Commit Graph

1364 Commits

Author SHA1 Message Date
George Oikonomou
f401c7cc60 Save new TX power setting even if the RFC is powered off.
The current logic attempts to send `CMD_SET_TX_POWER` before saving the new power setting. If `CMD_SET_TX_POWER` fails the power setting will not get saved. As a result, when the RFC is powered off, all attempts to change TX power will fail.

This commit changes this logic to always save the new TX setting as requested by the user. If the RFC is powered up, we apply it immediately. If it is powered down, the new setting will automatically be applied next time we send `CMD_RADIO_SETUP`.

Fixes #1340
2015-11-01 20:56:52 +00:00
George Oikonomou
1ee40ef021 Fix the logic that detects whether a command is a Radio OP 2015-11-01 20:48:28 +00:00
George Oikonomou
946b72a58d Mask CMDSTA when waiting for a command to get accepted 2015-11-01 20:46:46 +00:00
Oliver Schmidt
692fbf5422 Merge pull request #1343 from oliverschmidt/master
Added 80 column IRC client / web browser for the C64.
2015-10-31 15:18:10 +01:00
Oliver Schmidt
fb5d0b7ef0 Made 80 column display a cc65 application attribute.
So far 80 column display was an attribute of a cc65 platform. Now each cc65 application can ask for 80 column display by defining WITH_80COL. Of course this is ignored by platforms incapable of 80 column display.

I see three types of application:

* Applications not benefitting from 80 column at all and in fact looking better with 40 column display. These are now using 40 column display. Examples: ethconfig, ipconfig

* Applications taking advantage of 80 column display if it is available without drawbacks. These stay as they were. Examples: Telnet server, web server, wget

* Applications needing 80 column display so urgently that it is likely desirable even if the display becomes harder to read. These come now in both flavors allowing the user to choose. Examples: IRC, web browser

Note: This change doesn't actually introduce any 80 column display with drawbacks. This if left to a subsequent change.
2015-10-30 12:42:58 +01:00
George Oikonomou
3e0f37090c Merge pull request #1324 from msloth/master
Remove LED fade in lpm.c
2015-10-29 11:36:39 +00:00
Marcus Linderoth
1906bff17c allow lpm_shutdown without a wake-up pin set 2015-10-28 11:06:26 +01:00
Marcus Linderoth
ea7a5d1c63 Remove fade away of LED when going into shutdown mode; it consumes power and is application-layer stuff. 2015-10-28 10:51:37 +01:00
Benoît Thébaudeau
bf41de1be5 Merge pull request #1078 from drandreas/cc2538-crypto
cc2538: Add PKA drivers, ECC algorithms and examples
2015-10-21 11:24:35 +02:00
Simon Duquennoy
2daa3d7377 Merge pull request #1269 from tadodotcom/tmp-uip-fallback-iface
More flexibility for the fallback interface
2015-10-20 11:33:14 +02:00
AntiCat
d631270af4 cc2538: Add PKA drivers, ECC algorithms and examples 2015-10-18 20:14:17 +02:00
Vladimir Pouzanov
2d75926989 Fixed linuxradio-drv guard macro name 2015-09-29 12:29:08 +01:00
Simon Duquennoy
6d4f50e53a Merge pull request #1282 from farcaller/nativenet
Basic NETSTACK_CONF_RADIO based on kernel 802.15.4
2015-09-28 19:30:38 +02:00
Mariano Alvira
ff7129dc53 Merge pull request #881 from drugo72/avr-fixes
Avr fixes
2015-09-28 09:41:21 -05:00
Vladimir Pouzanov
bd1b7d9814 Fixed linuxradio compilation issues with native and minimal-net 2015-09-28 12:48:01 +01:00
Vladimir Pouzanov
4c8618e6ba Extracted linuxradio device name to contiki-conf 2015-09-28 12:48:00 +01:00
Vladimir Pouzanov
52c90519d9 Fixed missing #includes and restricted linuxradiodrv compilation to linux 2015-09-28 12:48:00 +01:00
Vladimir Pouzanov
43a327df5a Cleaned up and re-formatted source of linuxradiodrv 2015-09-28 12:47:12 +01:00
Vladimir Pouzanov
113d9761f7 Better failure handling in linuxradiodrv 2015-09-28 12:47:12 +01:00
Vladimir Pouzanov
5fed4a3f1c Using MAX_PACKET_SIZE where appropriate in linuxradiodrv 2015-09-28 12:47:12 +01:00
Vladimir Pouzanov
beef4f5d5d Added better error handling to linuxradiodrv transmit() 2015-09-28 12:47:12 +01:00
Vladimir Pouzanov
8a068f8512 Cleaned up linuxradiodrv code 2015-09-28 12:47:12 +01:00
Vladimir Pouzanov
867368b929 Basic NETSTACK_CONF_RADIO based on kernel 802.15.4 2015-09-28 12:47:11 +01:00
Laurent Deru
a58fa16cc6 Merge pull request #1252 from tadodotcom/cpu-native-ldflags-fix
Don't override LDFLAGS on Linux for the native CPU
2015-09-23 09:44:22 +02:00
Cristiano De Alti
e51783a1d5 Most of the rules in the avr makefile are not used anymore
and should be removed. In the meantime we change those needed
to upload flash and eeprom to depend on the default contiki rule
to make the .$(TARGET) executable."
2015-09-22 23:32:17 +02:00
Víctor Ariño
561e70b18e Updated current fallback_interface(s) to return int. 2015-09-22 12:53:04 +02:00
Mariano Alvira
552408b241 Merge pull request #685 from SmallLars/mc1322x
Added mc1322x functions: clock_set_seconds, soft_reset, nvm_verify
2015-09-13 12:35:53 -05:00
Mariano Alvira
1ddcdf4886 Merge pull request #839 from gebart/rf230-isr
rf230bb: Handle all IRQ flags in one ISR call. (Q: Is the current ISR valid?)
2015-09-13 12:06:36 -05:00
Mariano Alvira
050275293a Merge pull request #922 from atiselsts/rs230bb_fixes
Atmel 230bb: always increase the rx frame ringbuffer cursor in rf230_read()
2015-09-13 11:58:16 -05:00
Valentin Sawadski
b729dc8985 Don't override LDFLAGS on Linux for the native CPU 2015-09-10 11:13:22 +02:00
Nicolas Tsiftes
8a7e2e5892 Merge pull request #1240 from atiselsts/energest_accuracy
Improve energest accuracy
2015-09-07 15:35:35 +02:00
George Oikonomou
dd640cd229 Merge pull request #1195 from bkozak-scanimetrics/cc26xx_improve_watchdog
CC26xx - various fixes and improvements for the watchdog module
2015-09-04 17:20:50 +01:00
Atis Elsts
2f79810b58 Use ENERGEST_SWITCH to switch between different power modes to improve energest accuracy. 2015-09-04 11:46:00 +02:00
Billy Kozak
b71353181d CC26xx - enable correct IRQ in rf_core_cmd_done_en
Fix for #1229

rf_core_cmd_done_en() was enabling the wrong irq for detecting the
completion of foreground operations. This was causing cc26xx devices
to not wake-up on time when calling lpm_sleep() from transmit().
2015-09-02 12:37:33 -06:00
Billy Kozak
fde3202a3f cc26xx - added optional locking mode for WDT
Added a mode, configurable by the CONTIKI_WATCHDOG_CONF_LOCK_BETWEEN_USE
macro, which locks the WDT register between uses so as to prevent
any accidental modifications
2015-08-31 09:12:16 -06:00
Billy Kozak
22d8a8dd56 cc26xx - implemented watchdog_stop
Also modified watchdog_start so that if we stop and start again the
watchdog timeout will be reset (by calling watchdog_periodic).
2015-08-31 09:12:16 -06:00
Billy Kozak
dfdb0a6487 cc26xx - fixed WDT reloading
According to the TRM, the WDT does not produce a reset until it
expires twice. After expiring the WDT will set the INT flag if it
is unset, and reset the MCU if INT is already set.

Before this patch, watchdog_periodic() only un-sets the INT flag. This
means that the behaviour of watchdog_periodic is underministic in that
the value of the countdown timer will be different depending on
when the function was called.

This patch fixes this behaviour by also reloading the timout value.
2015-08-31 09:10:26 -06:00
Billy Kozak
85555cf6cf Made cc26xx WDT reload configurable with macro
CONTIKI_WATCHDOG_TIMER_TOP sets the reload value of the WDT
2015-08-31 09:10:26 -06:00
Atis Elsts
854494109d Atmel 230bb: always increase the rx frame ringbuffer cursor in rf230_read().
Avoids packet reordering in cases when RF230_CONF_RX_BUFFERS > 1.
2015-08-31 09:56:56 +02:00
Antonio Lignan
37470bbc1b Merge pull request #1055 from sumanpanchal/msp430x-elfloader
Added MSP430x ELFLOADER support to load image with large memory model.
2015-08-27 21:19:27 +02:00
Adam Dunkels
bfb29d2f11 Merge pull request #1116 from cetic/pr-uip-clear-buffer
Add uip_clear_buf() macro and replace all instances of uip_len = 0
2015-08-27 10:27:08 +02:00
Jonas Olsson
01e36532c2 Add support for the CC13xx CPU
This commit:

* Moves all cpu files from cpu/cc26xx to cpu/cc26xx-cc13xx
* Bumps the CC26xxware submodule to the latest TI release
* Adds CC13xxware as a submodule
* Adds support for sub-ghz mode / IEEE 802.15.4g
* Splits the driver into multiple files for clarity. We now have the following structure:
  * A common module that handles access to the RF core, interrupts etc
  * A module that takes care of BLE functionality
  * A netstack radio driver for IEEE mode (2.4GHz)
  * A netstack radio driver for PROP mode (sub-ghz - multiple bands)

This commit also adds tick suppression functionality, applicable to all chips of the CC26xx and CC13xx families. Instead waking up on every clock tick simply to increment our software counter, we now only wake up just in time to service the next scheduled etimer. ContikiMAC-triggered wakeups are unaffected.

Laslty, this commit also applies a number of minor changes:
* Addition of missing includes
* Removal of stub functions
* Removal of a woraround for a CC26xxware bug that has now been fixed
2015-08-23 19:54:42 +01:00
Billy Kozak
feec05cdf2 CC26xx - fix misuse of len variable in read_frame
read_frame was misuing the packet length in the following ways:
- returning non-zero even if buf_len is too short for the packet
- truncating the length to buf_len if len is too long then using the
  truncated (i.e. wrong) length to index into the buffer
- memcpying too many bytes (used buf_len instead of real length)

This commit fixes all of this and adds some code to report
on packet length errors (to match with cc2538 driver).
2015-08-14 12:44:55 -06:00
Billy Kozak
ceb24f656e Improved style of read_frame
- moved variable declaration to top of function in accordance with the
  Contiki style guide
- made function flatter, reduced nesting to improve readability
2015-08-14 12:43:34 -06:00
Billy Kozak
547f8e7aaa Fixed race condition with rf cpu in read_frame
Fixed a race condition that could occur in read_frame because the
dataEntry is set to PENDING before we are finished reading from it.
2015-08-14 12:42:10 -06:00
Oliver Schmidt
5f6a672e23 Merge pull request #1184 from oliverschmidt/master
Adjusted retro target clock to "new" DNS resolver.
2015-08-04 15:39:18 +02:00
Oliver Schmidt
ca2552461e Adjusted retro target clock to "new" DNS resolver.
The DNS resolver requires 1/4 sec clock resolution. The retro targets had a 1/2 sec clock resolution (optimized for the 1/2 sec TCP timer) resulting in DNS resolver timeouts being 0. Therefore the retro target clock resolution is now increased to 1/4 sec.
2015-08-04 13:48:08 +02:00
George Oikonomou
195ada6668 Merge pull request #1107 from phoenix-frozen/cc2530-rf-const-warning
fix minor warning in cc2530-rf driver
2015-08-03 10:28:43 +01:00
Billy Kozak
35919f6836 CC26xx - Enable RX_NOK on DEBUG builds
Enabled the RX_NOK interrupt, if DEBUG or CC26XX_DEBUG_CRC are set
true, for the purpose of monitoring packets with bad CRC
2015-07-20 10:47:06 -06:00
Billy Kozak
99d74e949f CC26xx autoflush bad crc packets
Setting bAutoFlushCrc=1 so that the radio co-processor will
automatically drop packets with bad crc.
2015-07-16 08:58:24 -06:00