BlueSCSI/docs/build-your-own.adoc
2022-01-24 15:24:04 -06:00

61 lines
1.6 KiB
Plaintext

# Build Your Own
These instructions will guide you thorugh purchasing all of the parts needed to assemble kits for yourselves and for friends! Please note the hardware is licensed non-comercial.
If you'd like to buy the kits pre-packaged/pre-flashed or fully assembled we have a network of makers here to help you out at https://scsi.blue
## Order Parts
Updated for 1.0-c.
### PCB's
Grab the latest Gerbers. Gerber files tell the PCB manufactuer how to create the BlueSCSI boards.
https://github.com/erichelgeson/BlueSCSI/tree/main/hw/
Order the boards from https://jlcpcb.com/ or your manufactuer of choice.
### Components
#### Version 1.0-c, 1.1-a BOM
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c5cc83feff
### BluePill
Buy from a place where returns are easy. Ensure the photo in the listing shows a chip that says STM32 on it.
https://www.amazon.com/s?k=stm32f103c8t6
https://www.ebay.com/sch/i.html?_nkw=stm32f103c8t6
### STlinkV2
You can usually find these bundled with the bluepill or at the same store you bought your bluepill.
## Assemble
Follow the guide on component orientation and assembly.
https://github.com/erichelgeson/BlueSCSI/blob/main/docs/assembly.md
## 3D Case
Print or order a 3D case for your BlueSCSI to mount it inside your computer.
https://github.com/erichelgeson/BlueSCSI/tree/main/3D-Files
## Flash
You will need to flash the BlueSCSI program onto your BluePill following these instructions.
https://github.com/erichelgeson/BlueSCSI#flashing
## Usage
Be sure to follow the usage instructions for getting your drive images setup:
https://github.com/erichelgeson/BlueSCSI#usage