* Mem dump cmds without any args will now display the prefix address
* Support data sub-window (that reflects m1 dump)
* Breakpoint display: Right align R and W at end of line
* Help doc: Update Memory page to include prefix address examples
* Help doc: Update Breakpoint & Memory pages: add images showing address prefixes as shown in the UI
---------
Co-authored-by: michaelangel007 <michaelangel007@sharedcraft.com>
Better support the IIe's aux slot when it's empty or has the 80-col(1KiB) card.
- any h/w using this alternate CPU emulation, (ie. aux=empty or 80-col(1KiB)), then the 'mem' cache is completely bypassed.
Debugger: change all the direct 'mem' accesses to go via ReadByteFromMemory().
TestCPU6502: test the alt CPU emulation code too.
. Allow up to 256 x 64KiB banks
. Persist aux slot's mem card's "Number of Banks" to Registry
. LoadConfiguration() now restores aux card from Registry - don't need to pass cmd line each time
. Update help docs
Add new command line switch: -aux <empty|std80|ext80|rw3>
Add 6502/65C02 x normal/debugger alt read support for CPU emulation (#1353).
Fix bug in MemReadFloatingBus() reading from mem[] - no good, if MF_AUXREAD is set.
Support odd 80-col text video mode when aux slot is empty:
. add a new videoMode flag for VF_80COL_AUX_EMPTY.
Correctly support 80COL & DHIRES soft-switches when aux slot is empty or with std80 card.
Support VidHD's SHR with -aux <empty|std80>.
Save-state: support aux slot empty or with std80 card.
Added new SmartPort Harddisk Controller (HDC) firmware for Enhanced //e. (@burniouf)
. remove the old DOSMaster entrypoints.
. firmware ID byte (at $FE) defaults to 4 ProDOS block devices (was 2 with older v2 f/w).
Enhanced //e defaults to using SP f/w, and older Apple II's still use the older v2 f/w.
Support up to 8 units per HDC (currently limited to 4GiB capacity for each unit).
Save-state: save HDC firmware in state file.
New slot-specific switches to configure each HDC's firmware: -s<N> -hdc-[sp|bm2|bm4].
New switch to select old non-SP firmware for all HDCs: -hdc-firmware-v2.
. Command line config only, and only permitted in slot 3 for now.
. Save-state Unit v9: Extended: memory (added 'Last Slot to Set Main Mem LC', 'MMU LC Mode').
. Add LanguageCardManager class.
. Add user-protection when unchecking HDD controller (as images aren't restored on a 'cancel')
. Fix possible crash when removing (via Config->Disk) either Disk2 card(s5) or HDD card(s7), then cancelling during emulation
. Fix m_buf[] size
Fixed debugger main "data" window behaviour:
. When activating the main data display ("data" command) the cursor keys wouldn't work until the minidump ("md1") was also enabled. NB. The cursor keys should work in the main data window, independently of whether the minidump is active.
. It's an Apple II plus clone.
. The 48K bank-switched Rom is controlled with AN0 and AN1.
. The character generation video Rom has two full character sets: English and German (F10 to switch).
NB. At the prompt, "TEST" runs the ROM self-test.
. During init: only need to call IoHandlerCardsOut() when loading save-state
. MemInitialize() -> MemReset() -> ResetPaging() which always inits memmode
. The auto-switch is done on each reset, or on inserting a disk at the start-up screen (MODE_LOGO).
. The Window's title include '(S6-13)' if DiskII card has 13-sector f/w.
. The debugger's 'disk info' cmd will show FW13 or FW16 depending on f/w.
. Support DHGR MIX mode and AN2 off to invert bit7 (undocumented)
. Improve the video-mode precondition to check for 80COL access occurring before $C05F
* Refactor Language Card:
. MemSetPaging() now not used for $C080-C08F accesses.
- Instead LC registers its own I/O handler like all other slot 1-7 cards.
. Saturn uses base LC's 16K for bank0
* Move all 'modechanging = 0' to UpdatePaging()
Support for #408:
* added slot-0 LC and Saturn 128K for Apple II and II+
* added save-state support
- for slot-0 LC/Saturn, save the LC state in the slot-0 card, not the //e MMU; and switch to a new Apple2 unit ver2
* added g_Slot0, g_SlotAux
* added new LanguageCard.cpp/h to project and moved Saturn code into these new files.
* updated VS2013,2015,2017 projects
1) Uthernet card now returns floating bus for slot ROM at $Cs00-CsFF (where s=3).
2) Fixed IoHandlerCardsIn() to not map in the card in slot3's slot ROM when SLOTC3ROM=0.
Also:
. moved the typedef 'iofunction' from common.h to memory.h
. Improved break on FB or IO: account for slot empty (or not) & if expansion ROM enable
Memory:
. IORead_Cxxx(): Fix for Apple II support for when slot-3 is empty
. Apple II type was erroneously testing //e soft-switches
. Fixed save-state v2 bug where Mockingboard's card ROM was erroneously mapped in (instead of internal $C100-CFFF ROM)
. Added Cybernoid-TimerAtC480.aws.yaml to test both
