Commit Graph

113 Commits

Author SHA1 Message Date
tomcw
771d9b1328 1.30.8.0: Update History.txt 2022-02-08 20:32:02 +00:00
tomcw
0f2d4b1878 1.30.7.0: Update History.txt 2021-12-19 19:28:50 +00:00
TomCh
443545b0f6
Support SHR video modes with a VidHD card (#997, PR #1004)
Support VidHD in slot 3 (via Config GUI or '-s3 vidhd') for SHR video modes only.
- AppleWin window is slightly enlarged when VidHD card is inserted.
Support IIgs 320x200 (and fill mode) and 640x200 video modes.
Debugger: add 'shr' command to view video
CUI: Allow user to specify width & height (for full-screen); and allow separate x,y scaling in full-screen mode.
2021-11-30 21:41:02 +00:00
TomCh
5ed901f720
Slot-independent HDD firmware (#996, PR #998)
. Move the 'read block' command into the emulator - to mirror the write command
. With emulated time to do the DMA for the r/w block command
2021-11-09 21:04:57 +00:00
tomcw
4d14d719b9 1.30.6.0: Update History.txt 2021-10-29 21:14:13 +01:00
tomcw
35e2e62b86 1.30.5.0: Update History.txt 2021-09-28 21:40:42 +01:00
TomCh
685b93f387
Add 4Play & SNES MAX card support (#946, #972, PR #982)
Support these new cards in slots 3, 4 or 5; based on code from Lukazi.
- extend Configuration's Input prop sheet page.
- add save/load snapshot for both cards.
- add command line switch for alt controller type (for SNES MAX card).
Change to using Registry's 'Configuration\Slot 3' for slot 3 cards (Uthernet, 4Play & SNES MAX).
Update help doc.
2021-09-10 13:57:55 +01:00
tomcw
7f2dd9727d 1.30.4.0: Update History.txt 2021-08-29 12:31:48 +01:00
TomCh
7b55e994ec
Config GUI for DiskII card in slot-5 & improved slot config in Registry (#975, #977, PR #978)
Change to using Registry's 'Configuration\Slot n' for disk ii image pathnames (was 'Preferences').
Delete Registry's 'Configuration\Slot n' section each time there's a change of card.
Add same functionality to conf.ini.
LoadConfiguration(): load from the new Slot-n section (or otherwise the old legacy key).
Only update Registry's 'Starting Directory' for s6,d1.
Update help doc.
2021-08-29 11:39:51 +01:00
tomcw
1fe557855a 1.30.3.0: update History and minor change to Help doc 2021-06-19 15:15:32 +01:00
tomcw
182bed5825 1.30.2.0 & update History.txt 2021-05-31 20:09:51 +01:00
tomcw
b15abd0ba9 Bump version to 1.30.1.0, and update History.txt 2021-05-03 20:05:06 +01:00
tomcw
83ae73387a Bump version to 1.30.0.0. Update History.txt, and some updates to help doc 2021-04-17 18:15:33 +01:00
tomcw
62ade07746 Resource: bump (c) year 2021-02-19 15:54:22 +00:00
tomcw
8be128159c 1.29.16.0: Updated version & History.txt 2020-11-01 18:20:41 +00:00
tomcw
98b72658b7 1.29.15.0: Updated version, History.txt & help 2020-10-25 18:41:22 +00:00
tomcw
b5739b862a Adjusted the Config PropSheetPage to widen the Video Mode's combo box.
Renamed a few globals & made static.
Removed a few VS2008 'int to bool' perf warnings.
2020-09-28 20:27:41 +01:00
tomcw
f13d220203 Config: fixed the tab-stops for the Disk prop sheet page (#817)
. Ethernet setting combo: extended to fit the whole Guid
2020-08-22 15:23:43 +01:00
tomcw
d9f3d1e667 1.29.14.0: Updated version, History.txt and help 2020-08-17 21:49:10 +01:00
Iván Izaguirre
36e318e344
Support 'Copam Base 64A' - a Taiwanese Apple II clone (#806) (PR #807)
. It's an Apple II plus clone.
. The 48K bank-switched Rom is controlled with AN0 and AN1.
. The character generation video Rom has two full character sets: English and German (F10 to switch).
NB. At the prompt, "TEST" runs the ROM self-test.
2020-07-06 20:24:16 +01:00
tomcw
105d0d77d8 1.29.13.0: Updated version and History.txt 2020-05-31 16:39:50 +01:00
michaelangel007
2b9adac338 Debugger: 2.9.1.0 Bookmarks now have their own indicator 2020-05-19 08:37:15 -07:00
tomcw
2508d3b875 1.29.12.0: Updated version and History.txt 2020-04-26 18:10:32 +01:00
TomCh
dd2914a38e
Support Apple II J-Plus model (#773, PR #776)
. Added II-JPlus rom & video rom
. Added new apple2jp model
. Fixed support for AN3 for II/II+ models (nothing to do with J-Plus support)
2020-04-02 20:17:32 +01:00
tomcw
427cb9312b 1.29.11.0: Updated version 2020-03-27 20:31:06 +00:00
TomCh
21d16d3a0c
Auto-switch DiskII firmware to 13 or 16 sector depending on disk in drive-1 (#734) (PR #761)
. The auto-switch is done on each reset, or on inserting a disk at the start-up screen (MODE_LOGO).
. The Window's title include '(S6-13)' if DiskII card has 13-sector f/w.
. The debugger's 'disk info' cmd will show FW13 or FW16 depending on f/w.
2020-02-22 11:38:25 +00:00
tomcw
fc8753501f 1.29.10.0: Updated version 2020-02-13 19:39:35 +00:00
tomcw
41efaad92f 1.29.9.0: Updated version & History.txt 2020-01-26 21:34:02 +00:00
tomcw
ccb589af5a 1.29.8.0: Updated version, History.txt and Resource/Help's copyright year
Added DebuggerAutoRun.txt
2020-01-19 15:36:31 +00:00
tomcw
045d7b6509 Config: Input: Added 'Swap 0/1' toggle for swapping buttons 0 & 1 2020-01-18 19:06:06 +00:00
tomcw
75bc648f01 1.29.7.0: Updated version, History.txt and Help 2019-12-20 15:23:54 +00:00
tomcw
91f1294220 1.29.6.0: Updated version and History.txt 2019-11-18 15:11:55 +00:00
tomcw
dd3ecf738f 1.29.5.0: Updated version and History.txt 2019-11-10 22:08:24 +00:00
tomcw
a889e6f0d4 1.29.4.0: Updated version and History.txt 2019-10-24 19:27:48 +01:00
tomcw
34b0c33cb1 1.29.3.0: Updated version and History.txt. Updated help. 2019-10-11 22:42:06 +01:00
tomcw
94926b4f55 HDD: Fixed SmartPort return address wrong when crossing page + some space-saving optimisations (Fixes #319) 2019-10-05 17:01:35 +01:00
tomcw
4b4a86722c 1.29.2.0: Updated version and History.txt 2019-09-06 20:09:42 +01:00
tomcw
581546c1e9 1.29.1.2: test updated/fixed TV rendering for #650 2019-09-01 16:50:02 +01:00
tomcw
bad963026c 1.29.1.1: test improved TV modes for #650. Use Ctrl-9 to toggle 1.29.1.0 and 1.29.1.1. 2019-08-30 21:58:03 +01:00
tomcw
d97032739e 1.29.1.0: Updated version and history.txt 2019-07-27 20:50:13 +01:00
tomcw
65e1d9a80e 1.29.0.0: Updated version, history.txt & help. 2019-07-08 21:46:52 +01:00
TomCh
bd86088c59
Support 50Hz(PAL) (#648) (PR #658)
- Added Configuration GUI to include checkbox for "50Hz"
- Implicitly use PAL or NTSC base 6502 clocks depending on video refresh rate
- Added new -50hz and -60hz command line switches
- Updated save-state for video refresh rate

1.28.8.0: Updated version & history.txt
2019-06-28 21:34:34 +01:00
tomcw
51802257aa 1.28.7.0: Updated version & history.txt 2019-06-15 22:38:31 +01:00
tomcw
9a7424e704 1.28.6.0: Updated version & history.txt 2019-06-02 17:41:51 +01:00
tomcw
dad590b8c1 Bumped to 1.28.5.0 and updated History.txt
Updates for DHGR MIX (#633):
. Support new switch -rgb-card-invert-bit7 to invert bit7 for Dragon Wars.
  - Reverted DHGR MIX mode and AN2 off to invert bit7
2019-04-06 17:31:26 +01:00
tomcw
4d9a3edd48 1.28.4: Bumped version & updated History.txt 2019-03-16 15:09:54 +00:00
TomCh
b87ebb7514
Support better RGB fro hires video (#616) (PR #630)
For the RGB hires look-up table:
- extended to include the previous video byte's high bit
- so it's now: {previous high bit + prev 2 video bits + next 2 video bits} & current byte

For all the RGB look-up tables:
- reduced from 512 to 256 lines (only 256 were being used, so it was just wasting space)

Refactored CopyMixedSource():
- fixed the Rainbow demo (#627)
- sped up in Debug config

Bumped version to 1.28.3.1.
2019-03-16 12:49:09 +00:00
tomcw
82c2f3d142 1.28.3.0: Vertical blend: Changed CopyMixedSource() to operate on 14M pixel (was 7M) - #616 2019-03-02 15:54:22 +00:00
TomCh
082b22d753
Support vertical blending for 'RGB (Color Monitor)' for hires (#616) (PR #624)
Support the old AppleWin 1.25 vertical blending for hires:
- extended Config dialog to include 'Vertical Blend' checkbox
- Persist 'Video Styles' to Registry
- new cmd line options to select this style & also select 'RGB (Color Monitor)'
- code refactor to support enum VideoStyle_e (and replaced g_uHalfScanLines with a bit in g_eVideoStyles)

Bumped version to 1.28.2.0.
2019-02-24 15:59:35 +00:00
tomcw
d0d9c0ce31 1.28.1: Bumped version & updated History.txt 2019-02-02 16:11:06 +00:00