dos33fsprogs/asm_routines/dos33_routines.s

297 lines
5.5 KiB
ArmAsm
Raw Normal View History

; File I/O routines based on sample code in
; "Beneath Apple DOS" by Don Worth and Pieter Lechner
;; For the disk-read code
;RWTSL EQU $F0
;RWTSH EQU $F1
;DOSBUFL EQU $EE
;DOSBUFH EQU $EF
;FILEML EQU $EC
;FILEMH EQU $ED
;; DOS Constants
OPEN EQU $01
CLOSE EQU $02
READ EQU $03
WRITE EQU $04
DELETE EQU $05
CATALOG EQU $06
LOCK EQU $07
UNLOCK EQU $08
RENAME EQU $09
POSITION EQU $0A
INIT EQU $0B
VERIFY EQU $0C
LOCATE_FILEM_PARAM EQU $3DC
LOCATE_RWTS_PARAM EQU $3E3
FILEMANAGER EQU $3D6
;================================
; read from disk
;================================
2018-02-22 01:32:40 +00:00
; FILENAME pointed to by INH:INL
; OUTH:OUTL trashed
2018-02-24 22:28:10 +00:00
; output buffer: disk_buff
; size to read: read_size
2018-02-18 02:28:30 +00:00
read_file:
jsr LOCATE_FILEM_PARAM ; $3DC entry point
; load file manager param list
; returns Y=low A=high
sta FILEMH
sty FILEML
2018-02-18 02:28:30 +00:00
; ldy #7 ; file type offset = 7
; lda #0 ; 0 = text
; sta (FILEML),y
2018-02-22 01:32:40 +00:00
; copy filename into place
ldy #0
lda #<filename ; combine with below? (filename-8?)
sta OUTL
lda #>filename
sta OUTH
filename_copy_loop:
lda (INL),y ; load byte
beq filename_pad_spaces ; if zero, done
ora #$80 ; convert to apple ascii
sta (OUTL),y ; store out
iny
bne filename_copy_loop
filename_pad_spaces:
lda #$A0 ; filename needs ' ' padded
sta (OUTL),y
iny
cpy #30 ; fill 30 bytes
2018-02-22 01:32:40 +00:00
bne filename_pad_spaces
filename_pad_done:
2018-02-22 01:32:40 +00:00
2018-02-18 02:28:30 +00:00
ldy #8 ; filename ptr offset = 8
lda #<filename
sta (FILEML),y
iny
2018-02-18 02:28:30 +00:00
lda #>filename
sta (FILEML),y
ldx #1 ; open existing file
2018-02-18 02:28:30 +00:00
jsr dos33_open ; open file
bcs error_open
2018-02-18 02:28:30 +00:00
jsr dos33_read ; read buffer
bcc now_close
; got an error
; error 05 is OK (OUT OF DATA)
; because we try to read too much
ldy #$a
lda (FILEML),Y
cmp #5
beq now_close
jmp error_read
now_close:
2018-02-18 02:28:30 +00:00
jsr dos33_close ; close file
bcs error_close
2018-02-18 02:28:30 +00:00
rts
error_open:
lda #$f5
brk
error_read:
ldy #$a
lda (FILEML),y
tay
lda #$f6
brk
error_close:
lda #$f7
brk
;=================================
; get_dos_buffer
;=================================
;
; Dos buffer format
; 0x000-0x0ff = data buffer
; 0x100-0x1ff = t/s list buffer
; 0x200-0x22c = file manager workarea (45 bytes)
; 0x22d-0x24a = file name buffer
; 0x24b-0x24c = address of file manager workarea
; 0x24d-0x24e = address of t/s list buffer
; 0x24f-0x250 = adress of data sector buffer
; 0x251-0x252 = address of file name field for the next buffer
; In DOS, $3D2 points to 0x22d of first buffer
; add 0x24 to get chain pointer
2018-02-18 02:28:30 +00:00
dos33_open:
; allocate one of the DOS buffers so we don't have to set them up
allocate_dos_buffer:
lda $3D2 ; DOS load point
sta DOSBUFH
ldy #0
sty DOSBUFL
buf_loop:
lda (DOSBUFL),Y ; locate next buffer
pha ; push on stack
; we need this later
; to test validity
iny ; increment y
lda (DOSBUFL),Y ; load next byte
sta DOSBUFH ; store to buffer pointerl
pla ; restore value from stack
sta DOSBUFL ; store to buffer pointerh
bne found_buffer ; if not zero, found a buffer
lda DOSBUFH ; also if not zero, found a buffer
2018-02-18 02:28:30 +00:00
bne found_buffer ; no buffer found, exit
sec ; failed
rts
found_buffer:
ldy #0 ; get filename
lda (DOSBUFL),Y ; get first byte
beq good_buffer ; if zero, good buffer
; in use
ldy #$24 ; point to next
bne buf_loop ; and loop
good_buffer:
lda #$78
sta (DOSBUFL),Y ; mark as in use (can be any !0)
keep_opening:
ldy #0
lda #OPEN ; set operation code to OPEN
sta (FILEML),y
ldy #2 ; point to record length
lda #0 ; set it to zero (16-bits)
sta (FILEML),y
iny
sta (FILEML),y
iny ; point to volume num (0=any)
sta (FILEML),y
jsr LOCATE_RWTS_PARAM ; get current RWTS parameters
; so we can get disk/slot info
sty RWTSL
sta RWTSH
ldy #1
lda (RWTSL),y ; get slot*16
lsr a
lsr a
lsr a
lsr a ; divide by 16
ldy #6 ; address of slot
sta (FILEML),y ; store it
ldy #2
lda (RWTSL),y ; get drive
ldy #5 ; address of drive
sta (FILEML),y
filemanager_interface:
ldy #$1E
dbuf_loop:
lda (DOSBUFL),y ; get three buffer pointers
pha ; push onto stack
iny ; increment pointer
cpy #$24 ; have we incremented 6 times?
bcc dbuf_loop ; if not, loop
ldy #$11 ; point to the end of the same struct
; in file manager
fmgr_loop:
pla ; pop value
sta (FILEML),Y ; store it
dey ; work backwards
cpy #$c ; see if we are done
bcs fmgr_loop ; loop
2018-02-18 02:28:30 +00:00
jmp FILEMANAGER ; #3D6
; run filemanager
; will return for us
;====================
; close DOS file
;====================
2018-02-18 02:28:30 +00:00
dos33_close:
ldy #0 ; command offset
lda #CLOSE ; load close
sta (FILEML),y
jsr filemanager_interface
bcs error_close
ldy #0 ; mark dos buffer as free again
tya
sta (DOSBUFL),y
rts
;=========================
; read from dos file
;=========================
2018-02-18 02:28:30 +00:00
dos33_read:
ldy #0 ; command offset
lda #READ
sta (FILEML),y
iny ; point to sub-opcode
lda #2 ; "range of bytes"
sta (FILEML),y
ldy #6 ; point to number of bytes to read
lda #<read_size
sta (FILEML),y ; we want to read read_size bytes
iny
lda #>read_size
sta (FILEML),y
ldy #8 ; buffer address
lda #<disk_buff
sta (FILEML),y
iny
lda #>disk_buff
sta (FILEML),y
jmp filemanager_interface
filename:
2018-02-18 02:28:30 +00:00
; OUT.0
2018-02-22 01:32:40 +00:00
.byte 'I'+$80,'N'+$80,'T'+$80,'R'+$80,'O'+$80
.byte '2'+$80,'.'+$80,'K'+$80,'R'+$80,'W'+$80
2018-02-18 02:28:30 +00:00
.byte $A0,$A0,$A0,$A0,$A0
.byte $A0,$A0,$A0,$A0,$A0
.byte $A0,$A0,$A0,$A0,$A0
.byte $A0,$A0,$A0,$A0,$A0