tomcw
89eb0cb07b
Mockingboard: After AY is reset, then latched addr isn't valid
...
. Save-state: save all 8 bits of latched addr.
. Debugger: for mini-AY dump, show latched addr (current register shown in white)
2023-03-01 21:01:59 +00:00
tomcw
db44b15c37
For Phasor (native/Echo+ modes) improve support for null AY chip-select case
2023-02-28 20:42:53 +00:00
tomcw
453268a302
Add command line: -capslock=off ( #1187 )
2023-02-27 22:42:57 +00:00
tomcw
9cf3d00288
For Phasor (native/Echo+ modes) support the null AY chip-select case (for eg. mb-audit v0.9)
2023-02-26 21:52:46 +00:00
tomcw
d612972e6c
Add command line support for hard disk controller (hdc) in slot-5 ( #1033 )
...
. -s5 hdc
. -s5h1 <pathname>
NB. No GUI config support, so no way to plug/unplug HDDs.
2023-02-26 20:42:21 +00:00
tomcw
0d0adc1f22
Phasor's Echo+: support dual-mono (R copied to L)
2023-02-25 21:25:46 +00:00
tomcw
abe606b2a6
Alt+Enter: fix regression, as this key combo should default to toggling full screen ( #1188 )
2023-02-25 10:58:53 +00:00
tomcw
bca99278b6
Simplify Phasor's Echo+ mode's chip-select ( #1183 )
2023-02-21 21:32:11 +00:00
tomcw
dc029a4700
Fix Phasor's Echo+ mode's dual chip-select ( #1183 )
2023-02-21 21:08:20 +00:00
ThorstenB
e3863d47de
Properly catch the use of multiple Z80 cards. (PR #1184 )
2023-02-20 19:57:25 +00:00
tomcw
cc07dc7f7b
Fix Phasor's Echo+ mode to use correct AYs ( #1183 )
2023-02-19 21:22:44 +00:00
tomcw
13ee80686c
Phasor: support reading AY8913 regs for Echo+ mode
2023-02-19 18:28:37 +00:00
tomcw
bcdaa3e1c1
Phasor: support Echo+ mode ( #1183 )
2023-02-19 16:38:06 +00:00
Andrea
fd8ed23b56
2 small fixes: enum comparison and include. (PR #1182 )
2023-02-19 09:46:07 +00:00
tomcw
1aa0e38696
Typo in comment
2023-02-17 17:20:56 +00:00
Andrea
fb11c74d62
Avoid a couple of warnings. (PR #1180 )
2023-02-17 17:18:29 +00:00
tomcw
b0220169b8
Fix a few Coverity issues ( #470 )
2023-02-05 21:53:51 +00:00
Andrea
5dd14256c2
CardManager: remove redundant calls. (PR #1179 )
2023-02-05 21:05:57 +00:00
Andrea
b2926390c8
Remove unused includes. (PR #1178 )
2023-02-05 21:04:45 +00:00
Andrea
6b176f8ff5
Mockingboard: fix out of bounds access. (PR #1177 )
2023-02-05 21:03:37 +00:00
tomcw
f03f5e0904
Fix for 6522 counter underflows falsely delaying when IRQ occurs. ( Fixes #1176 )
2023-02-05 11:02:56 +00:00
tomcw
6a3a3114c7
MB:6522: fix edge case for IRQ not firing for very small latch values. ( Fixes #1175 )
2023-02-04 12:09:19 +00:00
tomcw
958c71de5f
Phasor save-state v10: load older state's AYs in correct order. ( Fixes #1174 )
2023-01-30 21:27:49 +00:00
tomcw
749329b99f
Phasor card fixes:
...
. Reset/Power-cycle: revert to PH_Mockingboard mode
. Load state: set SSI263() to 'm_phasorMode'
2023-01-29 19:20:07 +00:00
tomcw
d61d348f94
Fix comment
2023-01-29 13:37:07 +00:00
tomcw
cf722ff0cc
Fix so that MockingboardCardMgr asserts IRQ based on the wired-OR sum of all MB card's 6522s. ( Fixes #1173 )
2023-01-29 13:32:55 +00:00
tomcw
c56d341bdb
Remove old debug code
2023-01-28 20:56:54 +00:00
tomcw
f73f23c1c7
Refactor Z80Card as a class
2023-01-28 19:58:12 +00:00
tomcw
3abf0c1753
Cmd line: support removing cards from slot 4,5 and 7 too
2023-01-28 18:44:16 +00:00
TomCh
71c67cf132
Refactor Mockingboard into a class ( #1171 )
...
Mockingboard or Phasor cards can be inserted into any slot.
Change Config->Sound to that slots 4+5 to be individually selected for the 3 soundcard types.
Add MockingboardCardManager class to manage multiple cards and mix the sound buffers.
2023-01-28 18:15:28 +00:00
tomcw
597cea1d86
NTSC: Change to NTSC_GetVblBar() from NTSC_GetVideoVert().
...
Debugger: fix video scanner position's visibility (green colour) for SHR - didn't work for lines $C0-C7.
2023-01-14 14:30:12 +00:00
tomcw
d63a31a043
NTSC: only use accessors to get internal video clock vert/horz values
2023-01-14 14:08:58 +00:00
tomcw
3d5ed4de04
Debugger: add NTSC_GetVideoVForDebugger() just to get vert position
2023-01-13 21:19:10 +00:00
tomcw
d31a831ac2
Debugger: Fix for tf when in full-speed ( #1164 )
2023-01-13 21:11:00 +00:00
tomcw
244799ec5a
Debugger: Fix for bpv when in full-speed ( #1164 )
2023-01-12 21:51:08 +00:00
michaelangel007
d532922821
Remove unused var nStartAddress
2023-01-08 12:48:25 -08:00
michaelangel007
2a91824873
Debugger 2.9.1.14 Fix disassembly when in middle of data
2023-01-08 12:02:53 -08:00
Fabrice CARUSO
6303401f54
WinMM first & second joysticks are not always 0 & 1
2023-01-07 12:16:26 +01:00
tomcw
d01a9ccb40
Debugger: add index bounds checks for zpa and wa cmds
...
. fix zpc
2023-01-05 20:40:42 +00:00
tomcw
0532edf773
Speaker fade: use proper type
2023-01-03 21:46:51 +00:00
tomcw
4377441c26
Fix 6502/65C02's D flag for BRK, IRQ, NMI and RESET. ( Fixes #1099 )
2023-01-02 21:41:31 +00:00
tomcw
ac12f3c294
Fix video junk on RHS edge for TV & Monitor video modes. ( Fixes #1157 )
2023-01-02 11:15:40 +00:00
tomcw
ad8f43d416
Minor fix for diskii T/S status
2023-01-02 09:14:49 +00:00
tomcw
f78c20f534
SNESMAX: refactor some code
2023-01-01 20:31:39 +00:00
tomcw
af9d2a6402
Help: add info about dongle
2023-01-01 19:34:32 +00:00
tomcw
dee264483a
Save-state: Game I/O Connector: change yaml
2023-01-01 18:47:21 +00:00
tomcw
4ca6aaea33
Add save-state support for new unit: 'Game I/O Connector'
2022-12-31 19:51:15 +00:00
tomcw
043bc49f3d
Add a new Registry Configuration interface: "Game I/O Connector" (like Slots).
...
Change Config->Advanced to show 'Game I/O Connector' (instead of 'Copy Protection Dongle').
2022-12-31 17:32:50 +00:00
Matthew D'Asaro
e5a87b5063
Add support for hardware copy protection dongles in game i/o socket ( #1153 , PR #1154 )
...
Changes:
- Add a drop-down menu to the 'Advanced' tab that lets the user select a dongle in use
- Add a new file "CopyProtectionDongles.cpp" that is a place to put drivers for these.
- Add a driver for the one known dongle we have now - Speed Star
- Modify Joystick.cpp to allow PB0-PB2 to be "pushed" by the protection dongle.
2022-12-16 09:04:29 +00:00
TomCh
5c0f3d03ad
Support controller-button remapping file for SNES MAX ( #1155 )
...
SNES MAX: Support controller-button remapping (yaml) file from command line. (#1141 , PR #1155 )
2022-12-15 14:45:00 +00:00
tomcw
9738af1757
Video rendering: fix glitch when in non-'50% Scan lines' mode. ( Fixes #1143 )
2022-11-20 20:54:15 +00:00
tomcw
7100bfa5b5
Debugger: LBR: support the unset/undefined case (eg. reset to undefined when beginning a new debug session)
2022-11-19 20:39:41 +00:00
tomcw
0000e8b9c3
Mouse: support VBL even when in 'mouse off' mode. ( Fixes #1138 )
2022-11-17 22:23:20 +00:00
tomcw
6a1ebe7801
Help: update for Config -> Disk: 'Show Status'
2022-11-17 21:29:20 +00:00
TomCh
8cd51ba155
Show Disk II Slot 5 status ( #1134 , PR #1137 )
...
. In 2x windowed mode: always show slot 5 Disk II LEDs.
. Add tooltips for slot 5/6 track/sector info (d1 & d2) - shows dec/hex & fractional track position.
- but this track/sector info is now on a UI toggle in the Config -> Disk tab.
. Debugger: add 'DISK SLOT n' - to set current slot of Disk II card
- ie. support 'DISK INFO' for slot 5
2022-11-17 21:08:11 +00:00
tomcw
8e2ee62d37
Debugger: add new command: 'bpv <vpos,[len]>'
...
. break on video-scanner's vpos matching
. NB. auto disable when hit
2022-10-08 19:19:18 +01:00
tomcw
a57f2b29a3
Support '-s6 diskii' and '-s6 diskii13' ( #1133 )
...
. so that a diskii card can be re-inserted into an empty slot 6
Improve command line for slots 5&6: -sN diskii and -sN diskii13
. on a restart (or change of config), if that diskii card is already in the slot then ignore
. ie. don't lose the image(s) across a restart
2022-10-06 21:18:14 +01:00
tomcw
69fa53ab7d
Add command line: '-sN diskii13' to force the diskii card (in slot-N) to use the 13-sector firmware ( #1133 )
2022-10-05 21:29:57 +01:00
tomcw
259472a877
Fix for Rainbow demo for 50Hz/PAL Color Monitor. ( fixes #1131 )
2022-10-02 21:52:13 +01:00
tomcw
9df0ea1e21
Video: fix floating bus in new function getVideoScannerAddressTXTorHGR():
...
. when 'in mixed mode && vert >= 160' return text (not hires) video memory
2022-10-02 20:23:54 +01:00
tomcw
dfaaa2823e
Debugger: Extend watches: 'WA <n> v' to show video scanner address & video data (aux and/or main or shr 4-byte)
2022-10-02 16:28:03 +01:00
tomcw
32c7babf51
Phasor load save-state:
...
. Fix regression when switched to using correct primary AY8913 (regressed at 1.30.10 and 1.30.11)
. Specifically fixes AppleWin-Test: phasor-fugue.aws.yaml
. NB. bumps Mockingingboard version in save-state to v8
2022-09-24 20:16:19 +01:00
tomcw
4a7f05ed36
Full-screen: Retain uniform x and y scaling, unless user specifies a full-screen resolution ( #1121 )
2022-09-24 17:13:09 +01:00
tomcw
3875b7b433
Fix for joystick read ( fixes #1128 )
2022-09-19 14:44:13 +01:00
TomCh
4c83186545
Add jitter before track seam (under special conditions) ( #1125 , PR #1129 )
...
Use FindTrackSeamWOZ() to find longest run of sync FF/10 nibbles.
Jitter added:
. only for tracks 33.0 and above
. only for tracks with long runs of sync FF/10 of more than 110
Changes:
. DumpTrackWOZ() outputs nibble then zeros (instead of zeros first)
. Debugger: 'disk info' outputs bitOffset (instead of byteOffset+mask)
2022-09-19 11:00:34 +01:00
tomcw
f300edb5de
1.30.11.1: point-release ( #1127 )
2022-09-02 21:08:25 +01:00
tomcw
b299a5d701
Debugger: fix 'Search memory' which had an out-by-one range bug for the end-address ( #1127 )
2022-09-01 20:15:34 +01:00
tomcw
3f40955306
WOZ: fix obscure crash bug. ( Fixes #1126 )
2022-08-30 21:43:20 +01:00
tomcw
5888a2b4a6
WOZ: Change track head movement positioning to work on bit (not nibble) offset. ( #1022 )
2022-08-21 11:48:42 +01:00
tomcw
74a664840f
WOZ: Fix for 'Balance of Power' ( #1022 )
2022-08-20 12:54:14 +01:00
tomcw
c9f5df1e1e
Fix typo in log msg
2022-07-02 16:59:03 +01:00
tomcw
3ab80d9b9c
Command line: support '-s2 ssc'
2022-06-26 19:06:39 +01:00
tomcw
bba86863c3
Fix video mode for line-0: Color (PAL Monitor), when mixed GR+TEXT
2022-06-26 16:09:41 +01:00
Andrea
1095186c0c
Fix printf warning. (PR #1118 )
2022-06-24 22:00:31 +01:00
tomcw
ccea9d55f8
Disk2: Stepper Control - update comment
2022-06-21 21:19:24 +01:00
TomCh
de173b2729
Support two adjacent phases turned off in rapid sequence ( #1110 , PR #1116 )
...
Fix for A2osX low-level format for 48-trackl, 192K floppy image
2022-06-20 20:40:39 +01:00
Andrea
b3e617f1e5
Uthernet II: the real hardware only decodes A0 and A1, so we introduce a 0x03 mask. (PR #1115 )
...
Fixes #1113
2022-06-17 21:27:52 +01:00
Andrea
3d260e8b78
Avoid sign extension issues in 64 bit. (PR #1112 )
...
If "GetVideo().GetFrameBufferCentringValue() - kOverscanOffsetL" is negative, it causes an overflow.
2022-06-07 21:00:33 +01:00
tomcw
1b80c7bf16
Debugger: change search path for DebuggerAutoRun.txt
...
. try CurrentDir first, only if this fails then try AppleWin's ProgramDir.
Also: defer DebugInitialize() until later so it can take advantage of -current-dir command line switch.
2022-06-06 19:46:10 +01:00
Kelvin Lee
cd0fdf15ff
Replace/remove StringCat() and friends (PR #1098 )
...
- Simply use std::string
2022-06-05 19:47:40 +01:00
Andrea
240b1fd6c7
Minor: fix static declaration. (PR #1111 )
2022-06-05 19:46:35 +01:00
tomcw
bb56b99af5
HDD: change writes so they are done in units of PAGE_SIZE(256B) to match reads
...
. making it easier to reason about DMA breakpoints (as they are now consistent for reads & writes)
2022-06-05 19:41:06 +01:00
tomcw
80c1150183
SSI263: for amplitude (reg3), now scale the samples and not SetVolume().
...
Reason: calling SetVolume() in Play() is too early, and the previous phoneme won't have completed.
Getting the timing right will be difficult, so better to just manipulate the samples as they get written to the playback buffer.
2022-06-05 12:10:50 +01:00
tomcw
1e65528763
SC01: use max amplitude
2022-06-03 22:16:20 +01:00
tomcw
9e9996bee7
SSI263: support reg3's amplitude
2022-06-03 22:09:32 +01:00
TomCh
22065c6325
Debugger memory breakpoint support for HDD DMA r/w ( #1103 , PR #1109 )
...
When the debugger is active (eg. breakpoints enabled) then trap on HDD r/w's that match the BPM[R|W].
NB. the breakpoint will fire after the whole HDD r/w operation has completed.
2022-06-03 15:34:37 +01:00
tomcw
a1f6ebe1c9
VidHD: fix debugger mouse-click hit-test issues. ( #1106 )
2022-06-02 21:27:06 +01:00
tomcw
a41be14015
VidHD: fix minor junk on RHS ( #1106 )
2022-06-02 20:47:13 +01:00
tomcw
16f66da594
SSI263: support phoneme zero amplitude
...
Refine Phasor native mode's logic for SSI263 access
2022-06-02 20:32:16 +01:00
tomcw
cd0c3b00f8
Save-state: when loading state, correctly use C3 ROM when INTCXROM=0 && SLOTC3ROM=0. ( Fixes #1108 )
2022-06-02 17:51:57 +01:00
tomcw
0f750ee167
VidHD fix minor glitches on top, left & right edges ( #1106 )
...
. when changing VideoType (or feature) then clear these 3 edges
2022-05-29 22:00:20 +01:00
tomcw
8f07479dad
SSI263 phoneme playback bug: ( fixes #1104 )
...
Fix for rare race-condition, where a phoneme could complete immediately before SSI263's interrupt is enabled:
- resulting in A2 code failing to detect SSI263 or speech phrase never completing.
Only ever possible when debugger-stepping or in full-speed mode.
2022-05-29 10:32:11 +01:00
tomcw
5236bb95b6
Phasor: use correct primary AY8913 for Phasor & MB modes (now checked in mb-audit v1.2)
2022-05-21 11:15:01 +01:00
tomcw
961625721b
U2: Improve comment ( #1100 )
2022-05-20 08:04:49 +01:00
Andrea
60cbbb40db
Uthernet II: 2 fixes and minor changes (PR #1100 )
...
* Enable virtual DNS by default.
* Improve handling of header size:
This fixes an issue in UDP, where it would not take the header size into account when deciding how much to read.
* IPRAW socket. Fix an issue where the header would include "our" IP Address.
The doc is not very clear 5.2.3: they say "destination". But for consistency with UDP (5.2.2) where it seems clear that this is the peer's ip, we replace with the "destination" of the socket, or the "source" of the packet.
* minor tweak: signal with SOCK_SYNSENT that a connection is being established.
* remove Socket::myErrno as it serves no purpose.
It is a duplicate of (sn_sr == W5100_SN_SR_SOCK_SYNSENT).
* add some logging when reading/writing on a closed socket.
2022-05-19 19:30:34 +01:00
Andrea
6a5ea92a4e
Uthernet II: add virtual DNS feature (PR #1097 )
...
Uthernet II: add extended feature to virtualise DNS requests.
. This allows pure TCP/UDP sockets to run *without* MACRAW requests (and so without libpcap).
. Raw sockets will not work.
. Add configuration for Virtual DNS.
libpcap: ensure all functions check if the library is loaded before using it.
Uthernet 1: do NOT overwrite tfe_cannot_use as it should only reflect the availability of npcap on *this* system.
Add Copyright notice, and mention Virtual DNS in html.
2022-05-08 16:26:01 +01:00
tomcw
ccb4582bf9
Debugger: fixed warning (and a typo)
2022-05-01 15:15:09 +01:00
Kelvin Lee
4063611e71
Debugger: replace sprintf() part 7 final - Debug (PR #1093 )
...
- Add ProfileLine_t to take care of the profile line buffer
- Simplify _SearchMemoryDisplay() without using StringCat()
- Simplify CmdOutputPrint() significantly
2022-05-01 15:01:33 +01:00
Kelvin Lee
47ba87a015
Debugger: replace sprintf() part 6 - Debugger_Disassembler (PR #1092 )
...
- Improve FormatCharCopy() to not buffer overflow
- Improve FormatOpcodeBytes() to not buffer overflow
- Improve FormatNopcodeBytes() to not buffer overflow
- Change FormatDisassemblyLine() to return std::string
2022-05-01 14:24:35 +01:00
Kelvin Lee
b9308b36ea
Debugger: replace sprintf() part 5 - Debugger_DisassemblerData (PR #1091 )
...
- Change _GetAutoSymbolName() to return std::string
2022-05-01 14:08:45 +01:00
Kelvin Lee
0ab10905e4
Fix a couple of warnings from PR#1090 (PR #1094 )
...
* Fix a couple of warnings from PR#1090
* Fix as suggested and further improvement
2022-04-30 10:53:14 +01:00
tomcw
a5c41dd8ca
Uthernet: check pcap_dispatch() for -ve (error) result too ( #1095 )
2022-04-29 21:03:25 +01:00
tomcw
93ea5b3e60
WOZ: Improve reading write-protect ( #1078 ) and remove 'm_resetSequencer' var
2022-04-23 18:13:15 +01:00
Michael "Code Poet" Pohoreski
777d5f6807
Merge pull request #1090 from kiyolee/replace-sprintf-part-4
...
Debugger: replace sprintf() part 4 - Debugger_Display
2022-04-22 08:51:14 -07:00
Michael "Code Poet" Pohoreski
d4476ac4e7
Merge pull request #1089 from kiyolee/replace-sprintf-part-3
...
Debugger: replace sprintf() part 3 - Debugger_Symbols
2022-04-22 08:50:39 -07:00
Kelvin Lee
d0360937c1
Fix per review
2022-04-21 00:40:46 +10:00
Kelvin Lee
d490b794e9
Fix per review
2022-04-21 00:21:30 +10:00
tomcw
cb37dd300b
WOZ: Fix for reading write-protect from data register ( #1078 )
2022-04-18 21:13:41 +01:00
Kelvin Lee
6a342c27ce
Debugger: replace sprintf() part 4 - Debugger_Display
...
- Change ColorizeSpecialChar() to return std::string
2022-04-18 08:46:33 +10:00
Kelvin Lee
d83dae3b29
Debugger: replace sprintf() part 3 - Debugger_Symbols
...
- Change _CmdSymbolsInfoHeader() to return std::string
2022-04-18 08:46:15 +10:00
tomcw
08c730c647
Cmd line: add -wav-speaker <file> & -wav-mockingboard <file>
2022-04-17 16:23:51 +01:00
Kelvin Lee
494aaa04c0
Debugger: replace sprintf() part 2 (PR #1085 )
2022-04-17 11:40:21 +01:00
Kelvin Lee
a5e8ee31a3
Debugger: Improve some for-loops definitions (PR #1084 )
2022-04-17 11:32:03 +01:00
Kelvin Lee
f948a9491a
Debugger: Remove unnecessary alias pointer (PR #1083 )
2022-04-06 20:37:24 +01:00
Kelvin Lee
6e003fd49f
Debugger: replace prefix 'str' with 's' (PR #1082 )
2022-04-06 20:36:24 +01:00
tomcw
5b50d784d7
Fix for previous commit 05a17d9
- pass a c-string
2022-04-03 19:31:42 +01:00
tomcw
05a17d9a69
DiskII: fix build error when LOG_DISK_ENABLED = 1
2022-04-03 19:02:59 +01:00
tomcw
e97be1b836
Debugger: fix console output for 'disk info' cmd
...
. fix to ConsoleBufferPush() which was skipping a char when the line needed to output to a 2nd line
2022-04-03 18:49:36 +01:00
Kelvin Lee
1bcf371309
Debugger: Format changes only (PR #1076 )
2022-04-03 18:15:22 +01:00
Kelvin Lee
01b9061482
Debugger: Rename 'pszCategory' to 'pCategory' (PR #1057 )
2022-03-29 19:53:51 +01:00
Kelvin Lee
0f9e64b298
Debugger: Format changes only - consistent space after keywords (PR: #1072 )
2022-03-27 20:48:26 +01:00
Kelvin Lee
0f7e240841
Debugger: Fix to use logical "&&" for boolean variables (PR #1073 )
2022-03-27 20:44:50 +01:00
Kelvin Lee
eac88a340d
Fix spelling: "seperator" -> "separator" (PR #1071 )
2022-03-25 20:11:33 +00:00
Andrea
500c2e50b6
Uthernet II: handle TCP connection failure. (PR #1070 )
2022-03-22 19:39:49 +00:00
Andrea
cdd360bdfe
Uthernet II: implement IPRAW sockets. (PR #1069 )
2022-03-22 19:30:42 +00:00
Kelvin Lee
2d4f60452f
Add ByteToHexStr() and WordToHexStr() (PR #1064 )
...
- Simplify common StrFormat(), especially in Debugger (changes upcoming)
- Add helpers StrAppendByteAsHex() and StrAppendWordAsHex()
- Add helpers StrBufferAppendByteAsHex() and StrBufferAppendWordAsHex() for plain string buffer
2022-03-22 19:19:50 +00:00
TomCh
b4b29e1ef5
Refactor ParallelPrinter.cpp/h as a C++ class (PR #1067 )
...
Add command line: -s1 parallel.
NB. Only a single Parallel Printer card is supported, and currently it's restricted to slot 1.
2022-03-18 22:04:34 +00:00
tomcw
cbc0c2cf87
Save-state: wrap string in quotes when it contains comment char '#'. Fixes #1066
2022-03-17 20:14:52 +00:00
Andrea
a4341aa808
tfesupp: remove all manual string manipulations - just use std::string. (PR #1065 )
2022-03-14 21:12:52 +00:00
tomcw
00668c2668
Debugger "help <cmd>" : fix formatting.
...
And specifically for "help brk" - split help across an extra line for better readability
2022-03-14 20:50:21 +00:00
tomcw
169f0b29e8
Slot 3: make the default (ie. vanilla install of AppleWin) have an empty slot 3.
...
. Previously it would default to Uthernet, but there are now other slot 3 card options.
2022-03-13 17:19:21 +00:00
Kelvin Lee
e38e48e3a6
Debugger: replace sprintf() part 1 (PR #1060 )
...
- Add MemoryTextFile_t::PushLineFormat()
- Replace some sprintf() with PushLineFormat()
2022-03-13 16:37:25 +00:00
tomcw
35ec3fcc7f
Fix crash when in Config GUI -> Disk:
...
. eg. add DiskII in slot-5, cancel, then access $C0Dx
Change IsCardInSlot() to use CardMgr().QuerySlot()
2022-03-13 16:12:01 +00:00
Andrea
231e6c6d64
Cards: remove special call to InitializeIO() for Disk and Harddisk. (PR #1061 )
2022-03-13 15:45:43 +00:00
Kelvin Lee
be846efc83
Use clear() instread of erase(begin(), end()). (PR #1053 )
2022-03-12 11:19:34 +00:00
tomcw
51149083e6
Add log msg for power-cycle, and improve debug-check for U1 $Csnn I/O access.
2022-03-12 10:16:38 +00:00
Andrea
12d1a0e1fe
Card: cleanup interface. (PR #1059 )
...
1) Remove Init()
2) Call Reset() via CardManager
3) Call Destroy() via CardManager (only used by Disks/Harddisk) on WM_DESTROY
The only "real" changes are in CSuperSerialCard: ensure destructor cleans up and remove Destroy().
2022-03-11 22:17:03 +00:00
Andrea
bbe2a7f8ee
Uthernet II card: support save/load state. (PR #1054 )
...
NB. do not attempt to restore a UDP / TCP socket.
2022-03-07 21:08:31 +00:00
tomcw
648f832647
Debugger: minor stop-reason refactor
2022-03-02 21:25:04 +00:00
Kelvin Lee
dfb8802763
Replace sprintf() with StrFormat() (PR #1048 )
2022-03-02 21:10:41 +00:00
Kelvin Lee
80f3eaeb91
Various *Name() functions can simply return const std::string& (PR #1049 )
2022-02-28 20:52:18 +00:00
tomcw
d2004553f1
Remove old tfe.cpp
2022-02-27 18:06:15 +00:00
Andrea
9f8c4d99af
Add Uthernet II support and make Uthernet I a Card. (PR #1047 )
...
. tfe.cpp renamed to Uthernet1.cpp.
. add class NetworkBackend: common to both U1 and U2 cards, and abstracts Windows/Linux backends.
. modernise error message if WPCAP.DLL is not installed.
2022-02-27 17:26:48 +00:00
tomcw
514d2adb79
6522: Fix IFR.T2 when counter.b15=1
2022-02-26 21:10:42 +00:00
tomcw
c277c5152d
Fix a few medium Coverity defects:
...
1514566, 1063811
2022-02-26 20:23:00 +00:00
tomcw
707993b686
Fix LogOutput() to call StrFormatV()
2022-02-26 18:39:39 +00:00
Kelvin Lee
253a59fde6
Replace sprintf_s() and wsprintf() with StrFormat(). (PR #1041 )
...
And these Debugger related:
. Improve FormatAddress() and GetSymbol().
. GetSymbol(), FindSymbolFromAddress(), FormatAddress() are changed to use std::string instead.
. Remove static variable (not nice) in FormatAddress().
. GetSymbol() returns std::string reference instead of pointer.
2022-02-26 17:54:06 +00:00
Andrea
9ad6b11cf9
Fix some format errors. (PR #1042 )
2022-02-26 17:15:09 +00:00
Kelvin Lee
5a5d0e2df4
Debugger: Simplify console print (PR #1038 )
...
. Simplify console display functions using StrFormat()
. Update TestDebugger that needs StrFormat() now
2022-02-17 22:12:04 +00:00
tomcw
43b9df253a
Fix build errors from PR #1039
2022-02-16 20:14:40 +00:00