Macintosh-HW/BlueSCSI
1
0
Fork 0
mirror of https://github.com/erichelgeson/BlueSCSI.git synced 2024-11-22 06:32:16 +00:00
Code Issues Projects Releases Wiki Activity

Updated BlueSCSI 1.1 Desktop Assembly (markdown)

Eric Helgeson 2022-05-09 16:18:34 -05:00
parent cfcafc80a3
commit a49046abeb
1 changed files with 3 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
BlueSCSI-1.1-Desktop-Assembly.md

@ -30,7 +30,9 @@ None yet
2. Solder the 2 diode to the board, ensure it is as flush with the PCB as possible. Trim the excess legs 2. Solder the 2 diode to the board, ensure it is as flush with the PCB as possible. Trim the excess legs
3. Solder on the resistor nets ensuring correct placement and orientation 3. Solder on the resistor nets ensuring correct placement and orientation.
* Note: Pin 1 on the resistor nets is denoted with a dot. That must line up with the square silk screen on the board denoting pin 1.
4. Solder on the Termination Jumpers & place the jumpers on to enable Termination 4. Solder on the Termination Jumpers & place the jumpers on to enable Termination
5. Solder on the berg connector. Only needed if your machine does not supply enough power via the SCSI bus, but recommended to solder on if you have the connector 5. Solder on the berg connector. Only needed if your machine does not supply enough power via the SCSI bus, but recommended to solder on if you have the connector