbuf_holds_broadcast() all-over
2014-11-13 09:58:08 -08:00
Moritz 'Morty' Strübe
1692169138
Output sha1sums of files used for simulation on fail
...
This helps reproducing results from the CI
2014-11-13 09:10:53 +01:00
Fredrik Österlind
16141845cf
Merge pull request #850 from TheGeorge/master
...
Pull request for issue #840
2014-11-10 15:36:57 +01:00
Andreas Löscher
6d61893e09
Fixed a bug with the ScriptRunner plugin
...
The ScriptRunner plugin started the simulation in GUI and NOGUI mode.
Now the simulation is only started in nogui mode
2014-11-07 13:53:16 +01:00
Andreas Löscher
f68bc3a40b
fixed a bug in executeJAR
2014-11-07 12:09:14 +01:00
Andreas Löscher
0e729592f3
Added the control plugin behaviour to executeJAR
2014-11-07 11:45:38 +01:00
Enrico Joerns
f49e1b8f5f
Button: Allow to press and release button by mouse and key
...
In the previous implementation a click event was triggered when the
button was pressed.
This implementation allows to set and release buttons independently both
by mouse clicking and by key typing.
2014-11-07 01:38:54 +01:00
Andreas Löscher
4dcc3ba7fa
Better error message when aborting simulation
2014-11-06 17:23:01 +01:00
Andreas Löscher
6cbe94b7e9
New PluginType SIM_CONTROL_PLUGIN for sim control
...
SIM_CONTROL_PLGUIN are handled like SIM_PLUGIN, with one exception.
If the simulation is started with -nogui=<simfile> than it is checked
if a controlling plugin is loaded. If not, the simulation terminates
with an error message.
2014-11-06 17:16:24 +01:00
Enrico Joerns
bc6b7535d0
Buttons: use non-deprecated MSPSim button api
2014-11-04 01:48:12 +01:00
Enrico Joerns
b5d119babd
Buttons: Some minor cleanups
...
Removed imports not required anymore and made some class members final
2014-11-04 01:48:12 +01:00
Enrico Joerns
b28c593776
Buttons: Added missing @Override annotations
2014-11-04 01:48:12 +01:00
Enrico Joerns
0a63922fa2
Buttons: Move implementation of button routines to Button class
...
The implementation of clickButton(), pressButton(), and releaseButton()
can be shared accross the several node-dependent implementations as
they use the node-dependent doPressButton() doReleaseButton() routines.
2014-11-04 01:48:12 +01:00
Enrico Joerns
be88a4fc52
Button: Add doPressButton() and doReleaseButton() to Button class
...
As every Button has a node-specific implementation part, this should be
the minimal interface to the backend node emulator for pressing and
releasing a button.
2014-11-04 01:48:11 +01:00
Enrico Joerns
378ca2629d
Button: None of the buttons will saves its state
...
Saving a buttons state in simulation file is not required as its state
is much too volatile.
2014-11-04 01:48:11 +01:00
Enrico Joerns
82d30ef2e3
SkyButton: Reduce dependency on SkyMote
...
Placed call to setButton() in implementation-specific functions
doPressButton() and doReleaseButton() as in ContikiButton.
2014-11-04 01:48:11 +01:00
Enrico Joerns
d99708ba08
Button: Move common interface visualization to Button class
...
The implementation of a simple JPanel with a JButton was only code
duplication accross the several button implementations.
2014-11-04 01:48:11 +01:00
