"As noticed today by Steven Scholz, the od's `-v' was broken.
I've fixed that and now both the flags `-v' and `-a' are OK"
Fixes a segfault in
echo "uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu\02bar\4"| ./busybox od -av
Support for /etc/modprobe.conf (for 2.6 kernels) should likely be added
to bb's modprobe, see attached patch.
modprobe.conf is just a (even simpler) variant of modules.conf
"I have a need to _really_ know if the interface was properly configured
via ifup so I made busybox's ifupdown pass the return codes through rather
than dropping them on the floor."
"All the functions in ifupdown.c return 1 on success and 0 on failure
(which happens to the opposite of standard practices but whatever).
So it is important for all these functions to not blindly return 1."
"The problem with blindly returning ret, even if it is != 1, is the
callers expect a 0 or 1 and accumulate the return codes. So a function that
makes 3 calls to execute will have a value of 3 accumulated. That value
of 1 (success) was almost always returned even if 1 of the commands in the
command sequence failed. The attached patch fixes the lack of checking
to verify thar result == expected_reult."
Hello,
the attached patch should bring extra/config in line
with the Linux 2.6.7 sources.
The following are the commit messages for the respective
files from the Linux bk-repository:
checklist.c:
* fix menuconfig choice item help display
confdata.c:
* config: choice fix
* kconfig: don't rename target dir when saving config
expr.c, expr.h:
* config: disable debug prints
mconf.c:
* fix menuconfig choice item help display
menu.c:
* Kconfig: use select statements
symbol.c:
* config: choice fix
* Avoid bogus warning about recursive dependencies
* c99 struct initialiser conversions
textbox.c:
* janitor: don't init statics to 0
util.c:
* fix lxdialog behaviour
//Peter
Hi,
There was some problem with busybox modprobe. For details see
http://www.busybox.net/lists/busybox/2004-May/011507.html
I made a patch against busybox-1.00-pre10 to fix that one.
This is a slight variant of Patrick's patch with a slightly
cleaner implementation of mod_strcmp()
-Erik
Hi,
Package: BusyBox
Version: 1.0.0-pre10
When an incomplete read or write from/to a local file occurs (i.e.
not an EOF condition), the tftp client prematurely exits. This
problem can be reproduced by slowly piping data to the tftp client
like this:
(for v in 1 2 3; do echo $v; sleep 1; done) | \
tftp -p -l - -r output.txt <host>
The output file on the TFTP server will contain "1".
The attached patch provides a possible solution to this problem.
I can reproduce this on ARM sa1110 and ARM xscale boards, both
running Linux-2.6.4 & glibc-2.3.2. Thanks for the wonderful
program!
Robin
