contiki/examples/jn516x/tsch/tx-power-verification/README.md
2015-12-17 13:29:42 +01:00

14 lines
704 B
Markdown

The tx-power-control example can be used to check the link between a node and an rpl-border-router.
After a link is established, the following coap rresources are exposed:
node:
Set-Tx-Power: a PUT/POST resource to set the TX power of the device. The firmware in the device will set the
TX power to the nearest available value.
Get-Tx-Power: a GET resource to retrieve the actual Tx power that is set.
rpl-border-router:
Get-RSSI: a GET resource that shows the detected energy level
Get-Last-RSSI:a GET resource that shows the RSSI of the last received packet. When there is only 1 node, Get-Last-RSSI will
show the effect of changing the TX power level on that node.