function as there is no gracefull way of handling failures.
Rename bb_getport to bb_lookup_port, allow a default port to be
specified so it always returns a correct value.
Modify ftpgetput/rdate/wget to use the new interface.
wget/rdate now use etc/services with a falback default value.
Erik, I think we have met online some time ago when I was in Corel/Rebel
Netwinder project....
Anyway, I would like to use BB on 2.6.0 initrd. 1.00-pre4 works OK, if
insmod is actually presented with a full path to the module. Otherwise -
problems (not to mention conflicts when 2.4 modutil is enabled)
Here are some patches for insmod and modprobe which try to walk around
the default ".o" module format for 2.2/2.4 modules (you have probably
noticed it is now .ko in 2.6 ;-)) Trying to steal as little space as
possible if 2.6 not enabled...
The modprobe is still not perfect on 2.6 - seems to be jamming on some
dependencies, but works with some (to be debugged). Anyway after the
patches it at least tries to work....
Will there be a 1.00-pre5 coming any time soon?
Thanks, Woody
You will find in the attached file "syslog.patch" a patch which adds
config options to set at compile time the size of the circular buffer,
and some documentation update.
* The "rdate.patch" file makes rdate to NOT settimeofday if the date to be
set equals current date. This prevents the system from experiencing nasty time
discontinuities caused by sub-second changes, with a protocol that has only
over second resolution. Depending on your taste, the "fprintf(stderr..." may be
removed.
Hi to all,
here is a new patch for bb's devfsd. The news are:
1) Size reduction for the basic setup with no options compiled in from :
text data bss dec hex filename
10591 392 543 11526 2d06 devfsd.o
rw-r--r-- 1 root root 18536 Dec 18 21:52 devfsd.o
to:
text data bss dec hex filename
9303 392 543 10238 27fe devfsd.o
rw-r--r-- 1 root root 16528 Dec 18 22:02 devfsd.o
With this setup you should not expect much output from devfsd
( just at start or with -v) and if some error occurs it only exits 1.
To have more output enable: " Increases logging (and size)" (+1568 b).
2) The option "Adds function names to program output" was removed from config menu
and now to enable debug output you can use bb's standard option:
"Build BusyBox with Debugging symbols".
Be careful as with this option enabled a lot of data are outputted to /dev/log and/or to stderr.
3) A new option: "Enables the -fg and -np option" was added to config menu (+128 b).
BTW: option "Adds support for MODLOAD keyword in devsfd.conf" adds 268 b.
4) The following keywords in devsfd.conf are supported:
"CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE",
"PERMISSIONS", "EXECUTE", "COPY", "IGNORE", "MKOLDCOMPAT",
"MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT".
But only if they are written UPPERCASE!!!!!!!!
5)Help text in usage.h was modified.
6)Something that I have forgotten..........
I've tested this for the last week on my box and it seems to work as expected.
Thanks in advance and please apply.
Ciao,
Tito
Another issue I found was with the iproute utility. While using another
program I found that it failed because the "ip route del" command was
not found. I looked at the full iproute implementation and this command
exists. The busybox version has the "ip route delete" command. I have
created a patch which makes the "ip route del" command an alias to the
"ip route delete" command.
Hello,
I have been using busybox for some time now, for an ARM based platform.
I was very pleased when I tried the 1.00preX series, with all the new
utilities and daemons.
I found out that the ifupdown in busybox does not behave exaclty like
the debian version. Then the pre-up script fails, the interface is
getting up. Also when the post-up script fails the return value is
ignored. Actually everything is always run and the return value is
always true. I looked at the original implementation from debian and
fixed the busybox version to do the same. A patch is attached if anyone
is interested.
