BlueSCSI/docs/1.0b-to-1.0c.adoc
Ryan Schmidt d5405ab5f0
Fix typos
2022-06-17 06:52:11 -05:00

28 lines
892 B
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# BlueSCSI 1.0-b to 1.0-c
:toc: macro
## Introduction
1.0-c was a small change to fix an issue with machines that provide low or no `TERMPOWER` over the SCSI bus. If you received a fully-assembled BlueSCSI after April 1st, 2021 then this was done for you. If you have a kit labeled 1.0-b you can make these modifications to become a 1.0-c.
## Steps
### Disconnect `TERMPOWER` from 220 Pull Up Jumper
Use a cutting tool to cut the small trace between the `TERMPOWR` and 220 Pull Up Jumper pictured below.
Make sure continuity from `TERMPOWER` to the diode still flows correctly but is disconnected from the jumper.
image::images/1.0-b-bodge-1.jpg[]
### Connect 5V to 220 Pull Up Jumper
Now we will provide pull up from the 5V provided by the BluePill.
image::images/1.0-b-bodge-2.png[]
### Complete!
Thats it! 5V to the Pull Up resistors will now work when powered externally.