Update README.md

This commit is contained in:
Eric Helgeson 2021-01-19 21:14:05 -06:00 committed by Eric Helgeson
parent 0a177506dd
commit ff4c8a7115

View File

@ -37,17 +37,21 @@ Plus
## Performance ## Performance
Tested on a Color Classic with [SCSI Director Pro 4](https://macintoshgarden.org/apps/scsi-director-pro-40)
```
1012KB/Sec Write 1012KB/Sec Write
900KB/Sec Read 900KB/Sec Read
1.01ms Seek 1.01ms Seek
```
## Assembly ## Assembly
1. Solder on the surface mount SD Card holder. Using the [Drag Solder](https://www.youtube.com/watch?v=nyele3CIs-U&start=34) technique. 1. Solder on the surface mount SD Card holder. Using the [Drag Solder](https://www.youtube.com/watch?v=nyele3CIs-U&start=34) technique.
- Once on, check continuity of all connections. Fixing this after the BluePill is on will be difficult. - Once on, check continuity of all connections. Fixing this after the BluePill is on will be difficult.
1. Solder the dioeds to the bottom of the board. Be sure they are flush as possible to the bottom. 1. Solder the dioeds to the bottom of the board. Be sure they are flush as possible to the bottom.
1. Solder the header pins on to the BluePill. Then the blue pill to the BlueSCSI PCB. 1. Solder the header pins on to the BluePill. Then the blue pill to the BlueSCSI PCB.
- Correct orientation is having the USB should be over the SD Card holder. - Correct orientation is having the USB should be over the SD Card holder.
1. Solder on the Resistor nets. Pin one is marked on the board and the resistors. 1. Solder on the Resistor nets. Pin one is marked on the board and the resistors.
1. SOlder on the Termination Jumpers & place the jupmpers on. 1. SOlder on the Termination Jumpers & place the jupmpers on.
1. Solder the 50 Pin headers on. 1. Solder the 50 Pin headers on.