mirror of
https://github.com/erichelgeson/BlueSCSI.git
synced 2024-06-25 20:29:28 +00:00
Updated Flashing (markdown)
parent
0431a8d658
commit
6a09e5e8f4
10
Flashing.md
10
Flashing.md
|
@ -12,9 +12,9 @@ When flashing you have two options:
|
||||||
|
|
||||||
1. You may also flash the `.bin` file directly from [STM32CubeProgrammer](https://www.st.com/en/development-tools/stm32cubeprog.html). Use this method if you are not a developer and just wish to get the code to the BluePill.
|
1. You may also flash the `.bin` file directly from [STM32CubeProgrammer](https://www.st.com/en/development-tools/stm32cubeprog.html). Use this method if you are not a developer and just wish to get the code to the BluePill.
|
||||||
|
|
||||||
## Using STLink v2
|
### Using STLink v2
|
||||||
|
|
||||||
### Setup STLinkV2
|
#### Setup STLinkV2
|
||||||
|
|
||||||
Be sure to buy the "Clone" STLink V2 programmer - **the official STLink programmer does not work**.
|
Be sure to buy the "Clone" STLink V2 programmer - **the official STLink programmer does not work**.
|
||||||
|
|
||||||
|
@ -25,7 +25,7 @@ Be sure to buy the "Clone" STLink V2 programmer - **the official STLink programm
|
||||||
* Connect pins `SWDIO`, `GND`, `SWCLK`, and `3.3v` from the programmer to the Blue Pill.
|
* Connect pins `SWDIO`, `GND`, `SWCLK`, and `3.3v` from the programmer to the Blue Pill.
|
||||||
* NOTE: These are not the same as Serial ports.
|
* NOTE: These are not the same as Serial ports.
|
||||||
|
|
||||||
### Procedure (STM32CubeProgrammer)
|
#### Procedure (STM32CubeProgrammer)
|
||||||
|
|
||||||
* Remove SD Card
|
* Remove SD Card
|
||||||
* Open STM32CubeProgrammer
|
* Open STM32CubeProgrammer
|
||||||
|
@ -37,7 +37,7 @@ Be sure to buy the "Clone" STLink V2 programmer - **the official STLink programm
|
||||||
* Push the reset button on the BluePill
|
* Push the reset button on the BluePill
|
||||||
* You should see the LED `PC_13` flashing 5x indicating no SD Card detected.
|
* You should see the LED `PC_13` flashing 5x indicating no SD Card detected.
|
||||||
|
|
||||||
### Procedure (PlatformIO)
|
#### Procedure (PlatformIO)
|
||||||
|
|
||||||
* Remove SD Card
|
* Remove SD Card
|
||||||
* Move the `BOOT0` jumper (furthest from the button switch) to `1`
|
* Move the `BOOT0` jumper (furthest from the button switch) to `1`
|
||||||
|
@ -68,7 +68,7 @@ xPSR: 0x01000000 pc: 0x08000194 msp: 0x20000690
|
||||||
|
|
||||||
The following YouTube video demonstrates the steps of flashing & updating your BlueSCSI https://www.youtube.com/watch?v=bRLAOts_MTM
|
The following YouTube video demonstrates the steps of flashing & updating your BlueSCSI https://www.youtube.com/watch?v=bRLAOts_MTM
|
||||||
|
|
||||||
## Trouble Shooting
|
### Trouble Shooting
|
||||||
|
|
||||||
Move the jumper furthest away from the `RESET` switch to 1. Reset and try to program again.
|
Move the jumper furthest away from the `RESET` switch to 1. Reset and try to program again.
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue
Block a user