contiki/platform/ev-aducrf101mkxz/README.md

Building Contiki for the EV-ADuCRF101MKxZ Board

On Debian/Ubuntu Linux:

For older versions of Ubuntu (prior to 14.04), add the external package repository that provides recent versions of GCC for ARM:

sudo add-apt-repository -y ppa:terry.guo/gcc-arm-embedded
sudo apt-get update

For all systems, install the required development packages:

sudo apt-get install git make gcc-arm-none-eabi python-serial

Obtain the Contiki source code:

git clone https://github.com/contiki-os/contiki.git

Build Contiki's example-abc:

make -C contiki/examples/rime \
    TARGET=ev-aducrf101mkxz \
    example-abc.ev-aducrf101mkxz.hex

The default radio frequency can optionally be specified on the command-line as follows. A clean rebuild may be needed when changing it:

make -C contiki/examples/rime \
    TARGET=ev-aducrf101mkxz \
    RF_CHANNEL=915000000 \
    clean \
    example-abc.ev-aducrf101mkxz.hex

The code can be flashed to the eval board and tested using adi-cm3sd. Obtain adi-cm3sd:

git clone https://github.com/jimparis/adi-cm3sd.git

Connect the evaluation board using its J-Link board, or any other serial adapter. Flash example-adc and open a terminal by running:

adi-cm3sd/cm3sd.py -a contiki/examples/rime/example-abc.ev-aducrf101mkxz.hex \
    /dev/serial/by-id/usb-SEGGER_J-Link_000541011111-if00

replacing /dev/serial/by-id/usb-SEGGER_J-Link_000541011111-if00 with the path to the correct serial device. Flash the same code on a second evaluation board to see them communicate.

IPv6 Example

Border Router

First, build and run the IPv6 border-router example:

make -C contiki/examples/ipv6/rpl-border-router \
    TARGET=ev-aducrf101mkxz \
    SERIAL_ID='"00001234"' \
    border-router.ev-aducrf101mkxz.hex

adi-cm3sd/cm3sd.py -a contiki/examples/ipv6/rpl-border-router/border-router.ev-aducrf101mkxz.hex \
    /dev/serial/by-id/usb-SEGGER_J-Link_000541011111-if00

After flashing, close the terminal with CTRL-C, then build and run the SLIP tunnel on the host machine:

make -C contiki/tools tunslip6

sudo contiki/tools/tunslip6 \
    -s /dev/serial/by-id/usb-SEGGER_J-Link_000541011111-if00 \
    -B 115200 -v3 aaaa::1/64

Press the RESET button on the eval board, then open the border router home page at: http://[aaaa::3230:3030:3132:3334]/

Web Server

Then, build and flash the IPv6 webserver6 example on another eval board. The different SERIAL_ID ensures that the webserver uses a link-local IP address that is different from that of the border router:

make -C contiki/examples/webserver-ipv6 \
    TARGET=ev-aducrf101mkxz \
    SERIAL_ID='"00005678"' \
    webserver6.ev-aducrf101mkxz.hex

adi-cm3sd/cm3sd.py -a contiki/examples/webserver-ipv6/webserver6.ev-aducrf101mkxz.hex \
    /dev/serial/by-id/usb-SEGGER_J-Link_000541022222-if00

Open the web server's home page at: http://[aaaa::3230:3030:3536:3738]/

On Windows:

Install prerequisites

Install git with default options.

Install MinGW as follows:

• Download and run mingw-get-setup.exe.
• Select Install, Continue, and Continue again.
• Click Basic Setup on the left panel.
• Click the checkbox next to mingw32-base, then click Mark for Installation.
• Select 'Installation -> Apply Changes' from the menu bar.
• Click 'Apply', then close and quit the MinGW installer.

Install toolchain

Contiki can be built with either GCC or IAR:

• GCC: Install GNU Tools for ARM Embedded Processors. Use the "Windows installer" version. Ensure that "Add path to environment variable" is selected in the installer.

• IAR: Install IAR Embedded Workbench.

Building example-abc

Open a shell by right-clicking the desktop or any folder and selecting Git Bash.

Obtain the Contiki source code:

git clone https://github.com/contiki-os/contiki.git

Build Contiki's example-abc:

• GCC

    /c/mingw/bin/mingw32-make -C contiki/examples/rime \
                              TARGET=ev-aducrf101mkxz \
                              example-abc.ev-aducrf101mkxz.hex
  

• IAR

    /c/mingw/bin/mingw32-make -C contiki/examples/rime \
                              IAR=1 \
                              TARGET=ev-aducrf101mkxz \
                              example-abc.ev-aducrf101mkxz.hex
  

Other build options like RF_CHANNEL and SERIAL_ID can be specified as in the Linux instructions above.

Flashing and running

The resulting file contiki/examples/rime/example-abc.ev-aducrf101mkxz.hex can be flashed to the evaluation board using ADI's CM3WSD utility.

Use a terminal emulator (e.g. HyperTerminal) at 115200 baud to see the program output.