Add photos and some detail to assembly

This commit is contained in:
Eric Helgeson 2021-02-01 18:12:22 -06:00
parent 0946f13eb8
commit 388247b771
6 changed files with 54 additions and 36 deletions

View File

@ -50,42 +50,7 @@ Tested on a Color Classic with [SCSI Director Pro 4](https://macintoshgarden.org
## Assembly ## Assembly
1. Solder on the surface mount SD Card holder. Using the [Drag Solder](https://www.youtube.com/watch?v=nyele3CIs-U&start=34) technique. See [Assembly.md](docs/assembly.md)
- Once on, check continuity of all connections. Fixing this after the BluePill is on will be difficult.
1. Solder the dioeds to the bottom of the board. Be sure they are flush as possible to the bottom.
1. Solder the header pins on to the BluePill. Then the blue pill to the BlueSCSI PCB.
- Correct orientation is having the USB should be over the SD Card holder.
1. Solder on the Resistor nets. Pin one is marked on the board and the resistors.
1. Solder on the Termination Jumpers & place the jumpers on.
1. Solder the 50 Pin headers on.
1. Optional - Solder on the berg connector. Only needed if your machine does not supply enough power via the SCSI bus.
1. Optional - Solder on the debug headers near the SD card. Only nessissarry if re-programming.
### Version 1.0-b BOM
STM32F103C8T6 (U1) aka BluePill board. Beware of fake/scams. Look for reviews. Amazon, ebay, etc.
Mouser Cart https://www.mouser.com/ProjectManager/ProjectDetail.aspx?State=EDIT&ProjectGUID=db967d46-a51a-4a0e-a350-8f503b2f02cf
* 2x 330 (RN2, RN4) Resistor nets https://www.mouser.com/ProductDetail/652-4610X-1LF-330
* 2x 220 (RN1, RN3) Resistor nets https://www.mouser.com/ProductDetail/652-4610X-1LF-220
* 2x Diodes https://www.mouser.com/ProductDetail/583-1N5818-T
* SD Card Holder (J1) https://www.mouser.com/ProductDetail/538-104031-0811
* Headers https://www.mouser.com/ProductDetail/872-920-0011-01
* 50 PIN SCSI header https://www.mouser.com/ProductDetail/517-30350-6002/
- May substitute with 2 rows of headers from above.
- **Note on Right angle connectors** - it appears Right angle headers are notched differently then the pin out. Be sure to note PIN 1/red stripe on the cable match up.
### Optional
Floppy/Berg Power header https://www.mouser.com/ProductDetail/571-1718254
- Required if your machine does not supply power via TERM POWER. For example a Mac Plus or Mac with a Analog/PSU board that has not been recapped.
## Usage ## Usage
Hard Disk image files are placed in the root directory of a `FAT32` (or `ExFat`) formatted SD card. You can create a disk image using `dd` or download one from the `blank_images.zip` file. These images are compatible with the RaSCSI device and Basilisk II emulator. Hard Disk image files are placed in the root directory of a `FAT32` (or `ExFat`) formatted SD card. You can create a disk image using `dd` or download one from the `blank_images.zip` file. These images are compatible with the RaSCSI device and Basilisk II emulator.

53
docs/assembly.md Normal file
View File

@ -0,0 +1,53 @@
# Assembly
## Before you start
Read through all instructions before starting.
## Building
1. Solder on the surface mount SD Card holder. Use the [Drag Solder](https://www.youtube.com/watch?v=nyele3CIs-U&start=34) technique.
- Once on, check continuity of all connections. Fixing this after the BluePill is on will be difficult.
- Ensure the SD card fits and you dont have too much solder on the sides or contacts
2. Solder the dioeds to the **bottom** of the board. Be sure they are flush as possible to the bottom.
[Diode Orientation](images/diodes.png)
3. Solder the header pins on to the BluePill. Then BluePill pill to the BlueSCSI PCB.
- Correct orientation is having the USB connector of the BluePill should be over the SD Card holder.
4. Solder on the Resistor nets. Pin one is marked on the board and the resistors.
- 220 RNETS are closest to the BluePill
- Note PIN one on each - they are opposite of eachtoher. See photo.
- 330 RNETS are furthest from the BluePill
- Note PIN one on each - they are opposite of eachtoher. See photo.
[Orientation RNETs and BluePill](images/orientation.png)
1. Solder on the Termination Jumpers & place the jumpers on to enable Termiation
2. Solder the 50 Pin headers on.
1. Note Pin 1 and Box header on the silk screen.
3. Optional - Solder on the berg connector. Only needed if your machine does not supply enough power via the SCSI bus.
4. Optional - Solder on the debug headers near the SD card. Only nessissarry if re-programming.
[Fully Assembled](images/assembled.png)
### Version 1.0-b BOM
STM32F103C8T6 (U1) aka BluePill board. Beware of fake/scams. Look for reviews. Amazon, ebay, etc.
Mouser Cart https://www.mouser.com/ProjectManager/ProjectDetail.aspx?State=EDIT&ProjectGUID=db967d46-a51a-4a0e-a350-8f503b2f02cf
* 2x 330 (RN2, RN4) Resistor nets https://www.mouser.com/ProductDetail/652-4610X-1LF-330
* 2x 220 (RN1, RN3) Resistor nets https://www.mouser.com/ProductDetail/652-4610X-1LF-220
* 2x Diodes https://www.mouser.com/ProductDetail/583-1N5818-T
* SD Card Holder (J1) https://www.mouser.com/ProductDetail/538-104031-0811
* Headers https://www.mouser.com/ProductDetail/872-920-0011-01
* 50 PIN SCSI header https://www.mouser.com/ProductDetail/517-30350-6002/
- May substitute with 2 rows of headers from above.
- **Note on Right angle connectors** - it appears Right angle headers are notched differently then the pin out. Be sure to note PIN 1/red stripe on the cable match up.
### Optional
Floppy/Berg Power header https://www.mouser.com/ProductDetail/571-1718254
- Required if your machine does not supply power via TERM POWER. For example a Mac Plus or Mac with a Analog/PSU board that has not been recapped.

BIN
docs/images/assembled.png Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 1.3 MiB

BIN
docs/images/diodes.png Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 743 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 17 MiB

BIN
docs/images/orientation.png Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 571 KiB