A mailing list thread in September 2013 discussed changing the string
returned by the non-POSIX 'uname -o' option. Nothing ever came of this
because there was no agreement as to what the string should be.
Make the string configurable so that people can decide for themselves.
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Test explicitly for REOPEN flags: update_num_lines is called
unconditionally so (num_lines != NOT_REGULAR_FILE) is also true when
num_lines contains a valid number of lines.
The call to fstat doesn't need to be in #if ENABLE_FEATURE_LESS_FLAGS:
the whole function is already in such a test.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add testcases for -B and single line changes.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fix -B with single line changes. They were always ignored regardless
if they were blank or not.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When read_lines tests whether a character will fit on the current
line it checks the *next* character but in case of overflow doesn't
display the *current* one. This results in the last column of the
terminal never being used.
The test in re_wrap (used when the terminal width changes or line
numbers are enabled/disabled) is different: it does allow the use
of the final column.
function old new delta
read_lines 764 770 +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 6/0) Total: 6 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Much of the code refers to lines using indices into the flines
array (which splits lines into portions that fit on the terminal).
In some cases this is wrong and actual line numbers should be
used:
- when lines are being truncated rather than wrapped (-S flag)
- when line numbers have been entered by the user
Also fix a bug in numeric input and improve the display at EOF.
function old new delta
goto_lineno - 111 +111
cap_cur_fline - 101 +101
buffer_to_line - 56 +56
buffer_up 35 66 +31
less_main 2606 2615 +9
goto_match 125 127 +2
buffer_down 81 56 -25
buffer_line 64 - -64
------------------------------------------------------------------------------
(add/remove: 3/1 grow/shrink: 3/1 up/down: 310/-89) Total: 221 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add a function to package the test that detects whether enough has
been read from the file to allow a screenful to be displayed.
Also use this to determine when to display '(END)' in the status
line. The previous code was incomplete and didn't handle truncated
lines (-S flag) properly.
function old new delta
at_end - 63 +63
status_print 111 109 -2
read_lines 819 764 -55
getch_nowait 319 264 -55
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/3 up/down: 63/-112) Total: -49 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Move the code to detect non-regular files to the point where the
file is being opened. If num_lines == READING_FILE guarantees
that the file is regular.
Detect when a file becomes unreadable between it first being opened
and the call to update_num_lines. Mark the file as being non-regular
so we don't try that again.
function old new delta
reinitialize 197 245 +48
update_num_lines 159 127 -32
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 48/-32) Total: 16 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Currently when you disable fancy echo, escape sequences are hardcoded
enabled (e.g. as if you used `echo -e` all the time). The opposite
behavior is more desirable (always disable -e support) because:
* This seems to contradict the spirit of the kconfig help text (where
it says enable support for -n/-e flags), although you could say that
we aren't supporting the -e flag directly as `echo -e` will show the
-e flag.
* POSIX makes escape sequences optional, and even says they are there
only on XSI-conformant systems.
* It saves space (~100 bytes on x86_64).
* It makes things faster!
* It makes it behave more like bash where you need an explicit -e flag
in order for escape sequences to be interpreted.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
In commit b5c7220e7b
"fbset: respect rgba configuration lines in fb.modes"
I somehow managed to swap the offset/length markers around.
The man page for fb.modes says it should be offset/length
not length/offset as I was accidentally parsing it.
As my fb.modes file was also reversed I didn't notice
until I tried someone elses fb.modes file. Mea culpa.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
While RFC1035 recommends a label not to start with a number, there is
actually no such limitation in dns. One may buy a domain name like
0x1.net and use it.
This commit remove this check and allow a user to use such domains.
Signed-off-by: Arthur Gautier <baloo@gandi.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Make verbose status messages (-m/-M flags) behave more like the
real `less` command:
- fix display of line numbers so they're correct whether lines are
being truncated (-S flag) or wrapped.
- don't display total lines or percentage when lines are read from
stdin: we don't have that information until we reach EOF. When
we do reach EOF the additional information is displayed.
- when lines are read from a file count the total number of lines
so that we can display percentages. Counting lines is avoided
until the information is actually needed. If the user pages to
EOF the separate read pass can be avoided entirely.
Fixes Bug 7586
function old new delta
m_status_print 195 382 +187
safe_lineno - 35 +35
reinitialize 172 182 +10
read_lines 675 685 +10
buffer_fill_and_print 178 169 -9
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/1 up/down: 242/-9) Total: 233 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Based on the patch by Ari Sundholm <ari@tuxera.com>
function old new delta
sync_main 20 163 +143
packed_usage 30653 30673 +20
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 163/0) Total: 163 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Introduce a library routine to package the idiom:
p = xmalloc(b, n);
memcpy(p, b, n);
and use it where possible. The example in traceroute used xzalloc
but it didn't need to.
function old new delta
xmemdup - 32 +32
last_main 834 826 -8
make_device 2321 2311 -10
common_traceroute_main 3698 3685 -13
readtoken1 3182 3168 -14
procps_scan 1222 1206 -16
forkchild 655 638 -17
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/6 up/down: 32/-78) Total: -46 bytes
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Lines are rewrapped when the terminal width changes or line numbers
are enabled/disabled. The current calculation always adds eight to
the line length for a tab whereas it should only add enough to move
to the next tab stop.
This doesn't affect the display of lines, which is handled elsewhere
and gets tab stops right, but it does cause lines to be wrapped at
the wrong position.
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Line numbers are displayed incorrectly on lines that have a search
pattern highlighted. The problem can be fixed by moving the call to
lineno_str in print_found above the while loop that alters the value
of the line pointer. However, a more substantial rewrite results in
savings.
function old new delta
buffer_print 688 697 +9
.rodata 156077 156045 -32
lineno_str 85 - -85
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/1 up/down: 9/-117) Total: -108 bytes
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The -S flag, to cause long lines to be truncated, was enabled by
FEATURE_LESS_DASHCMD. This is non-obvious and -S is useful even
if the '-' command isn't enabled.
function old new delta
.rodata 156045 156077 +32
packed_usage 30223 30244 +21
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 53/0) Total: 53 bytes
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Now that the only thing protected by setjmp/longjmp is the saved string,
we can allocate it on the stack to get rid of the jump.
Based on commit bd35d8e from git://git.kernel.org/pub/scm/utils/dash/dash.git
by Herbert Xu.
function old new delta
readtoken1 3182 3116 -66
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-66) Total: -66 bytes
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit 503a0b8 from git://git.kernel.org/pub/scm/utils/dash/dash.git
by Herbert Xu says:
>The parsebackquote flag is only used in a test where it always has the
>value zero. So we can remove it altogether.
The first statement is incorrect: parsebackquote is non-zero when
backquotes (as opposed to $(...)) are used for command substitution.
It is possible for the test to be executed with parsebackquote != 0 in
that case.
The test is question checks whether quotes have been closed, raising
the error "unterminated quoted string" if they haven't. There seems
to be no good reason to allow unclosed quotes within backquotes. Bash,
hush and dash (after commit 503a0b8) all treat the following as an error:
XX=`"pwd`
whereas BusyBox ash doesn't. It just ignores the unclosed quote and
executes pwd.
So, parsebackquote should be removed but not for the reason stated.
function old new delta
parsebackquote 1 - -1
readtoken1 3222 3182 -40
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-41) Total: -41 bytes
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Adding support to install individual binaries if the option is
enabled. This also installs the shared libbusybox.so.* library.
Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
No need of explicit NULL check before free.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Akhilesh Kumar <akhilesh.k@samsung.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since there are now more statements in the if block after the while loop
in list_i2c_busses_and_exit(), there's no need for a label.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Split i2cdump_main() into shorter functions. Simplify the code a bit.
Make block an array of ints so that we can store negative results of
read functions (fixes a bug found by Denys Vlasenko).
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
We should only warn the user about addresses to be skipped if
(mode == DETECT_MODE_AUTO).
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Addresses 0x00-0x02 shouldn't be scanned by default. This patch makes
'first' default to 0x03 and only enables lower addresses if '-a' option
is passed
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
We can't use i2c_set_slave_addr() in i2cdetect, as we have to check for
EBUSY after calling ioctl(I2C_SLAVE) and print 'UU' on busy addresses
instead of bailing-out.
While we're at it: reorder definitions of local vars in i2cdetect_main().
function old new delta
i2cdetect_main 703 744 +41
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 41/0) Total: 41 bytes
text data bss dec hex filename
826097 4164 9584 839845 cd0a5 busybox_old
826145 4164 9584 839893 cd0d5 busybox_unstripped
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Additionally, open(2) failures do not make the program die immediately.
This makes the behavior of the program match coreutils more closely.
function old new delta
truncate_main 161 221 +60
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The commit
ash: move parse-time quote flag detection to run-time
breaks pattern substitution in parameter expansion. Fix this and
revise the code so that the different handling of the pattern and
the replacement string takes place in rmescapes rather than the
separate function parse_sub_pattern.
function old new delta
rmescapes 227 273 +46
static.qchars 3 4 +1
subevalvar 1177 1157 -20
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 47/-20) Total: 27 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Because the parser does not recursively parse parameter expansion
with respect to quotes, we can't accurately determine quote status at
parse time. This patch works around this by moving the quote detection
to run-time where we do interpret it recursively.
Test case:
foo=\\ echo "<${foo#[\\]}>"
Old result:
<\>
New result:
<>
Do not quote back slashes in parameter expansions outside quotes.
Test case:
a=/b/c/*
b=\\
echo ${a%$b*}
Old result:
/b/c/*
New result:
/b/c/
Based on commits 880d952, 7cfd8be, 0d7d660 and a7c21a6 from
git://git.kernel.org/pub/scm/utils/dash/dash.git by Herbert Xu
function old new delta
argstr 1164 1193 +29
memtodest 147 174 +27
subevalvar 1153 1177 +24
redirect 1279 1282 +3
dolatstr 5 7 +2
static.spclchars 10 9 -1
expandarg 962 960 -2
evalcase 273 271 -2
evalcommand 1204 1197 -7
rmescapes 236 227 -9
preglob 27 8 -19
evalvar 604 582 -22
cmdputs 389 334 -55
readtoken1 3163 3061 -102
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/9 up/down: 85/-219) Total: -134 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
