Commit Graph

1775 Commits

Author SHA1 Message Date
tomcw
2fdc270837 SSC: Make default baud-rate consistent (9600) 2018-05-05 16:56:15 +01:00
tomcw
ba090ebcef SSC: Change DIPSW1's baud rate to 9600 (was 19200) & reflect this change in the help doc for SSC 2018-04-23 21:34:09 +01:00
tomcw
54d159c044 Help: Updated command-line to only describe -dcd (ie. removed -dsr, -dtr switches). 2018-04-22 15:22:05 +01:00
tomcw
a7a4ee28cc Help: Added a new help page about AppleWin's SSC emulation. (Fixes #554) 2018-04-22 15:16:51 +01:00
tomcw
52e7d61c7e SSC:
. DCD state is now a mirror of DSR unless -dcd switch is used. (Fixes #553)
. Removed -dsr,-dtr switches, so -modem is now an alias for -dcd.  (Also for #553)
. Wait for events (RLSD,DSR,CTS) in CommThread and call GetCommModemStatus() in CommThread.
2018-04-22 14:37:59 +01:00
michaelangel007
279fdf523b Debugger: Add HELP CD todo, mention cycle profiling done 2018-04-20 11:26:00 -07:00
michaelangel007
03983f8c08 Add more ideas 2018-04-20 10:56:36 -07:00
michaelangel007
0b298f3995 Moved debugger wanted features to docs/Debugger_Wishlist.txt 2018-04-20 10:49:10 -07:00
michaelangel007
10d68a3308 Debugger: 2.9.0.15: Cleanup: HELP CALC examples and See also. 2018-04-17 09:45:45 -07:00
michaelangel007
74c6739542 Debugger: Added HELP CALC see also: HELP OP 2018-04-17 09:43:06 -07:00
michaelangel007
c449ef12b7 Debugger: Clarify HELP CALC operators 2018-04-17 09:33:56 -07:00
michaelangel007
e852d91031 Debugger: Add examples for HELP CALC 2018-04-17 09:32:58 -07:00
michaelangel007
858586d646 Debugger: Cleanup output order of HELP CALC 2018-04-17 09:32:11 -07:00
michaelangel007
f9bc18f54c Debugger: Fix spelling 2018-04-17 09:30:59 -07:00
michaelangel007
9105019e11 Fixed: Debugger 2.9.0.14: HELP JSR 2018-04-17 07:16:21 -07:00
michaelangel007
8a9ddda46a 2.9.0.13: Add profiler cycles 2018-04-15 13:35:58 -07:00
michaelangel007
c938cdf188 Add: DiskFormatTrack.cpp 2018-04-15 09:39:07 -07:00
tomcw
4ab5aa1e7c SSC work:
. SSC: For TCP mode, support DSR, DCD & CTS status bits (#308).
. SSC: Now DTR must also be set to enable interrupts (in addition to the respective Tx/Rx interrupt bit).
. SSC: When reading the Status register, throttle calls to GetCommModemStatus() to a maximum of once every 8ms.
2018-04-14 21:15:41 +01:00
tomcw
1ed484eb01 1.27.2: Bump version & update History.txt 2018-04-12 21:59:51 +01:00
tomcw
2900816167 Removed duplicate extern FILE* g_fh 2018-04-08 17:48:08 +01:00
TomCh
a78f1e04da
SSC: Support for TX IRQ and other SSC updates (#552)
. Support TX IRQ for both TCP and COM modes (fixes #522)
. Support CTS/RTS (fixes #311)
. Fixed reading DIPSW registers
. Fixed TCP mode which was only generating an IRQ for first byte received
. Added UpdateCommandReg() to consolidate all updates to SSC command reg
. Updated reference URLs
2018-04-08 17:37:26 +01:00
tomcw
598b20fb52 Refactor: Use INTCXROM instead of SLOTCXROM to be consistent with UTAIIe (fixes #419) 2018-04-06 22:36:54 +01:00
tomcw
ccd68d95b5 1.27.1: Bump version & update History.txt 2018-04-05 21:50:37 +01:00
tomcw
419238bb54 Added cmd-line option: -s7 empty to remove the HDD Controller card from slot 7 2018-04-05 21:33:36 +01:00
tomcw
2ba55e0c12 Fix Swap Disk regression (fixes #543) 2018-04-02 18:21:18 +01:00
tomcw
9be3864f32 Added cmd-line options -h1,-h2 for specifying HDDs - #398 2018-04-02 12:38:05 +01:00
tomcw
d7de4908cd Add comment for the reason that reset doesn't affect memmode & videomode for II and II+ models.
Add accessor for memmode, make static and replace extern refs with GetMemMode().
2018-03-19 18:49:08 -07:00
tomcw
8dcc5d50ca Added a comment about HD_Insert() - #541 2018-03-10 14:30:18 +00:00
tomcw
2d2304b4c6 AppleWin's Config>Benchmark, reported a "Pure CPU MHz" which was not a good indicator of unthrottled speed for v1.26+, as it was still getting the emulator to do full NTSC/cycle-accurate video update. The reality (when in full-speed/unthrottled mode) is that the video is only refreshed at 16.6ms (wall-clock).
So added a 2nd "Pure CPU MHz" for full-speed (ie. no video update), eg:

---------------------------
Benchmarks
---------------------------
Pure Video FPS:	2860 hires, 2868 text
Pure CPU MHz:	10.3 (video update)
Pure CPU MHz:	241.3 (full-speed)

EXPECTED AVERAGE VIDEO GAME
PERFORMANCE: 476 FPS

(ref: #424, #540)
2018-03-03 22:01:03 +00:00
tomcw
d9accc82c5 Refactor codebase by renaming nCyclesLeft to uExecutedCycles (#540) 2018-03-03 21:27:50 +00:00
tomcw
93f57c0970 Logging: allowing logging of PrintScreen even when switch is used to suppress MsgBox 2018-02-28 21:23:20 +00:00
tomcw
d4a3c5c28f PrintScreen key: Improve UI feedback when any of the 3 registrations fails & log failures (fixes #547)
Also tweak to full-speed: consolidating 2 calls to DiskII module into 1 call.
2018-02-27 21:07:16 +00:00
tomcw
552d8fcc7b Remove old debug timing code (#540) 2018-02-26 21:34:01 +00:00
tomcw
6c031e7930 Disk II: changing 'enhancedisk' doesn't cause a restart + added accessors (fixes #546) 2018-02-25 15:09:25 +00:00
tomcw
e1286de7a9 Disk II: 'Swap Disks' only swaps disk (not drive properties) - fixes #543 2018-02-25 14:05:45 +00:00
tomcw
92504e0751 Refactor of Disk.cpp and Disk.h in preparation for #543.
Changed struct Disk_t:
. Added new struct Drive_t with "has-a" relationship to Disk_t
. Split properties of drive into Drive_t and properties of disk into Disk_t
2018-02-25 13:38:04 +00:00
Andrea
70540bd6dc Fix the following errors reported by VS2017 Code Analysis. (#414)
* Fix the following errors reported by VS2017 Code Analysis.

applewin\source\applewin.cpp(761): warning C6385: Reading invalid data from '"Disk Image"':  the readable size is '11' bytes, but '21' bytes may be read.
applewin\source\debugger\debug.cpp(6624): warning C6386: Buffer overrun while writing to 'sName':  the writable size is '31' bytes, but '32' bytes might be written.
applewin\source\debugger\debugger_display.cpp(3715): warning C6053: The prior call to 'strncpy' might not zero-terminate string 'sText'.
applewin\source\log.cpp(42): warning C6053: The prior call to '_vsnprintf' might not zero-terminate string 'output'.
applewin\source\debugger\debug.cpp(2759): warning C6011: Dereferencing NULL pointer 'pFont'.
applewin\source\debugger\debugger_symbols.cpp(243): warning C6053: The prior call to '_tcsncpy' might not zero-terminate string 'pText'.
applewin\source\diskimagehelper.cpp(1132): warning C6053: The prior call to '_tcsncpy' might not zero-terminate string 'pszExt'.
applewin\source\diskimagehelper.cpp(1141): warning C6053: The prior call to '_tcsncpy' might not zero-terminate string 'szFilename'.
applewin\source\parallelprinter.cpp(242): warning C6053: The prior call to '_tcsncpy' might not zero-terminate string 'g_szPrintFilename'.

The one about RegSetValue(), according to Microsoft

https://msdn.microsoft.com/en-us/library/windows/desktop/ms724922(v=vs.85).aspx

the last argument cbData is ignored, so I set it to 0, as in some cases was anyway wrong (see "DiskImage").


Signed-off-by: Andrea Odetti <mariofutire@gmail.com>

* Use sizeof() rather than hardcoded value.
Fix one more case on non terminated string.


Signed-off-by: Andrea Odetti <mariofutire@gmail.com>
2018-02-24 15:24:37 +00:00
Andrea
6051bc55d0 Changes to ease code compilation in gcc. (#541)
Changes to ease code compilation in GCC.

Disk_t and HDD contain a std::string and for this reason they need a proper constructor, ZeroMemory is not guaranteed to work.
2018-02-24 15:12:40 +00:00
tomcw
20022d999d Minor: use global floppylatch 2018-02-24 13:18:26 +00:00
tomcw
dc565dd28c Removed extra local var and updated DOS 3.2 INIT comment 2018-02-23 22:39:51 +00:00
tomcw
a07d087467 Improve logging and fix asserts for DOS 3.2 INIT (#537) 2018-02-15 21:54:15 +00:00
tomcw
82fdf1ab6a DiskII: allow reading of write-protect state when in write mode (#537) 2018-02-11 14:52:21 +00:00
tomcw
2295964c5f Help: Document behaviour of Caps Lock (fixes #535) 2018-02-08 22:14:20 +00:00
tomcw
095827cf6f readme.md: updated for 1.27.0.0 2018-02-03 17:39:22 +00:00
tomcw
f012326b88 History.txt: fix 1.27.0.0 date 2018-02-03 16:06:40 +00:00
tomcw
7fd616a4ae AppleWin.chm: remove this, as it has never been kept up to date 2018-02-02 21:31:16 +00:00
tomcw
ae7ffff1c0 History.txt: update with #519 2018-02-02 21:27:12 +00:00
tomcw
9c7f71ee8c Help: Update full-speed info now that floating-bus is supported 2018-02-02 21:21:18 +00:00
tomcw
839812ab7d Debugger: OutputTraceLine() - add single-step comment 2018-02-02 21:10:46 +00:00
tomcw
2c8f5ce864 Support floating-bus in full-speed mode (#508, #519, #532) 2018-02-02 20:19:48 +00:00