tomcw
1670e0dbc0
Fix for AppleWin-Test:
...
. don't load floppy/harddisk images (in Registry's Config) if also loading a save-state via cmd-line.
. done to prevent MessageBox alerts when deleted disk images can't be found.
Info: Registry contains refs to disk images, but on test clean-up, the images get deleted.
2021-12-11 18:01:46 +00:00
Andrea
177c9fec05
Make Slot 0 more consistent with other slots. (PR #1006 )
2021-12-11 15:26:09 +00:00
tomcw
010d3525d3
HDD read: error if reading block to ROM ( #1007 )
2021-12-11 15:11:13 +00:00
tomcw
2de04b35c5
Help: Update debugger info for 'brk' cmd
2021-12-11 14:32:00 +00:00
tomcw
0ac210b132
Debugger: Extend 'brk' cmd:
...
. brk all <on|off>
Fix 'brk' cmd for invalid opcodes of length 2 & 3
2021-12-11 13:41:34 +00:00
tomcw
1ab0d56558
HDD: remove magic numbers & add GH ref ( #1007 )
2021-12-10 19:37:58 +00:00
tomcw
bb6fa80335
HDD r/w: error if r/w overlaps with I/O memory
...
. break to debugger if single-stepping
HDD write: support memory accesses across 64KiB boundary
2021-12-09 21:22:13 +00:00
tomcw
c594d6e101
VidHD: Fix SHIFT+PRINTSCRN for 320x200
2021-12-07 21:59:05 +00:00
TomCh
443545b0f6
Support SHR video modes with a VidHD card ( #997 , PR #1004 )
...
Support VidHD in slot 3 (via Config GUI or '-s3 vidhd') for SHR video modes only.
- AppleWin window is slightly enlarged when VidHD card is inserted.
Support IIgs 320x200 (and fill mode) and 640x200 video modes.
Debugger: add 'shr' command to view video
CUI: Allow user to specify width & height (for full-screen); and allow separate x,y scaling in full-screen mode.
2021-11-30 21:41:02 +00:00
Andrea
0b2104cc89
Card::Save/LoadSnapshot (PR #1003 )
...
Add 2 virtual methods to Card to load and save snapshots.
2021-11-25 20:23:21 +00:00
tomcw
abc631432d
HDD: fix edge-case for old save-state m_buf_ptr
2021-11-15 20:26:53 +00:00
TomCh
01f89f88eb
Joystick: Remove buttonlatch & BUTTONTIME ( #1002 )
2021-11-14 17:40:15 +00:00
Andrea
2e04ce348a
Add Card::Update() (PR #1000 )
...
And use it in ContinueExecution()
2021-11-13 18:13:01 +00:00
Andrea
8662a99179
Add InitializeIO() to Card and CardManager (PR #999 )
...
. Card::InitializeIO() is pure virtual
. CardManager::InitializeIO() initialises all cards
2021-11-11 21:45:55 +00:00
tomcw
25caffe7eb
Minor comment typo
2021-11-11 21:24:41 +00:00
tomcw
6282790c3d
Add comments to both Harddisk.cpp & the firmware code about 'sta abs16,x' false-reads, etc.
...
Harddisk.cpp: Fix typos and update the notes on the r/w commands' operation.
2021-11-11 21:20:54 +00:00
TomCh
5ed901f720
Slot-independent HDD firmware ( #996 , PR #998 )
...
. Move the 'read block' command into the emulator - to mirror the write command
. With emulated time to do the DMA for the r/w block command
2021-11-09 21:04:57 +00:00
tomcw
d96ed5b8c5
Refactor: move m_slot into Card class
2021-11-01 21:01:28 +00:00
tomcw
67b3c28833
Refactor: remove slot from InitializeIO() calls for card objects
2021-11-01 20:39:26 +00:00
TomCh
ff7c9dc185
Make harddisk a class ( #995 )
...
. Add user-protection when unchecking HDD controller (as images aren't restored on a 'cancel')
. Fix possible crash when removing (via Config->Disk) either Disk2 card(s5) or HDD card(s7), then cancelling during emulation
. Fix m_buf[] size
2021-11-01 20:12:42 +00:00
Andrea
830030ee05
Simplify logic around CConfigNeedingRestart (PR #955 )
2021-10-31 12:14:47 +00:00
tomcw
992a79075b
For the pre-build event (TestCPU6502), don't echo the message for the VS2019 platform toolset.
...
NB. still needed for v141_xp toolset.
2021-10-30 14:53:21 +01:00
tomcw
4d14d719b9
1.30.6.0: Update History.txt
2021-10-29 21:14:13 +01:00
tomcw
5dd5d563b0
Debugger help: update for 'brkint on|off'
2021-10-28 21:09:36 +01:00
tomcw
ac2233149b
Debugger: Change 'brkint' params to on/off for consistency
2021-10-28 21:00:18 +01:00
tomcw
ca611eaa64
Mousecard: fix persisting card in slot-4 after a VM restart. ( Fixes #993 )
2021-10-19 21:56:19 +01:00
tomcw
fa18382757
Core emulation: simplify NMI & IRQ handling
2021-10-18 21:45:45 +01:00
tomcw
18f5fafb30
DiskII: Remove superfluous IsDiskImageWriteProtected()
2021-10-18 21:13:37 +01:00
Andrea
f2843d4d71
Collections of changes to facilitate compilation on Linux and macOS. (PR #992 )
2021-10-18 20:23:46 +01:00
TomCh
9553106f4e
Debugger: Add IRQ support to LBR and new command to Break on Interrupt ( #987 , PR #990 )
...
Extend LBR so that it includes the control-flow on a taken interrupt
Add a new command 'brkint <0|1>' to support Break on Interrupt
Internal: in core emulation loop, moved IRQ/NMI check to start of loop so that just the "interrupt vectoring" case can be single-stepped (instead of previously opcode + interrupt vector).
Debugger help chm: update Breakpoints section to include BRK, BRKOP and BRKINT
2021-10-16 16:57:00 +01:00
tomcw
4f8b30506d
Debugger: Fix LBR so it's updated only if branch is taken ( #987 )
2021-10-16 11:58:09 +01:00
tomcw
8575238d69
Debugger: Add a simple LBR command
2021-10-15 21:58:17 +01:00
tomcw
4c73a8003a
Fix TestDebugger (currently only used by VS2008 sln)
2021-10-15 21:08:16 +01:00
tomcw
eee2400984
Uthernet: removed unused Bittypes.h & Pcap-stdinc.h
2021-10-15 21:02:57 +01:00
tomcw
028c041175
Debugger: fix for 6502 JMP (ABS) - compute correct NMOS target address
2021-10-15 20:36:04 +01:00
Ralph Irving
2e63c0c07f
Add FourPlay and SNESMAX support to VS2008 project. ( #986 )
...
Co-authored-by: Ralph Irving <ralph.irving@gmail.com>
2021-10-10 20:26:11 +01:00
tomcw
aa7d0cf240
Fix one shot paddle timers ( fixes #985 )
2021-10-04 22:08:37 +01:00
tomcw
e43d188e0f
1.30.5.0 - fix release date
2021-10-02 17:27:53 +01:00
tomcw
51e42d1d4e
SNES MAX: load state: defaulting to no buttons pressed
2021-10-02 15:28:54 +01:00
tomcw
4cb8a6414d
Uthernet: fix -load-state so that tfe_init() is called
2021-10-02 12:56:55 +01:00
tomcw
1f04d1548a
Remove 'Disks' folder and the 3 .dsk images (CP/M, NSC, SAM)
2021-09-29 20:40:23 +01:00
tomcw
35e2e62b86
1.30.5.0: Update History.txt
2021-09-28 21:40:42 +01:00
tomcw
b6c71201cf
Uthernet: remove tfe/tfe_packetpage allocations
2021-09-22 20:46:28 +01:00
tomcw
a50fcf2850
Help: update cards supported by save-state
2021-09-21 21:39:44 +01:00
TomCh
4aa6e05528
Support Uthernet save-state ( #984 )
...
Uthernet card: support save/load state
2021-09-21 21:32:14 +01:00
tomcw
10a83eed61
SAM card: refactor as a class, and support save/load state
2021-09-18 11:55:29 +01:00
tomcw
f85e175328
Debugger help: document how to allow CTRL+SHIFT+0 to work (to set bookmark-0)
2021-09-17 21:16:24 +01:00
TomCh
ed298b4fd9
Improve save-state card management (PR #983 )
...
Initially all cards are removed before loading save-state.
Use new Registry "Configuration/Slot 2" location to save SSC's port name.
Use new Registry "Configuration/Slot 7" location to save HDV's image names.
Use new Registry "Configuration/Slot n" (and "Configuration/Slot Auxiliary") locations to save all other card types.
Command line: -s<slot> (eg. -s7 empty) now get persisted to the Registry.
Only update 'HDV Starting Directory' for slot7 & drive1.
2021-09-17 20:43:10 +01:00
tomcw
1b8d26051e
Fix for command line with multiple spaces between args. ( #981 )
2021-09-10 14:51:57 +01:00
tomcw
35b83765db
Fix for command line -d2 (and -h2): if image can't be opened, this is now reported as an error. ( #980 )
2021-09-10 14:38:40 +01:00