Merge pull request #51 from TomRBarber/patch-1

Update assembly.md
This commit is contained in:
Eric Helgeson 2021-10-08 20:04:42 -05:00 committed by GitHub
commit 979448853d
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -16,7 +16,7 @@ The community has created a few assembly videos:
1. Solder on the surface mount SD Card holder. Use the [Drag Solder](https://youtu.be/Z_KL4fWOMug) technique. 1. Solder on the surface mount SD Card holder. Use the [Drag Solder](https://youtu.be/Z_KL4fWOMug) technique.
- Once on, check continuity of all connections. Fixing this after the BluePill is on will be difficult. - Once on, check continuity of all connections. Fixing this after the BluePill is on will be difficult.
- Ensure the SD card fits and you dont have too much solder on the sides or contacts - Ensure the SD card fits and you dont have too much solder on the sides or contacts
2. Solder the dioeds to the **bottom** of the board. Be sure they are flush as possible to the bottom. 2. Solder the diodes to the **bottom** of the board. Be sure they are flush as possible to the bottom.
![Diode Orientation](images/diodes.png) ![Diode Orientation](images/diodes.png)
3. Solder the header pins on to the BluePill. Then BluePill pill to the BlueSCSI PCB. 3. Solder the header pins on to the BluePill. Then BluePill pill to the BlueSCSI PCB.
- Correct orientation is having the USB connector of the BluePill should be over the SD Card holder. - Correct orientation is having the USB connector of the BluePill should be over the SD Card holder.