mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-12-23 16:29:34 +00:00
213 lines
6.0 KiB
Markdown
213 lines
6.0 KiB
Markdown
Intel Galileo Board
|
|
===================
|
|
|
|
This README file contains general information about the Intel Galileo board
|
|
support. In the following lines you will find information about supported
|
|
features as well as instructions on how to build, run and debug applications
|
|
for this platform. The instructions were only test in Linux environment.
|
|
|
|
Requirements
|
|
------------
|
|
|
|
In order to build and debug the following packages must be installed in your
|
|
system:
|
|
* gcc
|
|
* gdb
|
|
* openocd
|
|
|
|
Moreover, in order to debug via JTAG or serial console, you will some extra
|
|
devices as described in [1] and [2].
|
|
|
|
Features
|
|
--------
|
|
|
|
This section presents the features currently supported (e.g. device drivers
|
|
and Contiki APIs) by the Galileo port.
|
|
|
|
Device drivers:
|
|
* Programmable Interrupt Controller (PIC)
|
|
* Programmable Intergal Timer (PIT)
|
|
* Real-Time Clock (RTC)
|
|
* UART
|
|
* Ethernet
|
|
|
|
Contiki APIs:
|
|
* Clock module
|
|
* Timer, Stimer, Etimer, Ctimer, and Rtimer libraries
|
|
|
|
Standard APIs:
|
|
* Stdio library (stdout and stderr only). Console output through UART 1
|
|
device (connected to Galileo Gen2 FTDI header)
|
|
|
|
Building
|
|
--------
|
|
|
|
Prerequisites on all Ubuntu Linux systems include texinfo and uuid-dev.
|
|
Additional prerequisites on 64-bit Ubuntu Linux systems include
|
|
gcc-multilib and g++-multilib.
|
|
|
|
To build applications for this platform you should first build newlib (in
|
|
case it wasn't already built). To build newlib you can run the following
|
|
command:
|
|
```
|
|
$ ./platform/galileo/bsp/libc/build_newlib.sh
|
|
```
|
|
|
|
Once newlib is built, you are ready to build applications. By default, the
|
|
following steps will use gcc as the C compiler and to invoke the linker. To
|
|
use LLVM clang instead, change the values for both the CC and LD variables in
|
|
cpu/x86/Makefile.x86_common to 'clang'.
|
|
|
|
To build applications for the Galileo platform you should set the TARGET
|
|
variable to 'galileo'. For instance, building the hello-world application
|
|
should look like this:
|
|
```
|
|
$ cd examples/hello-world/ && make TARGET=galileo
|
|
```
|
|
|
|
This will generate the 'hello-world.galileo' file which is a multiboot-
|
|
compliant [3] ELF image. This image contains debugging information and it
|
|
should be used in your daily development.
|
|
|
|
You can also build a "Release" image by setting the BUILD_RELEASE variable to
|
|
1. This will generate a Contiki stripped-image optimized for size.
|
|
```
|
|
$ cd examples/hello-world/ && make TARGET=galileo BUILD_RELEASE=1
|
|
```
|
|
|
|
To also generate an '<application>.galileo.efi' file which is a UEFI [4] image,
|
|
you can run the following command prior to building applications:
|
|
```
|
|
$ cpu/x86/uefi/build_uefi.sh
|
|
```
|
|
|
|
Running
|
|
-------
|
|
|
|
In order to boot the Contiki image, you will need a multiboot-compliant
|
|
bootloader. In the bsp directory, we provide a helper script which builds the
|
|
Grub bootloader with multiboot support. To build the bootloader, just run the
|
|
following command:
|
|
```
|
|
$ platform/galileo/bsp/grub/build_grub.sh
|
|
```
|
|
|
|
Once Grub is built, we have three main steps to run Contiki applications:
|
|
prepare SDcard, connect to console, and boot image. Below follows
|
|
detailed instructions.
|
|
|
|
### Prepare SDcard
|
|
|
|
Mount the sdcard in directory /mnt/sdcard.
|
|
|
|
#### Approach for Multiboot-compliant ELF Image
|
|
|
|
Copy Contiki binary image to sdcard
|
|
```
|
|
$ cp examples/hello-world/hello-world.galileo /mnt/sdcard
|
|
```
|
|
|
|
Copy grub binary to sdcard
|
|
```
|
|
$ cp platform/galileo/bsp/grub/bin/grub.efi /mnt/sdcard
|
|
```
|
|
|
|
#### Approach for UEFI Image
|
|
|
|
Copy Contiki binary image to sdcard
|
|
```
|
|
$ cp examples/hello-world/hello-world.galileo.efi /mnt/sdcard
|
|
```
|
|
|
|
### Connect to the console output
|
|
|
|
Connect the serial cable to your computer as shown in [2].
|
|
|
|
Choose a terminal emulator such as PuTTY. Make sure you use the SCO keyboard
|
|
mode (on PuTTY that option is at Terminal -> Keyboard, on the left menu).
|
|
Connect to the appropriate serial port using a baud rate of 115200.
|
|
|
|
### Boot Contiki Image
|
|
|
|
Turn on your board. After a few seconds you should see the following text
|
|
in the screen:
|
|
```
|
|
Press [Enter] to directly boot.
|
|
Press [F7] to show boot menu options.
|
|
```
|
|
|
|
Press <F7> and select the option "UEFI Internal Shell" within the menu.
|
|
|
|
#### Boot Multiboot-compliant ELF Image
|
|
|
|
Once you have a shell, run the following commands to run grub application:
|
|
```
|
|
$ fs0:
|
|
$ grub.efi
|
|
```
|
|
|
|
You'll reach the grub shell. Now run the following commands to boot Contiki
|
|
image:
|
|
```
|
|
$ multiboot /hello-world.galileo
|
|
$ boot
|
|
```
|
|
|
|
#### Boot UEFI Image
|
|
|
|
Once you have a shell, run the following commands to boot Contiki image:
|
|
```
|
|
$ fs0:
|
|
$ hello-world.galileo.efi
|
|
```
|
|
|
|
### Verify that Contiki is Running
|
|
|
|
This should boot the Contiki image, resulting in the following messages being
|
|
sent to the serial console:
|
|
```
|
|
Starting Contiki
|
|
Hello World
|
|
```
|
|
|
|
Debugging
|
|
---------
|
|
|
|
This section describes how to debug Contiki via JTAG. The following
|
|
instructions consider you have the devices: Flyswatter2 and ARM-JTAG-20-10
|
|
adapter (see [1]).
|
|
|
|
Attach the Flyswatter2 to your host computer with an USB cable. Connect the
|
|
Flyswatter2 and ARM-JTAG-20-10 adapter using the 20-pins head. Connect the
|
|
ARM-JTAG-20-10 adapter to Galileo Gen2 JTAG port using the 10-pins head.
|
|
|
|
Once everything is connected, run Contiki as described in "Running" section,
|
|
but right after loading Contiki image (multiboot command), run the following
|
|
command:
|
|
```
|
|
$ make TARGET=galileo debug
|
|
```
|
|
|
|
The 'debug' rule will run OpenOCD and gdb with the right parameters. OpenOCD
|
|
will run in background and its output will be redirected to a log file in the
|
|
application's path called LOG_OPENOCD. Once gdb client is detached, OpenOCD
|
|
is terminated.
|
|
|
|
If you use a gdb front-end, you can define the "GDB" environment
|
|
variable and your gdb front-end will be used instead of default gdb.
|
|
For instance, if you want to use cgdb front-end, just run the command:
|
|
```
|
|
$ make BOARD=galileo debug GDB=cgdb
|
|
```
|
|
|
|
References
|
|
----------
|
|
|
|
[1] https://communities.intel.com/message/211778
|
|
|
|
[2] https://software.intel.com/en-us/articles/intel-galileo-gen-2-board-assembly-using-eclipse-and-intel-xdk-iot-edition
|
|
|
|
[3] https://www.gnu.org/software/grub/manual/multiboot/multiboot.html
|
|
|
|
[4] http://www.uefi.org/
|