df0f4356ec
Fix so that MB can still read AY regs after setting INACTIVE state ( #1193 )
2023-03-05 21:09:08 +00:00
a3a89ad156
Phasor/MB: For AY INACTIVE state, bus floats high - so reflect this in 6522 PortA ( fixes #1193 )
2023-03-05 15:43:13 +00:00
500f32071b
Phasor/MB ( #1192 )
...
. For MB: isChipSelected[0] = true. So do this on Reset() or for Phasor when switching to MB mode.
. Add "Notes on Phasor's AY-3-8913 chip-select & r/w"
. Refactor some common code into SY6522::UpdatePortAForHiZ()
2023-03-05 15:37:52 +00:00
7110e92f14
MB/Phasor save-state: persist 'Chip Select' & 'Reg Address Latch Valid' for MB card too
2023-03-04 23:25:53 +00:00
d8e30e56be
Phasor: support discrete LATCH & READ PSG functions ( #1192 )
...
. Recode 'MB_SUBUNIT::state' as a 2-element array
2023-03-04 22:41:07 +00:00
3b53c882ab
Phasor: improve odd Phasor logic for AY1 & AY2 chip select ( #1192 )
2023-03-04 19:38:11 +00:00
34141b0c1d
Phasor:
...
. add 2nd nAYCurrentRegister (Reg. Address Latch) for 2nd AY8913.
. add support for the odd Phasor logic when doing discrete LATCH and WRITE PSG functions.
(keep in sync with mb-audit v1.3)
2023-03-04 18:14:00 +00:00
89eb0cb07b
Mockingboard: After AY is reset, then latched addr isn't valid
...
. Save-state: save all 8 bits of latched addr.
. Debugger: for mini-AY dump, show latched addr (current register shown in white)
2023-03-01 21:01:59 +00:00
db44b15c37
For Phasor (native/Echo+ modes) improve support for null AY chip-select case
2023-02-28 20:42:53 +00:00
453268a302
Add command line: -capslock=off ( #1187 )
2023-02-27 22:42:57 +00:00
9cf3d00288
For Phasor (native/Echo+ modes) support the null AY chip-select case (for eg. mb-audit v0.9)
2023-02-26 21:52:46 +00:00
d612972e6c
Add command line support for hard disk controller (hdc) in slot-5 ( #1033 )
...
. -s5 hdc
. -s5h1 <pathname>
NB. No GUI config support, so no way to plug/unplug HDDs.
2023-02-26 20:42:21 +00:00
0d0adc1f22
Phasor's Echo+: support dual-mono (R copied to L)
2023-02-25 21:25:46 +00:00
abe606b2a6
Alt+Enter: fix regression, as this key combo should default to toggling full screen ( #1188 )
2023-02-25 10:58:53 +00:00
bca99278b6
Simplify Phasor's Echo+ mode's chip-select ( #1183 )
2023-02-21 21:32:11 +00:00
dc029a4700
Fix Phasor's Echo+ mode's dual chip-select ( #1183 )
2023-02-21 21:08:20 +00:00
e3863d47de
Properly catch the use of multiple Z80 cards. (PR #1184 )
2023-02-20 19:57:25 +00:00
cc07dc7f7b
Fix Phasor's Echo+ mode to use correct AYs ( #1183 )
2023-02-19 21:22:44 +00:00
13ee80686c
Phasor: support reading AY8913 regs for Echo+ mode
2023-02-19 18:28:37 +00:00
bcdaa3e1c1
Phasor: support Echo+ mode ( #1183 )
2023-02-19 16:38:06 +00:00
fd8ed23b56
2 small fixes: enum comparison and include. (PR #1182 )
2023-02-19 09:46:07 +00:00
1aa0e38696
Typo in comment
2023-02-17 17:20:56 +00:00
fb11c74d62
Avoid a couple of warnings. (PR #1180 )
2023-02-17 17:18:29 +00:00
b0220169b8
Fix a few Coverity issues ( #470 )
2023-02-05 21:53:51 +00:00
5dd14256c2
CardManager: remove redundant calls. (PR #1179 )
2023-02-05 21:05:57 +00:00
b2926390c8
Remove unused includes. (PR #1178 )
2023-02-05 21:04:45 +00:00
6b176f8ff5
Mockingboard: fix out of bounds access. (PR #1177 )
2023-02-05 21:03:37 +00:00
f03f5e0904
Fix for 6522 counter underflows falsely delaying when IRQ occurs. ( Fixes #1176 )
2023-02-05 11:02:56 +00:00
6a3a3114c7
MB:6522: fix edge case for IRQ not firing for very small latch values. ( Fixes #1175 )
2023-02-04 12:09:19 +00:00
958c71de5f
Phasor save-state v10: load older state's AYs in correct order. ( Fixes #1174 )
2023-01-30 21:27:49 +00:00
749329b99f
Phasor card fixes:
...
. Reset/Power-cycle: revert to PH_Mockingboard mode
. Load state: set SSI263() to 'm_phasorMode'
2023-01-29 19:20:07 +00:00
d61d348f94
Fix comment
2023-01-29 13:37:07 +00:00
cf722ff0cc
Fix so that MockingboardCardMgr asserts IRQ based on the wired-OR sum of all MB card's 6522s. ( Fixes #1173 )
2023-01-29 13:32:55 +00:00
c56d341bdb
Remove old debug code
2023-01-28 20:56:54 +00:00
f73f23c1c7
Refactor Z80Card as a class
2023-01-28 19:58:12 +00:00
3abf0c1753
Cmd line: support removing cards from slot 4,5 and 7 too
2023-01-28 18:44:16 +00:00
71c67cf132
Refactor Mockingboard into a class ( #1171 )
...
Mockingboard or Phasor cards can be inserted into any slot.
Change Config->Sound to that slots 4+5 to be individually selected for the 3 soundcard types.
Add MockingboardCardManager class to manage multiple cards and mix the sound buffers.
2023-01-28 18:15:28 +00:00
597cea1d86
NTSC: Change to NTSC_GetVblBar() from NTSC_GetVideoVert().
...
Debugger: fix video scanner position's visibility (green colour) for SHR - didn't work for lines $C0-C7.
2023-01-14 14:30:12 +00:00
d63a31a043
NTSC: only use accessors to get internal video clock vert/horz values
2023-01-14 14:08:58 +00:00
3d5ed4de04
Debugger: add NTSC_GetVideoVForDebugger() just to get vert position
2023-01-13 21:19:10 +00:00
d31a831ac2
Debugger: Fix for tf when in full-speed ( #1164 )
2023-01-13 21:11:00 +00:00
244799ec5a
Debugger: Fix for bpv when in full-speed ( #1164 )
2023-01-12 21:51:08 +00:00
d532922821
Remove unused var nStartAddress
2023-01-08 12:48:25 -08:00
2a91824873
Debugger 2.9.1.14 Fix disassembly when in middle of data
2023-01-08 12:02:53 -08:00
6303401f54
WinMM first & second joysticks are not always 0 & 1
2023-01-07 12:16:26 +01:00
d01a9ccb40
Debugger: add index bounds checks for zpa and wa cmds
...
. fix zpc
2023-01-05 20:40:42 +00:00
0532edf773
Speaker fade: use proper type
2023-01-03 21:46:51 +00:00
4377441c26
Fix 6502/65C02's D flag for BRK, IRQ, NMI and RESET. ( Fixes #1099 )
2023-01-02 21:41:31 +00:00
ac12f3c294
Fix video junk on RHS edge for TV & Monitor video modes. ( Fixes #1157 )
2023-01-02 11:15:40 +00:00
ad8f43d416
Minor fix for diskii T/S status
2023-01-02 09:14:49 +00:00
f78c20f534
SNESMAX: refactor some code
2023-01-01 20:31:39 +00:00
af9d2a6402
Help: add info about dongle
2023-01-01 19:34:32 +00:00
dee264483a
Save-state: Game I/O Connector: change yaml
2023-01-01 18:47:21 +00:00
4ca6aaea33
Add save-state support for new unit: 'Game I/O Connector'
2022-12-31 19:51:15 +00:00
043bc49f3d
Add a new Registry Configuration interface: "Game I/O Connector" (like Slots).
...
Change Config->Advanced to show 'Game I/O Connector' (instead of 'Copy Protection Dongle').
2022-12-31 17:32:50 +00:00
e5a87b5063
Add support for hardware copy protection dongles in game i/o socket ( #1153 , PR #1154 )
...
Changes:
- Add a drop-down menu to the 'Advanced' tab that lets the user select a dongle in use
- Add a new file "CopyProtectionDongles.cpp" that is a place to put drivers for these.
- Add a driver for the one known dongle we have now - Speed Star
- Modify Joystick.cpp to allow PB0-PB2 to be "pushed" by the protection dongle.
2022-12-16 09:04:29 +00:00
5c0f3d03ad
Support controller-button remapping file for SNES MAX ( #1155 )
...
SNES MAX: Support controller-button remapping (yaml) file from command line. (#1141 , PR #1155 )
2022-12-15 14:45:00 +00:00
9738af1757
Video rendering: fix glitch when in non-'50% Scan lines' mode. ( Fixes #1143 )
2022-11-20 20:54:15 +00:00
7100bfa5b5
Debugger: LBR: support the unset/undefined case (eg. reset to undefined when beginning a new debug session)
2022-11-19 20:39:41 +00:00
0000e8b9c3
Mouse: support VBL even when in 'mouse off' mode. ( Fixes #1138 )
2022-11-17 22:23:20 +00:00
6a1ebe7801
Help: update for Config -> Disk: 'Show Status'
2022-11-17 21:29:20 +00:00
8cd51ba155
Show Disk II Slot 5 status ( #1134 , PR #1137 )
...
. In 2x windowed mode: always show slot 5 Disk II LEDs.
. Add tooltips for slot 5/6 track/sector info (d1 & d2) - shows dec/hex & fractional track position.
- but this track/sector info is now on a UI toggle in the Config -> Disk tab.
. Debugger: add 'DISK SLOT n' - to set current slot of Disk II card
- ie. support 'DISK INFO' for slot 5
2022-11-17 21:08:11 +00:00
8e2ee62d37
Debugger: add new command: 'bpv <vpos,[len]>'
...
. break on video-scanner's vpos matching
. NB. auto disable when hit
2022-10-08 19:19:18 +01:00
a57f2b29a3
Support '-s6 diskii' and '-s6 diskii13' ( #1133 )
...
. so that a diskii card can be re-inserted into an empty slot 6
Improve command line for slots 5&6: -sN diskii and -sN diskii13
. on a restart (or change of config), if that diskii card is already in the slot then ignore
. ie. don't lose the image(s) across a restart
2022-10-06 21:18:14 +01:00
69fa53ab7d
Add command line: '-sN diskii13' to force the diskii card (in slot-N) to use the 13-sector firmware ( #1133 )
2022-10-05 21:29:57 +01:00
259472a877
Fix for Rainbow demo for 50Hz/PAL Color Monitor. ( fixes #1131 )
2022-10-02 21:52:13 +01:00
9df0ea1e21
Video: fix floating bus in new function getVideoScannerAddressTXTorHGR():
...
. when 'in mixed mode && vert >= 160' return text (not hires) video memory
2022-10-02 20:23:54 +01:00
dfaaa2823e
Debugger: Extend watches: 'WA <n> v' to show video scanner address & video data (aux and/or main or shr 4-byte)
2022-10-02 16:28:03 +01:00
32c7babf51
Phasor load save-state:
...
. Fix regression when switched to using correct primary AY8913 (regressed at 1.30.10 and 1.30.11)
. Specifically fixes AppleWin-Test: phasor-fugue.aws.yaml
. NB. bumps Mockingingboard version in save-state to v8
2022-09-24 20:16:19 +01:00
4a7f05ed36
Full-screen: Retain uniform x and y scaling, unless user specifies a full-screen resolution ( #1121 )
2022-09-24 17:13:09 +01:00
3875b7b433
Fix for joystick read ( fixes #1128 )
2022-09-19 14:44:13 +01:00
4c83186545
Add jitter before track seam (under special conditions) ( #1125 , PR #1129 )
...
Use FindTrackSeamWOZ() to find longest run of sync FF/10 nibbles.
Jitter added:
. only for tracks 33.0 and above
. only for tracks with long runs of sync FF/10 of more than 110
Changes:
. DumpTrackWOZ() outputs nibble then zeros (instead of zeros first)
. Debugger: 'disk info' outputs bitOffset (instead of byteOffset+mask)
2022-09-19 11:00:34 +01:00
f300edb5de
1.30.11.1: point-release ( #1127 )
2022-09-02 21:08:25 +01:00
b299a5d701
Debugger: fix 'Search memory' which had an out-by-one range bug for the end-address ( #1127 )
2022-09-01 20:15:34 +01:00
3f40955306
WOZ: fix obscure crash bug. ( Fixes #1126 )
2022-08-30 21:43:20 +01:00
5888a2b4a6
WOZ: Change track head movement positioning to work on bit (not nibble) offset. ( #1022 )
2022-08-21 11:48:42 +01:00
74a664840f
WOZ: Fix for 'Balance of Power' ( #1022 )
2022-08-20 12:54:14 +01:00
c9f5df1e1e
Fix typo in log msg
2022-07-02 16:59:03 +01:00
3ab80d9b9c
Command line: support '-s2 ssc'
2022-06-26 19:06:39 +01:00
bba86863c3
Fix video mode for line-0: Color (PAL Monitor), when mixed GR+TEXT
2022-06-26 16:09:41 +01:00
1095186c0c
Fix printf warning. (PR #1118 )
2022-06-24 22:00:31 +01:00
ccea9d55f8
Disk2: Stepper Control - update comment
2022-06-21 21:19:24 +01:00
de173b2729
Support two adjacent phases turned off in rapid sequence ( #1110 , PR #1116 )
...
Fix for A2osX low-level format for 48-trackl, 192K floppy image
2022-06-20 20:40:39 +01:00
b3e617f1e5
Uthernet II: the real hardware only decodes A0 and A1, so we introduce a 0x03 mask. (PR #1115 )
...
Fixes #1113
2022-06-17 21:27:52 +01:00
3d260e8b78
Avoid sign extension issues in 64 bit. (PR #1112 )
...
If "GetVideo().GetFrameBufferCentringValue() - kOverscanOffsetL" is negative, it causes an overflow.
2022-06-07 21:00:33 +01:00
1b80c7bf16
Debugger: change search path for DebuggerAutoRun.txt
...
. try CurrentDir first, only if this fails then try AppleWin's ProgramDir.
Also: defer DebugInitialize() until later so it can take advantage of -current-dir command line switch.
2022-06-06 19:46:10 +01:00
cd0fdf15ff
Replace/remove StringCat() and friends (PR #1098 )
...
- Simply use std::string
2022-06-05 19:47:40 +01:00
240b1fd6c7
Minor: fix static declaration. (PR #1111 )
2022-06-05 19:46:35 +01:00
bb56b99af5
HDD: change writes so they are done in units of PAGE_SIZE(256B) to match reads
...
. making it easier to reason about DMA breakpoints (as they are now consistent for reads & writes)
2022-06-05 19:41:06 +01:00
80c1150183
SSI263: for amplitude (reg3), now scale the samples and not SetVolume().
...
Reason: calling SetVolume() in Play() is too early, and the previous phoneme won't have completed.
Getting the timing right will be difficult, so better to just manipulate the samples as they get written to the playback buffer.
2022-06-05 12:10:50 +01:00
1e65528763
SC01: use max amplitude
2022-06-03 22:16:20 +01:00
9e9996bee7
SSI263: support reg3's amplitude
2022-06-03 22:09:32 +01:00
22065c6325
Debugger memory breakpoint support for HDD DMA r/w ( #1103 , PR #1109 )
...
When the debugger is active (eg. breakpoints enabled) then trap on HDD r/w's that match the BPM[R|W].
NB. the breakpoint will fire after the whole HDD r/w operation has completed.
2022-06-03 15:34:37 +01:00
a1f6ebe1c9
VidHD: fix debugger mouse-click hit-test issues. ( #1106 )
2022-06-02 21:27:06 +01:00
a41be14015
VidHD: fix minor junk on RHS ( #1106 )
2022-06-02 20:47:13 +01:00
16f66da594
SSI263: support phoneme zero amplitude
...
Refine Phasor native mode's logic for SSI263 access
2022-06-02 20:32:16 +01:00
cd0c3b00f8
Save-state: when loading state, correctly use C3 ROM when INTCXROM=0 && SLOTC3ROM=0. ( Fixes #1108 )
2022-06-02 17:51:57 +01:00
0f750ee167
VidHD fix minor glitches on top, left & right edges ( #1106 )
...
. when changing VideoType (or feature) then clear these 3 edges
2022-05-29 22:00:20 +01:00
8f07479dad
SSI263 phoneme playback bug: ( fixes #1104 )
...
Fix for rare race-condition, where a phoneme could complete immediately before SSI263's interrupt is enabled:
- resulting in A2 code failing to detect SSI263 or speech phrase never completing.
Only ever possible when debugger-stepping or in full-speed mode.
2022-05-29 10:32:11 +01:00
5236bb95b6
Phasor: use correct primary AY8913 for Phasor & MB modes (now checked in mb-audit v1.2)
2022-05-21 11:15:01 +01:00
961625721b
U2: Improve comment ( #1100 )
2022-05-20 08:04:49 +01:00
60cbbb40db
Uthernet II: 2 fixes and minor changes (PR #1100 )
...
* Enable virtual DNS by default.
* Improve handling of header size:
This fixes an issue in UDP, where it would not take the header size into account when deciding how much to read.
* IPRAW socket. Fix an issue where the header would include "our" IP Address.
The doc is not very clear 5.2.3: they say "destination". But for consistency with UDP (5.2.2) where it seems clear that this is the peer's ip, we replace with the "destination" of the socket, or the "source" of the packet.
* minor tweak: signal with SOCK_SYNSENT that a connection is being established.
* remove Socket::myErrno as it serves no purpose.
It is a duplicate of (sn_sr == W5100_SN_SR_SOCK_SYNSENT).
* add some logging when reading/writing on a closed socket.
2022-05-19 19:30:34 +01:00
6a5ea92a4e
Uthernet II: add virtual DNS feature (PR #1097 )
...
Uthernet II: add extended feature to virtualise DNS requests.
. This allows pure TCP/UDP sockets to run *without* MACRAW requests (and so without libpcap).
. Raw sockets will not work.
. Add configuration for Virtual DNS.
libpcap: ensure all functions check if the library is loaded before using it.
Uthernet 1: do NOT overwrite tfe_cannot_use as it should only reflect the availability of npcap on *this* system.
Add Copyright notice, and mention Virtual DNS in html.
2022-05-08 16:26:01 +01:00
ccb4582bf9
Debugger: fixed warning (and a typo)
2022-05-01 15:15:09 +01:00
4063611e71
Debugger: replace sprintf() part 7 final - Debug (PR #1093 )
...
- Add ProfileLine_t to take care of the profile line buffer
- Simplify _SearchMemoryDisplay() without using StringCat()
- Simplify CmdOutputPrint() significantly
2022-05-01 15:01:33 +01:00
47ba87a015
Debugger: replace sprintf() part 6 - Debugger_Disassembler (PR #1092 )
...
- Improve FormatCharCopy() to not buffer overflow
- Improve FormatOpcodeBytes() to not buffer overflow
- Improve FormatNopcodeBytes() to not buffer overflow
- Change FormatDisassemblyLine() to return std::string
2022-05-01 14:24:35 +01:00
b9308b36ea
Debugger: replace sprintf() part 5 - Debugger_DisassemblerData (PR #1091 )
...
- Change _GetAutoSymbolName() to return std::string
2022-05-01 14:08:45 +01:00
0ab10905e4
Fix a couple of warnings from PR#1090 (PR #1094 )
...
* Fix a couple of warnings from PR#1090
* Fix as suggested and further improvement
2022-04-30 10:53:14 +01:00
a5c41dd8ca
Uthernet: check pcap_dispatch() for -ve (error) result too ( #1095 )
2022-04-29 21:03:25 +01:00
93ea5b3e60
WOZ: Improve reading write-protect ( #1078 ) and remove 'm_resetSequencer' var
2022-04-23 18:13:15 +01:00
777d5f6807
Merge pull request #1090 from kiyolee/replace-sprintf-part-4
...
Debugger: replace sprintf() part 4 - Debugger_Display
2022-04-22 08:51:14 -07:00
d4476ac4e7
Merge pull request #1089 from kiyolee/replace-sprintf-part-3
...
Debugger: replace sprintf() part 3 - Debugger_Symbols
2022-04-22 08:50:39 -07:00
d0360937c1
Fix per review
2022-04-21 00:40:46 +10:00
d490b794e9
Fix per review
2022-04-21 00:21:30 +10:00
cb37dd300b
WOZ: Fix for reading write-protect from data register ( #1078 )
2022-04-18 21:13:41 +01:00
6a342c27ce
Debugger: replace sprintf() part 4 - Debugger_Display
...
- Change ColorizeSpecialChar() to return std::string
2022-04-18 08:46:33 +10:00
d83dae3b29
Debugger: replace sprintf() part 3 - Debugger_Symbols
...
- Change _CmdSymbolsInfoHeader() to return std::string
2022-04-18 08:46:15 +10:00
08c730c647
Cmd line: add -wav-speaker <file> & -wav-mockingboard <file>
2022-04-17 16:23:51 +01:00
494aaa04c0
Debugger: replace sprintf() part 2 (PR #1085 )
2022-04-17 11:40:21 +01:00
a5e8ee31a3
Debugger: Improve some for-loops definitions (PR #1084 )
2022-04-17 11:32:03 +01:00
f948a9491a
Debugger: Remove unnecessary alias pointer (PR #1083 )
2022-04-06 20:37:24 +01:00
6e003fd49f
Debugger: replace prefix 'str' with 's' (PR #1082 )
2022-04-06 20:36:24 +01:00
5b50d784d7
Fix for previous commit 05a17d9 - pass a c-string
2022-04-03 19:31:42 +01:00
05a17d9a69
DiskII: fix build error when LOG_DISK_ENABLED = 1
2022-04-03 19:02:59 +01:00
e97be1b836
Debugger: fix console output for 'disk info' cmd
...
. fix to ConsoleBufferPush() which was skipping a char when the line needed to output to a 2nd line
2022-04-03 18:49:36 +01:00
1bcf371309
Debugger: Format changes only (PR #1076 )
2022-04-03 18:15:22 +01:00
01b9061482
Debugger: Rename 'pszCategory' to 'pCategory' (PR #1057 )
2022-03-29 19:53:51 +01:00
0f9e64b298
Debugger: Format changes only - consistent space after keywords (PR: #1072 )
2022-03-27 20:48:26 +01:00
0f7e240841
Debugger: Fix to use logical "&&" for boolean variables (PR #1073 )
2022-03-27 20:44:50 +01:00
eac88a340d
Fix spelling: "seperator" -> "separator" (PR #1071 )
2022-03-25 20:11:33 +00:00
500c2e50b6
Uthernet II: handle TCP connection failure. (PR #1070 )
2022-03-22 19:39:49 +00:00
cdd360bdfe
Uthernet II: implement IPRAW sockets. (PR #1069 )
2022-03-22 19:30:42 +00:00
2d4f60452f
Add ByteToHexStr() and WordToHexStr() (PR #1064 )
...
- Simplify common StrFormat(), especially in Debugger (changes upcoming)
- Add helpers StrAppendByteAsHex() and StrAppendWordAsHex()
- Add helpers StrBufferAppendByteAsHex() and StrBufferAppendWordAsHex() for plain string buffer
2022-03-22 19:19:50 +00:00
b4b29e1ef5
Refactor ParallelPrinter.cpp/h as a C++ class (PR #1067 )
...
Add command line: -s1 parallel.
NB. Only a single Parallel Printer card is supported, and currently it's restricted to slot 1.
2022-03-18 22:04:34 +00:00
cbc0c2cf87
Save-state: wrap string in quotes when it contains comment char '#'. Fixes #1066
2022-03-17 20:14:52 +00:00
a4341aa808
tfesupp: remove all manual string manipulations - just use std::string. (PR #1065 )
2022-03-14 21:12:52 +00:00
00668c2668
Debugger "help <cmd>" : fix formatting.
...
And specifically for "help brk" - split help across an extra line for better readability
2022-03-14 20:50:21 +00:00
169f0b29e8
Slot 3: make the default (ie. vanilla install of AppleWin) have an empty slot 3.
...
. Previously it would default to Uthernet, but there are now other slot 3 card options.
2022-03-13 17:19:21 +00:00
e38e48e3a6
Debugger: replace sprintf() part 1 (PR #1060 )
...
- Add MemoryTextFile_t::PushLineFormat()
- Replace some sprintf() with PushLineFormat()
2022-03-13 16:37:25 +00:00
35ec3fcc7f
Fix crash when in Config GUI -> Disk:
...
. eg. add DiskII in slot-5, cancel, then access $C0Dx
Change IsCardInSlot() to use CardMgr().QuerySlot()
2022-03-13 16:12:01 +00:00
231e6c6d64
Cards: remove special call to InitializeIO() for Disk and Harddisk. (PR #1061 )
2022-03-13 15:45:43 +00:00
be846efc83
Use clear() instread of erase(begin(), end()). (PR #1053 )
2022-03-12 11:19:34 +00:00
51149083e6
Add log msg for power-cycle, and improve debug-check for U1 $Csnn I/O access.
2022-03-12 10:16:38 +00:00
12d1a0e1fe
Card: cleanup interface. (PR #1059 )
...
1) Remove Init()
2) Call Reset() via CardManager
3) Call Destroy() via CardManager (only used by Disks/Harddisk) on WM_DESTROY
The only "real" changes are in CSuperSerialCard: ensure destructor cleans up and remove Destroy().
2022-03-11 22:17:03 +00:00
bbe2a7f8ee
Uthernet II card: support save/load state. (PR #1054 )
...
NB. do not attempt to restore a UDP / TCP socket.
2022-03-07 21:08:31 +00:00
648f832647
Debugger: minor stop-reason refactor
2022-03-02 21:25:04 +00:00
dfb8802763
Replace sprintf() with StrFormat() (PR #1048 )
2022-03-02 21:10:41 +00:00
80f3eaeb91
Various *Name() functions can simply return const std::string& (PR #1049 )
2022-02-28 20:52:18 +00:00
d2004553f1
Remove old tfe.cpp
2022-02-27 18:06:15 +00:00
9f8c4d99af
Add Uthernet II support and make Uthernet I a Card. (PR #1047 )
...
. tfe.cpp renamed to Uthernet1.cpp.
. add class NetworkBackend: common to both U1 and U2 cards, and abstracts Windows/Linux backends.
. modernise error message if WPCAP.DLL is not installed.
2022-02-27 17:26:48 +00:00
tomcw
ThorstenB
Andrea
michaelangel007
Fabrice CARUSO
Matthew D'Asaro
Kelvin Lee
Michael "Code Poet" Pohoreski