iigs-game-engine/ref/GTE.Inline.s

133 lines
4.5 KiB
ArmAsm
Raw Permalink Normal View History

2020-08-23 05:25:39 +00:00
; Template and utility function for a single line of the GTE blitter. See the other GTE.Line.s file
; for details on the general structure of this template.
;
; This is a variant that places the snippets inline within the code field. We give up
; the speed of three-byte code sequences, but eliminate the double JMP and simplify the
; handling of odd-alignment.
;
; This mode is best when the scenes are always complicated.
;
; Odd:
MX %00
entry_1 ldx #0000 ; patch with the address of the direct page tiles. Fixed.
entry_2 ldy #0000 ; patch with the address of the line in the second layer. Set when BG1 scroll position changes.
entry_3 lda #0000 ; patch with the address of the right edge of the line. Set when origin position changes.
tcs
entry_jmp jmp $2000 ; always jump into the same location. For odd line, the end
; ; of the snippet will be patched to handle the right-edge case.
right_odd sep #$20 ; enter here from the code field
pha
rep #$20
jmp $2000 ; jump back into the code field
jmp odd_exit
jmp even_exit
; Code field, each block is N bytes
loop
lda #1234 ; PEA $0000 becomes LDA #0000 / BRA / PHA
bra l0
jmp exit ; 'normal' exit point
jmp left_odd ; handler for pushing a single byte to the left edge
jmp right_odd ; handler for pushing a single byte to the right edge
l0 pha ; always end with a PHA, this is the patch point
lda (00),y ;
and #MASK
ora #data
bra l1
jmp exit ; 'normal' exit point
jmp left_odd ; handler for pushing a single byte to the left edge
jmp right_odd ; handler for pushing a single byte to the right edge
l0 pha ; always end with a PHA, this is the patch point
...
jmp loop
jmp even_exit
left_odd sep #$20
xba
pha
rep #$20
exit jmp $0000 ; Jump to the next line. We set up the blitter to do 8 or 16 lines at a time
; ; before restoring the machine state and re-enabling interrupts. This makes
; ; the blitter interrupt friendly to allow things like music player to continue
; ; to function.
;
; ; When it's time to exit, the next_entry address points to an alternate exit point
; These are the special code snippets -- there is a 1:1 relationship between each snippet space
; and a 3-byte entry in the code field. Thus, each snippet has a hard-coded JMP to return to
; the next code field location
;
; The snippet is required to handle the odd-alignment in-line; there is no facility for
; patching or intercepting these values due to their complexity. The only requirements
; are:
;
; 1. Carry Clear -> 16-bit write and return to the next code field operand
; 2. Carry Set
; a. Overflow set -> Low 8-bit write and return to the next code field operand
; b. Overflow clear -> High 8-bit write and exit the line
; c. Always clear the Carry flags. It's actually OK to leave the overflow bit in
; its passed state, because having the carry bit clear prevent evaluation of
; the V bit.
;
; Snippet Samples:
;
; Standard Two-level Mix (27 bytes)
;
; Optimal = 18 cycles (LDA/AND/ORA/PHA)
; 16-bit write = 23 cycles
; 8-bit low = 35 cycles
; 8-bit high = 36 cycles
;
; start lda (00),y
; and #MASK
; ora #DATA ; 14 cycles to load the data
; bcs 8_bit
; pha
; out jmp next ; Fast-path completes in 9 additional cycles
; 8_bit sep #$30 ; Switch to 8 bit mode
; bvs r_edge ; Need to switch if doing the left edge
; xba
; r_edge pha ; push the value
; rep #$31 ; put back into 16-bit mode and clear the carry bit, as required
; bvs out ; jmp out and continue if this is the right edge
; jmp even_exit ; exit the line otherwise
; ;
; ; The slow paths have 21 and 22 cycles for the right and left
; ; odd-aligned cases respectively.
snippets ds 32*82