Add non-editable mouser project

docs/assembly.md

@@ -36,6 +36,12 @@ The community has created a few assembly videos:
 
 ### Version 1.0-b & 1.0-c BOM
 
+#### Mouser Cart
+
+https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c5cc83feff
+
+#### Parts
+
 STM32F103C8T6 (U1) aka BluePill board. Beware of fake/scams. Look for reviews. Amazon, ebay, etc.
 
 * 2x 330 (RN2, RN4) Resistor nets https://www.mouser.com/ProductDetail/652-4610X-1LF-330

docs/build-your-own.adoc

@@ -21,26 +21,7 @@ Order the boards from https://jlcpcb.com/ or your manufactuer of choice.
 
 #### Version 1.0-b & 1.0-c BOM
 
-STM32F103C8T6 (U1) aka BluePill board. Beware of fake/scams. Look for reviews. Amazon, ebay, etc.
-
-* 2x 330 (RN2, RN4) Resistor nets https://www.mouser.com/ProductDetail/652-4610X-1LF-330
-
-* 2x 220 (RN1, RN3) Resistor nets https://www.mouser.com/ProductDetail/652-4610X-1LF-220
-
-* 2x Diodes https://www.mouser.com/ProductDetail/583-1N5818-T
-
-* SD Card Holder (J1)  https://www.mouser.com/ProductDetail/538-104031-0811
-
-* Headers https://www.mouser.com/ProductDetail/872-920-0011-01
-
-* 50 PIN SCSI header https://www.mouser.com/ProductDetail/517-30350-6002/
-  - May substitute with 2 rows of headers from above.
-  - **Note on Right angle connectors** - it appears Right angle headers are notched differently then the pin out. Be sure to note PIN 1/red stripe on the cable match up.
-
-#### Optional
-
-Floppy/Berg Power header https://www.mouser.com/ProductDetail/571-1718254
-  - Required if your machine does not supply power via TERM POWER. For example a Mac Plus or Mac with a Analog/PSU board that has not been recapped.
+https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c5cc83feff
 
 ### BluePill